Introductory Chemistry Online/Printable version
This is the print version of Introductory Chemistry Online You won't see this message or any elements not part of the book's content when you print or preview this page. |
The current, editable version of this book is available in Wikibooks, the open-content textbooks collection, at
https://en.wikibooks.org/wiki/Introductory_Chemistry_Online
Measurements and Atomic Structure
(Work in Progress)
Chapter 1: Measurements and Atomic Structure
editChemistry is the study of matter and the ways in which different forms of matter combine with each other. You study chemistry because it helps you to understand the world around you. Everything you touch or taste or smell is a chemical, and the interactions of these chemicals with each other define our universe. Chemistry forms the fundamental basis for biology and medicine. From the structure of proteins and nucleic acids, to the design, synthesis and manufacture of drugs, chemistry allows you an insight into how things work. Chapter One in this text will introduce you to matter, atoms and their structure. You will learn the basics of scientific measurement and you will gain an appreciation of the scale of chemistry; from the tiniest atom to the incredibly large numbers dealt with in the “mole concept” (Chapter 4). Chapter One lays the foundation on which we will build our understanding.
1.1 Why Study Chemistry?
editChemistry is the branch of science dealing with the structure, composition, properties, and the reactive characteristics of matter. Matter is anything that has mass and occupies space. Thus, chemistry is the study of literally everything around us – the liquids that we drink, the gasses we breathe, the composition of everything from the plastic case on your phone to the earth beneath your feet. Moreover, chemistry is the study of the transformation of matter. Crude oil is transformed into more useful petroleum products such as gasoline and kerosene by the process of refining. Some of these products are further transformed into plastics. Crude metal ores are transformed into metals, that can then be fashioned into everything from foil to automobiles. Potential drugs are identified from natural sources, isolated and then prepared in the laboratory. Their structures are systematically modified to produce the pharmaceuticals that have led to vast advances in modern medicine. Chemistry is at the center of all of these processes and chemists are the people that study the nature of matter and learn to design, predict and control these chemical transformations. Within the branches of chemistry you will find several apparent subdivisions. Inorganic chemistry, historically, focused on minerals and metals found in the earth, while organic chemistry dealt with carbon-containing compounds that were first identified in living things. Biochemistry is an outgrowth of the application of organic chemistry to biology and relates to the chemical basis for living things. In the later chapters of this text we will explore organic and biochemistry in a bit more detail and you will notice examples of organic compounds scattered throughout the text. Today, the lines between the various fields have blurred significantly and a contemporary chemist is expected to have a broad background in all of these areas.Figure 1.1
In this chapter we will discuss some of the properties of matter, how chemists measure those properties and we will introduce some of the vocabulary that is used throughout chemistry and the other physical sciences.
Let’s begin with matter. Matter is defined as any substance that has mass. It’s important to distinguish here between weight and mass. Weight is the result of the pull of gravity on an object. On the Moon, an object will weigh less than the same object on Earth because the pull of gravity is less on the Moon. The mass of an object, however, is an inherent property of that object and does not change, regardless of location, gravitational pull, or whatever. It is a property that is solely dependent on the quantity of matter within the object.
Contemporary theories suggests that matter is composed of atoms. Atoms themselves are constructed from neutrons, protons and electrons, along with an ever-increasing array of other subatomic particles. We will focus on the neutron, a particle having no charge, the proton, which carries a positive charge, and the electron, which has a negative charge. Atoms are incredibly small. To give you an idea of the size of an atom, a single copper penny contains approximately 28,000,000,000,000,000,000,000 atoms (that’s 28 sextillion)Figure 1.2. Because atoms and subatomic particles are so small, their mass is not readily measured using pounds, ounces, grams or any other scale that we would use on larger objects. Instead, the mass of atoms and subatomic particles is measured using atomic mass units (abbreviated amu). The atomic mass unit is based on a scale that relates the mass of different types of atoms to each other (using the most common form of the element carbon as a standard). The amu scale gives us a convenient means to describe the masses of individual atoms and to do quantitative measurements concerning atoms and their reactions. Within an atom, the neutron and proton both have a mass of one amu; the electron has a much smaller mass (about 0.0005 amu).
Atomic theory places the neutron and the proton in the center of the atom in the nucleus. In an atom, the nucleus is very small, very dense, carries a positive charge (from the protons) and contains virtually all of the mass of the atom. Electrons are placed in a diffuse cloud surrounding the nucleus. The electron cloud carries a net negative charge (from the charge on the electrons) and in a neutral atom there are always as many electrons in this cloud as there are protons in the nucleus (the positive charges in the nucleus are balanced by the negative charges of the electrons, making the atom neutral).
An atom is characterized by the number of neutrons, protons and electrons that it possesses. Today, we recognize at least 116 different types of atoms, each type having a different number of protons in its nucleus. These different types of atoms are called elements. The neutral element hydrogen (the lightest element) will always have one proton in its nucleus and one electron in the cloud surrounding the nucleus. The element helium will always have two protons in its nucleus. It is the number of protons in the nucleus of an atom that defines the identity of an element. Elements can, however, have differing numbers of neutrons in their nucleus. For example, stable helium nuclei exists that contain one, or two neutrons (but they all have two protons). These different types of helium atoms have different masses (3 or 4 amu) and they are called isotopes. For any given isotope, the sum of the numbers of protons and neutrons in the nucleus is called the mass number. All elements exist as a collection of isotopes, and the mass of an element that we use in chemistry, the atomic mass, is the average of the masses of these isotopes. For helium, there is approximately one isotope of Helium-3 for every million isotopes of Helium-4, hence the average atomic mass is very close to 4 (4.002602).
As different elements were discovered and named, abbreviations of their names were developed to allow for a convenient chemical shorthand. The abbreviation for an element is called its chemical symbol. A chemical symbol consists of one or two letters, and the relationship between the symbol and the name of the element is generally apparent. Thus helium has the chemical symbol He, nitrogen is N, and lithium is Li. Sometimes the symbol is less apparent but is decipherable; magnesium is Mg, strontium is Sr, and manganese is Mn. Symbols for elements that have been known since ancient times, however, are often based on Latin or Greek names and appear somewhat obscure from their modern English names. For example, copper is Cu (from cuprum), silver is Ag (from argentum), gold is Au (from aurum), and iron is (Fe from ferrum). Throughout your study of chemistry, you will routinely use chemical symbols and it is important that you begin the process of learning the names and chemical symbols for the common elements. By the time you complete General Chemistry, you will find that you are adept at naming and identifying virtually all of the 116 known elements. Table 1.1 contains a starter list of common elements that you should begin learning now!
