KIND Scenery-trackside provides the basis for all track-attached scenery assets, such as trackside signs and devices.
|
|||
|
This asset type inherits all map object characteristics except positioning, and adds trackside positioning and TrackSearch semantics.
The config.txt file for a KIND Scenery-trackside asset has the same kind scenery entry as kind scenery for historical reasons, however the two kinds are quite distinct and should not be confused. A KIND Scenery-trackside will contain a trackside tag, whereas KIND Scenery does not.
KIND Hierarchy
editParent Classes
editChild Classes
editSupported Tags
editEach trackside asset supports the following tags. Each tag is shown here with its default value.
trackside 0 speedlimit 0 buffer-speed 0 follow-gradient 0 trackmark 0 search-limit 0 placeable-on-splines-of-group { }
buffer-speed
edit- Type: Decimal
- Desc: Used for buffers, this sets the maximum speed, in meters per second, at which the buffer can stop a train. If the Train passes the track-side object travelling faster than the buffer speed it will derail. If it's traveling below, or equal, to the buffer speed the train will stop harmlessly.
follow-gradient
edit- Type: Boolean
- Desc: Specifies that the object should be vertically perpendicular to the track gradient when placed. If 0 (default) the asset will point straight up.
placeable-on-splines-of-group
edit- Introduced:trainz-build 3.5
- Type: KUID list container, TBD.
- Desc: A list of KIND Asset-group describing the spline types on which this trackside object may be placed. This object cannot be placed on a spline unless the spline is a member of one of the groups specified here. If not specified, the list defaults to a single entry, Asset-groups <kuid:30501:100043>.
search-limit
edit- Type: Boolean
- Desc: Search limit objects are used by the Driver AI and indicate the direction of travel for a section of track.
speedlimit
edit- Type: Decimal
- Desc: Sets the speed limit, in meters per second, for the track it is placed on, after the object. If this tag is provided with no value, the speed limit will be set to 100m/s.
trackmark
edit- Type: Boolean
- Desc: Specifies if the object is a trackmark. Trackmarks can be used to place consists in [[Scripting|TrainzScript}}.
trackside
edit- Type: Float
- Compulsory: 3.4
- Desc: The distance, in meters, the object will be placed from the center of the track. Negative values will put the object on the left side of the track, and positive values will place it on the right.
Example Config.txt
editSample config.txt file for a trackside asset, with the Standard Tags excluded for brevity:
kind "scenery" trackside -2.8 light 1 follow-gradient 0 mesh-table { default { mesh "CatchPoint.im" auto-create 1 } }
Downloads
editAttach sample files here?
Notes
editFootnotes
editThis reference page is adapted from the TrainzOnline Wiki under the CC-BY-SA 3.0 License. This page will likely include more textual explanations, exposition, history, and/or examples than the source page on the same topic. The TrainzOnline Wiki is for the most part maintained by the programmers or knowledgeable content creators and may have newer more up-to-date information on the current trainz-build code standards, which have some tendency to change as features are added to the software. |