Template:360 opcode RR
| RR Instruction (2 bytes) | |||
| Byte 1 bits (0-7) |
Byte 2 | ||
|
target register (8-11) |
source register (12-15) | ||
| (in hex) | Opcode {{{1}}} |
(4 bits) 0..F / (dec 0..15) |
(4 bits) 0..F / (dec 0..15) |
- The first argument is a target register which value is affected by the instruction.
- The second argument is the source register.
- The target register and source register values are 0 to 15.
Usage for this template:
- {{360 opcode RR|opcode}}
- {{360 opcode RR|opcode|M}} or
- {{360 opcode RR|opcode|B}} or
- {{360 opcode RR|opcode|B}} or
- {{360 opcode RR|opcode|E}} or
Where opcode is the 2-digit hexadecimal opcode value (4 digits for type "E") and the optional value of
- M is used when the first parameter is a mask rather than a register
- B when the second parameter contains a branch address
- I when the only parameter is an 8-bit immediate value (the SVC instruction)
- E when the instruction uses a 16-bit opcode