Element | Chemical Symbol | Element | Chemical Symbol |
---|---|---|---|
Hydrogen | H | Phosphorus | P |
Helium | He | Sulfur | S |
Lithium | Li | Chlorine | Cl |
Beryllium | Be | Argon | Ar |
Boron | B | Potassium | K |
Carbon | C | Calcium | Ca |
Nitrogen | N | Iron | Fe |
Oxygen | O | Copper | Cu |
Fluorine | F | Zinc | Zn |
Neon | Ne | Bromine | Br |
Sodium | Na | Silver | Ag |
Magnesium | Mg | Iodine | I |
Aluminum | Al | Gold | Au |
Silicon | Si | Lead | Pb |
The chemical symbol for an element is often combined with information regarding the number of protons and neutrons in a particular isotope of that atom to give the atomic symbol. To write an atomic symbol, you begin with the chemical symbol, then write the atomic number for the element (the number of protons in the nucleus) as a subscript, preceding the chemical symbol. Directly above this, as a superscript, now write the mass number for the isotope, that is, the total number of protons and neutrons in the nucleus. Thus, for helium, the atomic number is 2 and there are two neutrons in the nucleus for the most common isotope (see Figure 1.3), making the atomic symbol . In the definition of the atomic mass unit, the “most common isotope of carbon”, , is defined as having a mass of exactly 12 amu and the atomic masses of the remaining elements are based on their masses relative to this isotope. Chlorine (chemical symbol Cl) consists of two major isotopes, one with 18 neutrons (the most common, comprising 75.77% of natural chlorine atoms) and one with 20 neutrons (the remaining 24.23%). The atomic number of chlorine is 17 (it has 17 protons in its nucleus), therefore the chemical symbols for the two isotopes are and .Figure 1.5a
When data is available regarding the natural abundance of various isotopes of an element, it is simple to calculate the average atomic mass. In the example above, was the most common isotope with an abundance of 75.77% and had an abundance of the remaining 24.23%. To calculate the average mass, first convert the percentages into fractions; that is, simply divide them by 100. Now, chlorine-35 represents a fraction of natural chlorine of 0.7577 and has a mass of 35 (the mass number). Multiplying these, we get (0.7577 × 35) = 26.51. To this, we need to add the fraction representing chlorine-37, or (0.2423 × 37) = 8.965; adding, (26.51 + 8.965) = 35.48, which is the weighted average atomic mass for chlorine. Whenever we do mass calculations involving elements or compounds (combinations of elements), we always need to use average atomic masses.
1.2 Organization of the Elements: The Periodic Table
editThe number of protons in the nucleus of an element is called the atomic number of that element. Chemists typically place elements in order of increasing atomic numbers in a special arrangement that is called the periodic table (Figure 1.4).
As you can see from Figure 1.4, the periodic table is not simply a grid of elements arranged numerically. In the periodic table, the elements are arranged in horizontal rows called periods (numbered in blue) and vertically into columns called groups. These groups are numbered by two, somewhat conflicting, schemes. In the simplest presentation, favored by the International Union of Pure and Applied Chemistry (IUPAC), the groups are simply numbered 1-18. The convention in much of the world, however, is to number the first two groups 1A and 2A, the last six groups 3A-8A; the middle ten groups are then numbered 1B-8B (but not in that order!). While the IUPAC numbering appears much simpler, in this text we will use the current USA nomenclature (1A-8A). The reason for this choice will become more apparent in Chapter 3 when we discuss “valence” and electron configuration in more detail. The actual layout of the periodic table is based on the grouping of the elements according to chemical properties. For example, elements in each Group of the periodic table (each vertical column) will share many of the same chemical properties. As we discuss the properties of elements and the ways they combine with other elements, the reasons for this particular arrangement of the periodic table will become more obvious.
As you can see from Figure 1.5, each element in the periodic table is represented by a box containing the chemical symbol, the atomic number (the number of protons in the nucleus) and the atomic mass of the element. Remember that the atomic mass is the weighted average of the masses of all of the natural isotopes of the particular element.
Periodic tables are often colored, or shaded, to distinguish groups of elements that have similar properties or chemical reactivity. The broadest classification is into metals, metalloids (or semi-metals) and nonmetals. The elements in Groups 1A – 8A are called the representative elements and the elements in Groups 3 - 15 are called the transition metals. In Figure 1.6, the metallic elements are shown in purple. Metals are solids (except for mercury), can conduct electricity and are usually malleable (can be rolled into sheets) and are ductile (can be drawn into wires). Metals are usually separated into the main group metals (the elements colored purple in Groups 1A - 5A) and the transition metals (in Groups 3 – 15). Nonmetals (yellow in the Figure) do not conduct electricity (with the exception of carbon in the form of graphite) and have a variety of physical states (some are solids, some liquids and some gasses). Two important subclasses of nonmetals are the halogens (Group 7A) and the inert gasses (or noble gasses; Group 8A). At the border between metals and nonmetals lie the elements boron, silicon, germanium, astatine, antimony and tellurium. These elements share physical properties of metals and nonmetals and are called metalloids, or semi-metals. The common semiconductors silicon and germanium are in this group and it is their unique electrical properties that make transistors and other solid-state devices possible. Later in this book we will see that the position of elements in the periodic table also correlates with their chemical reactivity.
1.3 Scientific Notation
editIn Section 1.1, we stated that a single copper penny contains approximately 28,000,000,000,000,000,000,000 atoms. This is a huge number. If we were to measure the diameter of an atom of hydrogen, it would be about 0.00000000000026 inches across. This is an incredibly small number. Chemists routinely use very large and very small numbers in calculations. In order to allow us to use this range of numbers efficiently, chemists will generally express numbers using exponential, or scientific notation. In scientific notation, a number n is shown as the product of that number and 10, raised to some exponent x; that is, (n × 10x). The number 102 is equal to 100. If we multiply 2 × 102, that is equivalent to multiplying 2 × 100, or 200. Thus 200 can be written in scientific notation as 2 × 102. When we convert a number to scientific notation, we begin by writing a the first (non-zero) digit in the number. If the number contains more than one digit, we write a decimal point, followed by all of the remaining digits. Next we inspect the number to see what power of 10 this decimal must be multiplied by to give the original number. Operationally, what you are doing is moving decimal places. Take the number of atoms in a penny, 28,000,000,000,000,000,000,000. We would begin by writing 2.8. To get the power of 10 that we need, we begin with the last digit in the number and count the number of places that we must move to the left to reach our new decimal point. In this example, we must move 22 places to the left. The number is therefore the product of 2.8 and 1022, and the number is written in scientific notation as 2.8 × 1022.
Let’s look at a very small number; for example, 0.00000000000026 inches, the diameter of a hydrogen atom. We want to place our decimal point between the two and the six. To do this, we have to move the decimal point in our number to the right thirteen places. When you are converting a number to scientific notation and you move the decimal point to the right, the power of 10 must have a negative exponent. Thus our number would be written 2.6 × 1013 inches. A series of numbers in decimal format and in scientific notation are shown in Table 1.2. Figure 1.7 shows a remarkable picture from an atomic force microscope in which individual atoms of sodium and chlorine are visualized on a sodium chloride crystal. In this image, the size of the individual atoms is about 2.6 x 10-13 meters.
Decimal Format | Scientific Notation |
---|---|
274 | 2.74 × 102 |
0.0035 | 3.5 × 10–3 |
60221415 | 6.0221415 × 107 |
0.125 | 1.25 × 10–1 |
402.5 | 4.025 × 102 |
0.0002001 | 2.001 × 10–4 |
10,000 | 1 × 104 |
Exercise 1.1 Conversions between Decimal Format and Scientific Notation
Convert the following numbers into scientific notation:
a. 93,000,000
b. 708,010
c. 0.000248
d. 800.0
Convert the following numbers from scientific notation into decimal format: a. 6.02 × 104
b. 6.00 × 10-4
c. 4.68 × 10-2
d. 9.3 × 107
1.4 SI and Metric Units
editWithin the sciences, we use the system of weights and measures that are defined by the International System of Units which are generally referred to as SI Units. At the heart of the SI system is a short list of base units defined in an absolute way without referring to any other units. The base units that we will use in this text, and later in General Chemistry include the meter (m) for distance, the kilogram (kg) for mass and the second (s) for time. The volume of a substance is a derived unit based on the meter, and a cubic meter (m3) is defined as the volume of a cube that is exactly 1 meter on all edges.
Because most laboratory work that takes place in chemistry is on a relatively small scale, the mass of a kilogram (about 2.2 pounds) is too large to be convenient and the gram is generally utilized, where a gram (g) is defined as 1/1000 kilograms. Likewise, a volume of one cubic meter is too large to be practical in the laboratory and it is common to use the cubic centimeter to describe volume. A cubic centimeter is a cube that is 1/100 meter on each edge, as shown in Figure 1.9; a teaspoon holds approximately 5 cubic centimeters. For liquids and gasses, chemists will usually describe volume using the liter, where a liter (L) is defined as 1000 cubic centimeters.
SI base units are typically represented using the abbreviation for the unit itself, preceded by a metric prefix, where the metric prefix represents the power of 10 that the base unit is multiplied by. The set of common metric prefixes are shown in Table 1.3.
Factor | Name | Symbol |
---|---|---|
10-12 | pico | p |
10-9 | nano | n |
10-6 | micro | µ |
10-3 | milli | m |
10-2 | centi | c |
10-1 | deci | d |
1 | none | |
103 | kilo | k |
106 | mega | M |
109 | giga | G |
Using this Table as a reference, we see the metric symbol “c” represents the factor 10-2; thus writing “cm” is equivalent to writing (10–2 × m). Likewise, we could describe 1/1000 of a meter as mm, where the metric symbol “m” represents the factor 10-3. The set of metric prefixes and their symbols that are shown in Table 1.3 are widely used in chemistry and it is important that you memorize them and become adept at relating the prefix (and its’ symbol) to the corresponding factor of 10.
1.5 Unit Conversion within the Metric System
editBecause chemists often deal with measurements that are both very small (as in the size of an atom) and very large (as in numbers of atoms), it is often necessary to convert between units of metric measurement. For example, a mass measured in grams may be more convenient to work with if it was expressed in mg (10–3 × g). Converting between metric units is an exercise in unit analysis (also called dimensional analysis). Unit analysis is a form of proportional reasoning where a given measurement can be multiplied by a known proportion or ratio to give a result having a different unit, or dimension. For example, if you had a sample of a substance with a mass of 0.0034 grams and you wished to express that mass in mg you could use the following unit analysis:
The given quantity in this example is the mass of 0.0034 grams. The quantity that you want to find is the mass in mg, and the known proportion or ratio is given by the definition of the metric prefix, that is one mg is equal to 10-3 grams. Expressing this as a proportion or ratio, you could say there is one mg per 10-3 grams, or:
Looking at this expression, the numerator, 1 mg, is equivalent to saying 1 × 10–3 g, which is identical to the value in the denominator. This ratio, therefore has a numeric value of one (anything divided by itself is one, by definition). Algebraically, we know that we are allowed to multiply any number by one and that number will be unchanged. If, however, the number has units, and we multiply it by a ratio containing units, the units in the number will multiply and divide by the units of the ratio, giving the original number (remember you are multiplying by one) but with different units. In the present case, if we multiply the given by the known ratio, the unit “g” will cancel, leaving “mg” as the only remaining unit. The original number in grams has therefore been converted to milligrams, the units that you wanted to find.
The method that we used to solve this problem can be generalized as: given × known ratio = find. The given is a numerical quantity (with its units), the known ratio is based on the metric prefixes and is set up so that the units in the denominator of the ratio match the units of given and the units in the numerator match those in find. When these are multiplied, the number from given will now have the units of find. In the ratio used in the example, “g” (the units of given) appear in the denominator and “mg” (the units of find) appear in the numerator.
As an example of a case where the units of the known ratio must be inverted, if you wanted to convert 1.3 × 107 µg into grams, the given would be 1.3 × 107 µg, the find would be grams and the known ratio would be based on the definition of µg as one µg per 10-6 grams. This ratio must be expressed in the solution with µg (the units of given) in the denominator and g (the units of find) in the numerator. The problem is set up as:
Note that instead of “one µg per 10-6 grams”, we must invert the known ratio and state it as either “10-6 grams per 1 µg” so that the units of given (µg) will cancel. We can do this inversion because the ratio still has a numeric value of one.
Simple ratios like these can also be used to convert English measurements in to their metric equivalents. The ratio relating inches to meters is . Thus we could express the distance between atoms in Figure 1.8 as:
Example 1.1 Simple Metric Unit Conversions
Convert the following metric measurements into the indicated units:
- a. 9.3 × 10-4 g into ng
- b. 278 g into mg
Exercise 1.2 Simple Metric Unit Conversions Convert the following metric measurements into the indicated units:
- a. 2,057 grams - as kg
- b. 1.25 × 10-7 meters - as µm
- c. 6.58 × 104 meters - as km
- d. 2.78 × 10-1 grams - as mg
In the examples we have done thus far, we have been able to write a known ratio based on the definition of the appropriate metric prefix. But what if we wanted to take a number that was expressed in milligrams and convert it to a number with the units of nanograms? In a case like this, we need to use two known ratios in sequence; the first with the units of given (mg) in the denominator and the second with the units of find (ng) in the numerator. For example, if we were given 0.00602 mg and asked to find ng, we could set up a ratio based on grams per mg. If we solved the problem at this point, we would have a result with the units of grams. To get a final answer in terms of ng, we would need to multiply this intermediate result (the new given) by a ratio based on nanograms per gram. The complete set-up is shown below:
In the first two terms, the units of “mg” cancel and in the second two terms, “g” cancels leaving only “ng”, the units of find. One of the reassuring pleasures of doing these types of problems is that, if you set up your problem and the units cancel, leaving only the units of find, you know you have set up the problem correctly! All you have to do is to do the sequential calculations and you know your answer is correct!
Exercise 1.3 Sequential Metric Unit Conversions
Convert the following metric measurements into the indicated units:
- a. 2,057 mg - into kg
- b. 1.25 × 10-7 km - into µm
- c. 9.3 × 10-4 pg - into ng
- d. 6.5 × 104 mm - into km
1.6 Significant Figures
editExperimental work in scientific laboratories will generally involve measurement. Whenever we make a measurement, we always strive to make our value as accurate as possible. For example, the ruler in Figure 1.9 can be used to measure the distance between the two red arrows.
The distance is more than 50 mm, the last numbered digit shown before the second arrow. If we look very carefully, we see that the second arrow is about half-way between the fourth and fifth division following the 50 mm mark. The measurement is therefore greater than 54 mm and less than 55 mm and is about 54.5 mm. The last digit in our measurement is estimated, but the first two digits are exact. In any measurement, like this, the last digit that you report is always an estimated digit. If we were to say that the measurement was 54 mm, that would be incorrect, because we know it’s larger. If we were to say the measurement was 54.5567 mm, that would be nonsense because our scale does not show that degree of accuracy. In a measurement in science, the estimated digit is called the least significant digit, and the total number of exact digits plus the estimated digit is called the number of significant figures in the measurement. Thus the measurement in the figure, 54.5, has three significant figures (3 SF). By adhering to this rule, we can look at any measured value and immediately know the accuracy of the measurement that was done. In order to properly interpret the number of significant figures in a measurement, we have to know how to interpret measurements containing zeros. For example, an object is found to have a mass of 602 mg. The last digit (the 2) is estimated and the first two digits are exact. The measurement therefore is accurate to three significant figures. We could also express this measurement in grams using the metric conversion ratio , making the measurement 0.00602 g. We now have three additional digits in our number (called leading zeros), but is our number any more accurate? No; in a measurement, leading zeros (zeros that appear before the number) are never significant.
Let’s consider another measurement; we are told that a distance is 1700 m. The first thing to notice is that this number does not have a decimal point. What this tells us is that the estimated digit in this number is the 7, and that this number only has two significant figures. The last two zeros in this measurement are called trailing zeros; in numbers without a decimal point, trailing zeros are never significant. If, however, the distance was reported as 1700.00 m, the presence of the decimal point would imply that the last zero was the estimated digit (zeros can be estimated too) and this number would have six significant figures. Stated as a rule, in a number containing a decimal point, trailing zeros are always significant. These simple rules for interpreting zeros in measurements are collected in Table 1.4.
Applying these rules to some examples:
- 117.880 m contains six significant figures; the number has a decimal point, so the trailing zero is significant.
- 0.002240 g contains four significant figures; the number has a decimal point so the trailing zero is significant, but the leading zeros are not.
- 1,000,100 contains five significant figures; the number does not have a decimal point, so the trailing zeros are not significant. The zeros between the first and fifth digits, however, are significant.
- 6.022 × 1023 contains four significant figures. In scientific notation, all of the significant figures in a measurement are shown before the exponent. (Remember this when you are converting measurements into scientific notation.)
Exercise 1.4 Significant Figures in Measurements Determine the number of significant figures in each of the following numbers:
- a. 2,057,000
- b. 1.250600
- c. 9.300 × 10-4
- d. 6.05 × 104
1.7 Atomic Theory and Electron Configuration
editAs we learned in Section 1.1, modern atomic theory places protons and neutrons in the nucleus of an atom and electrons are placed in a diffuse cloud surrounding this nucleus. As chemists and physicists began examining the structure of atoms, however, it became apparent that all of the electrons in atoms were not equivalent. The electrons were not randomly placed in one massive “cloud”, rather they seemed to be arranged in distinct energy levels and energy was required to move electrons from a lower to a higher energy level. A mathematical model of atomic structure was developed in the early nineteenth century that defined these energy levels as quantum levels, and today this description is generally referred to as quantum mechanics.
According to the quantum model of the atom, electron for the known elements can reside in seven different quantum levels, denoted by the principal quantum number n, where n has a value of one to seven. As the quantum number increases, the average energy of the electrons having that quantum number also increases. Each of the seven rows in the periodic table shown in Figure 1.5 corresponds to a different quantum number. The first row (n = 1) can only accommodate two electrons. Thus an element in the first row of the periodic table can have no more than two electrons (hydrogen has one, and helium has two). The second row (n = 2) can accommodate eight electrons and an element in the second row of the periodic table will have two electrons in the first level (it is full) and up to eight electrons in the second level.
Quantum theory also tells us that the electrons in a given energy level are not all equivalent. Within an energy level electrons reside within sublevels (or subshells). The sublevels for any given level are identified by the letters, s, p, d and f and the total number of sublevels is also given by the quantum number, n. The s sublevel can accommodate two electrons, the p holds six, the d holds 10 and the f can hold 14. The elements in the first row in the periodic table (n = 1) have electrons only in the 1s sublevel (n = 1, therefore there can only be one sublevel). The single electron in hydrogen would be identified as 1s1 and the two electrons in helium would be identified as 1s2. Fluorine, in the second row of the periodic table (n = 2), has an atomic number of nine and therefore has nine electrons. The electrons in fluorine are arranged, two in the first level (1s2), two in the 2s suborbital (2s2) and five 2p suborbital (2p5). If we were to write the electron configuration for fluorine, we would write it as 1s2 2s2 2p5. Each of the sublevels in an atom is also associated with an orbital, where an orbital is simply a region of space where the electron is likely to be found. Figure 1.10 shows the calculated shapes for the s, p and d orbitals; the shapes of the seven f orbitals are even more complex.
1.8 Filling Orbitals with Electrons
editAs stated above, an s sublevel can accommodate two electrons, the p accommodates six, there can be 10 in the d sublevel and 14 in the f. Although there are two electrons in the s sublevel, these electrons are not identical; they differ in the quantum property known as spin. As a simple device to illustrate this, the electrons within a suborbital are often represented as arrows pointing up or down, graphically representing opposite spin axes (↑ and ↓). Electrons are added to sublevels according to Hund’s rules which state that every orbital in a subshell is singly occupied with one electron before any one orbital is doubly occupied, and all electrons in singly occupied orbitals have the same spin. When a subshell is doubly occupied, the electrons have opposite spins. For example, carbon has a filled 1s sublevel, a filled 2s sublevel and two electrons in the 2p sublevel (2p2). We could therefore show the electrons of carbon as:
The electron configuration for fluorine is 1s2 2s2 2p5, so we could show the electrons in fluorine as:
This sequence continues nicely until the third period; it turns out the 3d orbitals are slightly higher in energy than the 4s orbital, therefore the 4s fills with two electrons, and then the next 10 electrons are placed in the 3d orbital. This is a general trend in the periodic table, and the order of filling can be easily predicted by the scheme shown in Figure 1.11. In this scheme, you simply follow the arrows on the diagonal to determine the next orbital to fill.
One of the shortcuts that is often used when writing electron configuration is to show “core” electrons simply as the inert gas from the preceding period. For example, fluorine is in the second period (n = 2). That means that the orbitals associated with the first period are already filled, just like they are in the inert gas, helium (He). Therefore, instead of writing the configuration for fluorine as we did above, we can replace the 1s2 with the “helium core”, or:
Calcium is in the fourth period and in Group 2A. That means that the first three quantum levels are filled (n = 1, 2 and 3) just like they are in argon. Therefore, the electron configuration for calcium can be written as:
Note that in this example, the 3d orbitals are shown as next in line to receive electrons. In Figure 1.12, aster the 4s sublevel fills, 3d is next, followed by 4p, etc.
Exercise 1.5 Electron Configurations
- a. Write the complete electron configurations for the elements beryllium and carbon.
- b. Identify the elements corresponding to the following electron configurations:
1s2 2s1 and 1s2 2s2 2p6.
Study Points
edit- Matter is defined as any substance that has mass. Matter is composed of atoms. that are constructed primarily from neutrons, protons and electrons. Neutrons have no charge, protons, carry a positive charge, and electrons, have a negative charge.
- The mass of atoms and subatomic particles is measured using atomic mass units (abbreviated amu); protons and neutrons have a mass of one amu, and the mass of an electron is negligible.
- The neutron and the proton are in the center of the atom in the nucleus. Virtually all of the mass of the atom resides in the nucleus. Electrons are placed in a diffuse cloud surrounding the nucleus.
- The electron cloud carries a net negative charge and in a neutral atom there are always as many electrons in this cloud as there are protons in the nucleus.
- The identity of an atom is defined by the number of protons in its nucleus; each unique type of atom is called an element. Elements with the same number of protons, but differing numbers of neutrons in their nucleus are called isotopes. The atomic mass of an element is the weighted average of the masses each of these isotopes.
- Each element is referred to using its chemical symbol, which is an abbreviation of its name (many symbols are based on Latin or Greek names).
- The atomic symbol for an element consists of the chemical symbol with the atomic number for the element as a subscript, preceding the chemical symbol, and directly above this, a superscript showing the mass number for the particular isotope of the element.
- The average atomic mass for an element can be calculated as the sum of the fraction of each isotope within the natural abundance, multiplied by the mass number of that isotope; or, average atomic mass = f1M1 + f2M2 + f3M3 …
- The number of protons in the nucleus of an element is called the atomic number of that element. Elements are typically arranged in order of increasing atomic numbers in the periodic table. In the periodic table, horizontal rows are called periods and vertical columns are called groups.
- Typically in the sciences, very large or very small numbers are shown using scientific notation (exponential notation) where a number n is shown as the product of that number and 10, raised to some exponent x; that is, (n × 10x).
- In the SI (or metric) system, the unit for distance is the meter (m), kilogram (kg) is used for mass and second (s) for time. The volume of a substance is a derived unit based on the meter, and a cubic meter (m3) is defined as the volume of a cube that is exactly 1 meter on all edges. Typically, in the laboratory, mass is expressed in grams (g) (1/1000 of a kilogram) and the cubic centimeter (cc) is to describe volume. A cubic centimeter is a cube that is 1/100 meter on each edge. For liquids and gasses, volume is usually described using the liter, where a liter (L) is defined as 1000 cubic centimeters.
- SI base units are typically represented using the abbreviation for the unit itself, preceded by a metric prefix, where the metric prefix represents the power of 10 that the base unit is multiplied by.
- When converting between metric units, a simple algorithm involves taking a given measurement and multiplying it by a known proportion or ratio to give a result having the metric unit, or dimension, that you were trying to find.
- In a measurement in science, the last digit that is reported is estimated, and this digit is called the least significant digit; this, along with the total number of exact digits plus the estimated digit is called the number of significant figures in the measurement. When identifying the number of significant figures in a measurement, all leading zeros are excluded. Zeros that are surrounded by non-zero digits are included, and, for numbers with a decimal point, trailing zeros are also included. If a number does not have a decimal point, trailing zeros are not included. A number written in scientific notation includes all significant digits in n; (n × 10x).
- According to the quantum model of the atom, electrons reside in seven different quantum levels, denoted by the principal quantum number n, where n has a value of one to seven, corresponding to the seven rows in the periodic table. The first row (n = 1) can accommodate two electrons; the second row (n = 2) can accommodate eight electrons; the third row (n = 3), eighteen, up to a maximum of 2n2 for the known elements.
- Quantum theory also tells us that the electrons in a given energy level reside within sublevels (or subshells). The sublevels for any given level are identified by the letters, s, p, d and f and the quantum number for the level, written as 1s2 2s2 2p5, etc. Each of the sublevels is also associated with an orbital, where an orbital is simply a region of space where the electron is likely to be found.
- When adding electrons to sublevels, Hund’s rules state that every orbital in a subshell is singly occupied with one electron before any one orbital is doubly occupied, and all electrons in singly occupied orbitals have the same spin (shown using “up and down” arrows). Electrons are added in order of increasing energy of the sublevel, not necessarily in numeric order.
Physical and Chemical Properties of Matter
Chapter 2. The Physical and Chemical Properties of Matter
edit2.1 Pure Substances and Mixtures
editIn Chapter 1, we learned that atoms are composed of electrons, protons and neutrons and that the number of protons in the nucleus of an atom (the atomic number) defines the identity of that element. For example, an atom with six protons in its nucleus is a carbon atom; seven protons makes it nitrogen; eight protons makes it oxygen, and so on. The periodic table organizes these elements by atomic number and there are currently over 116 known elements.
Because there are clearly more than 116 different types of substances in the world around us, we can see that most substances that we encounter are not pure elements, but are composed of different elements combined together. In chemistry, we refer to these as compounds, which we define as a substance that results from the combination of two or more elements in a constant ratio. For example, water is a compound composed of two hydrogen atoms bonded to one oxygen atom. We can show the ratio of hydrogen to oxygen in this compound by using subscripts on the chemical symbols for each element. Thus, water (two hydrogens and one oxygen) can be written as H2O. This shorthand notation for water is called a chemical formula. For any compound, the chemical formula tells us the elements that are present and the ratio of the elements to each other. Later we will see that water is a member of a special sub-type of compound, called a molecular compound. In a molecule, the atoms are not only bonded together in a constant ratio, but they are bonded in a specific geometric arrangement as well (Figure 2.1). In the following chapter, we will look more closely at how elements are bonded together in compounds, but first we will examine some of the properties of chemical substances.
When we speak of a pure substance, we are speaking of something that contains only one kind of matter. This can either be one single element or one single compound, but every sample of this substance that you examine must contain exactly the same thing with a fixed, definite set of properties. If we take two or more pure substances and mix them together, we refer to this as a mixture. Mixtures can always be separated again into component pure substances,because bonding among the atoms of the constituent substances does not occur in a mixture. Whereas a compound may have very different properties from the elements that compose it, in mixtures the substances keep their individual properties. For example sodium is a soft shiny metal and chlorine is a pungent green gas. These two elements can combine to form the compound, sodium chloride (table salt) which is a white, crystalline solid having none of the properties of either sodium or chlorine. If, however, you mixed table salt with ground pepper, you would still be able to see the individual grains of each of them and, if you were patient, you could take tweezers and carefully separate them back into pure salt and pure pepper.(Figure 2.2)
Mixtures fall into two types, based on the uniformity of their composition. The first, called a heterogeneous mixture, is distinguished by the fact that different samples of the mixture may have a different composition. For example, if you open a container of mixed nuts and pull out a series of small samples and examine them, the exact ratio of peanuts-to-almonds in the samples will always be slightly different, no matter how carefully you mix them. Common examples of heterogeneous mixtures include dirt, gravel and vegetable soup.(Figure 2.3)
In a homogeneous mixture, on the other hand, any sample that you examine will have exactly the same composition as any other sample. Within chemistry, the most common type of homogeneous mixture is a solution which is one substance dissolved completely within another. Think of a solution of pure sugar dissolved in pure water (Figure 2.4). Any sample of the solution that you examine will have exactly the same ratio of sugar-to-water, which means that it is a homogeneous mixture. Even in a homogeneous mixture, the properties of the components are generally recognizable. Thus, sugar-water tastes sweet (like sugar) and is wet (like water). Unlike a compound, which has a fixed, definite ratio, in a mixture one can vary the amounts of each component. For example, when you add a little sugar to one cup of tea and a lot of sugar to another, each cup will contain a homogeneous mixture of tea and sugar but they will have a different taste. If you add so much sugar that some does not dissolve and stays on the bottom, however, the mixture is no longer homogeneous, it is heterogeneous;you could easily separate the two components.
Exercise 2.1 Distinguishing Substances & Mixtures
The States of Matter
editAs described in Section 2.1, a molecule of water is composed of two atoms of hydrogen bonded to one atom of oxygen(H2O). All water molecules are exactly the same (same ratio of elements, same geometric bonding pattern), but we encounter water in three different forms in the world around us. At low temperature, water exists as a solid (ice). As the temperature increases, water exists as a liquid, and at high temperature, as water vapor, a gas. An example in which these three states (or phases) exist simultaneously is shown in Figure 2.5. These three forms of water represent the three states of matter: solids, liquids and gases. States of matter are examples of physical properties of a substance. Other physical properties include appearance (shiny, dull, smooth, rough), odor, electrical conductivity, thermal conductivity, hardness and density, to name just a few. We will discuss density in more detail in the next section, but first let’s examine the states of matter and how they differ on an atomic level.
If ice, liquid water and water vapor all consist of identical molecules, then what accounts for the difference in their properties? So far, we have talked about molecules as if they were standing still, but in fact, they are always moving. In chemistry, we often explain the states of matter in terms of the kinetic molecular theory (KMT). The word kinetic refers to motion and the kinetic molecular theory suggests that atoms and molecules are always in motion. The energy associated with this motion is termed kinetic energy. The amount of kinetic energy that a particle has is a direct function of temperature, and it is the kinetic energy of the water molecules under different conditions that determines the different properties of the three states of water as shown in Figure 2.5.
Atoms and molecules move in different ways under different conditions because of the forces attracting them to each other, called intermolecular forces. Intermolecular forces is a general term describing the fact that all atoms, and molecules share a certain inherent attraction for each other. These attractive forces are much weaker than the bonds that hold molecules together, but in a large cluster of atoms or molecules the sum of all of these attractive forces can be quite significant.
Now, consider a group of molecules or atoms clustered together and held in place by these attractive forces. At low temperature, the molecules or atoms will remain stuck together in a lump of defined shape and structure, like water in the form of an ice cube. This is referred to as the solid phase. At the atomic level, the molecules or atoms in a solid are closely packed, and although they are still all rapidly moving, their movements are so small that they can be thought of as vibrating about a fixed position. As an analogy here, think of a handful of small magnets stuck together in a solid mass (Figure 2.6). Solids and liquids are the most tightly packed states of matter. Because of the intermolecular forces, solids have a defined shape, which is independent of the container in which they are placed. As energy is added to the system, usually in the form of heat, the individual molecules or atoms acquire enough energy to overcome some of the attractive intermolecular forces between them so that neighboring particles are free to move past or slide over one another. This state of matter is called the liquid phase. As in a solid, in a liquid, the attractive forces are strong enough to hold the molecules or atoms close together so they are not easily compressed and have a definite volume. Unlike in a solid, however, the particles will flow (slide over each other) so that they can assume the shape of their container, as shown in Figure 2.7.
Finally, if enough energy is put into the system, the individual molecules or atoms acquire enough energy to totally break all of the attractive forces between them and they are free to separate and rapidly move throughout the entire volume of their container. This is called the gas phase and atoms or molecules in the gas phase will totally fill whatever container they occupy, taking on the shape and volume of their container. Because there is so much space between the particles in a gas, a gas is highly compressible, which means that the molecules can be forced closer together to fit in a much smaller space (Figure 2.8). We are all familiar with cylinders of compressed gas, where the compressibility of gasses is exploited to allow a large amount of gas to be transported in a very small space. Figure 2.9 shows a simple graphic representation of the atomic states in solids, liquids and gasses.
Returning to our example of water, at low temperature, water exists as the solid, ice. As the solid is warmed, the water molecules acquire enough energy to overcome the strongest of the attractive forces between them and the ice melts to form liquid water. This transition from the solid phase to the liquid phase happens at a fixed temperature for each substance called the melting point. The melting point of a solid is one of the physical properties of that solid. If we remove energy from the liquid molecules they will slow down enough for the attractive forces to take hold again and a solid will form. The temperature that this happens is called the freezing point and is the same temperature as the melting point.
As more energy is put into the system, the water heats up, the molecules begin moving faster and faster until there is finally enough energy in the system to totally overcome the attractive forces. When this happens, the water molecules are free to fly away from each other, fill whatever container they are occupying and become a gas. The transition from the liquid phase to the gas phase happens at a fixed temperature for each substance and is called the boiling point. Like the melting point, the boiling point is another physical property of a liquid.
Phase transitions for a typical substance can be shown using simple diagram showing the physical states, separated by transitions for melting and boiling points. For example, if you are told that a pure substance is 15˚ C above its boiling point, you can use the diagram to plot the temperature relative to the boiling point. Because you are above the boiling point, the substance will exist in the gas phase.
Example 2.1 The Physical State of a Substance
There are, however, some exceptions to the rules for changes of state that we have just established,. For example, ice is a solid and the molecules in the interior are held together tightly by intermolecular forces. Surface molecules, however, are exposed and they have the opportunity to absorb energy from the environment (think of a patch of snow on a bright sunny day). If some of these surface molecules absorb enough energy, they can break the attractive forces that are holding them and escape as a gas (water vapor) without ever going through the liquid phase. The transition from a solid directly into a gas is called sublimation. The reverse process, a direct transition from a gas to a solid, is called deposition. Perhaps the most common example of a solid that does not melt, but only sublimes, is dry ice (solid carbon dioxide;CO2), shown in Figure 2.10. This property of dry ice is what makes it a good refrigerant for shipping perishables. It is quite cold, keeping things well frozen, but does not melt into a messy liquid as it warms during shipment.
Just like surface molecules in solids can move directly into the gas phase, surface molecules in liquids also absorb energy from the environment and move into the gas phase, even though the liquid itself is below the boiling point. This is the process of vaporization (evaporation). The reverse process, a transition from a gas to a liquid, is called condensation. Liquid substances undergo vaporization and the space above any liquid has molecules of that substance in the gas state. This is called the vapor pressure of the liquid, and vapor pressure (at a given temperature) is another of the physical properties of liquid substances.
Summarizing what we know about the different states of matter:
In a gas:
- the molecules or atoms are highly separated, making a gas highly compressible,
- attractive forces between the particles are minimal, allowing the gas to take on the shape and volume of its container.
In a liquid:
- the molecules or atoms are closely spaced, making a liquid much less compressible than a gas,
- attractive forces between the particles are intermediate, allowing the molecules or atoms to move past, or slide over one another,
- liquids have a definite volume, but will take on the shape of their container.
In a solid:
- the attractive forces are strong, keeping the atoms or molecules in relatively fixed positions,
- the neighboring atoms or molecules are close together, making the solid not compressible and giving it a definite shape that is independent of the shape and size of its container.
Exercise 2.2 States of Matter
2.3 Density, Proportionality and Dimensional Analysis
editIn the previous section, we have learned about the states of matter. The physical state of a substance at under a defined set of conditions (like temperature and pressure) is an intensive property of a substance. An intensive property is defined as a property that is inherent to the substance and is not dependent on the sample size. Density, the mass-to-volume ratio of a substance, is another example of an intensive property.(Figure 2.11)
If you picked up equal sized samples of aluminum and gold, you would immediately notice that one was much heavier than the other. The atomic mass of gold is over seven times greater than the atomic mass of aluminum, so although the two samples are the same size, the lump of gold is significantly more massive than the equally sized lump of aluminum. We can say that gold is more dense than aluminum.
Making this a quantitative measurement, one cubic centimeter of gold has a mass of 19.3 grams (remember that a cubic centimeter is the volume of a cube that is exactly one cm on each side, and it has the units of cm3[http://askthenerd.com/COL/images/2.12.html ;see Figure 2.12]. We defined density as the mass-to-volume ratio of a substance. For gold, the mass is 19.3 grams and the volume is 1 cm3. The mass-to-volume ratio of gold is , and the density (d) of gold is written as d = 19.3 g/cm3.
Returning to our block of aluminum;experimentally, one cubic centimeter of aluminum has a mass of 2.70 grams. The mass-to-volume ratio of aluminum is , and the density of aluminum is therefore 2.70 g/cm3, about 7 times less than that of gold.
Density is a physical property that can be measured for all substances, solids, liquids and gasses. For solids and liquids, density is often reported using the units of g/cm3. Densities of gasses, which are significantly lower than the densities of solids and liquids, are often given using units grams/liter (g/L, remembering from Section 1.4 that a liter is defined as 1000 cm3). Table 2.1 gives the densities of some common solids, liquids and gasses.
The definition of density that we used previously was the mass-to-volume ratio of a substance. This is also stated as “mass per unit volume”. The word per in this context implies that a mathematical relationship exists between mass and volume. In this case, the relationship is the ratio of mass-to-volume. Whenever two factors can be related by a ratio or fraction we can use unit analysis to solve problems relating those factors. For density, the ratio is mass-to-volume. If a sample of iron has a mass of 23.4 grams and a volume of 3.00 cm3, the density of iron can be calculated as:
d =
d = or, d = 7.80 g/cm3
In this calculation, our two experimental numbers are 23.4 and 3.00. Each of these numbers has three significant figures (remember, the trailing zeros in 3.00 are significant because the number has a decimal point). Our answer must therefore also be accurate to three significant figures, or 7.80.
Exercise 2.3 Density Calculations
Example 2.3 Calculating the Density of a Solid:Converting Length to find Volume.
Example 2.4 Calculating Density of a Solid:Converting Mass and Volume.
Example 2.5 Calculating the Density of a Solid:Converting Mass.
2.4 Chemical Properties, Physical Changes and Chemical Changes
editA lump of gold can be hammered into a very thin sheet of gold foil (it is the most malleable of all of the elements). Nonetheless, the gold in the foil sheet is still just elemental gold;nothing has changed except the physical appearance of the sample. The same is true if you take any solid pure substance and melt it, or convert it to a gas. The atomic or molecular structure of the substance has not changed, it simply has a different physical appearance. Changes in outward appearances that do not alter the chemical nature of the substance and make no new substance are called physical changes. Pure carbon, in the form of a briquette, can be smashed to a fine powder without changing the fact that it is still just elemental carbon (thus, this is a physical change), but if pure carbon is heated in the presence of oxygen, something else happens. The carbon slowly disappears (often in flames) and the carbon atoms now appear as a compound with oxygen with the formula CO2. Carbon dioxide is a totally different substance than either the carbon or the oxygen that we started with. For example, carbon is a black solid and carbon dioxide is a colorless gas. You know that a chemical change has occurred when the chemical composition of the material changes and a new substance is produced.(Figure 2.13)
Just like we defined a set of physical properties for substances, we can also define a set of chemical properties. Chemical properties are simply the set of chemical changes that are possible for that substance. For the element magnesium (Mg), we could say that chemical properties include:
- the reaction with oxygen to form MgO,
- the reaction with hydrochloric acid to form MgCl2 and hydrogen gas (H2),
- the reaction with solid carbon dioxide (dry ice) to form MgO and carbon.
Chemical changes can almost always be detected with one of our physical senses. Thus, when magnesium reacts with oxygen (burns in air) a bright white flame is produced, heat is evolved and the shiny metallic magnesium is converted to a crumbly white powder (MgO; (Figure 2.14a). In the reaction with hydrochloric acid (the molecule HCl dissolved in water), the solid metallic magnesium disappears, bubbles of hydrogen gas (H2) are evolved, heat is produced, and a clear solution containing MgCl2 is formed (Figure 2.14b). In the reaction with solid carbon dioxide (dry ice), a bright white flame is produced, heat is evolved and the shiny metallic magnesium is converted to a crumbly white powder and solid carbon (Figure 2.14c). In general, when you are trying to identify a chemical change, look for evidence of heat or light, the evolution of a gas, a change in color or the formation of new solid products from otherwise clear solutions.
Exercise 2.4 Chemical and Physical Changes
2.5 Conservation of Mass and Chemical Changes
editWhen substances undergo chemical changes their physical state is usually dramatically altered. Despite this dramatic change, however, no matter is lost or created. We can show this with the reaction of magnesium metal with oxygen to form magnesium oxide (Figure 2.14). Instead of burning the magnesium metal openly in the air, if you were to seal the magnesium and air together in a glass vessel, weigh it, heat it to promote reaction, and then weigh the vessel again, you would find that there was no change in total mass. The mass of the product, magnesium oxide, would exactly equal the masses of the substances that reacted (oxygen gas and magnesium metal).
This is analogous to an experiment performed by the French chemist, Lavoisier, in the 1770s in which he heated metallic tin (Sn) with air in a closed vessel. This, and other experiments of the time, provided the data that led to the law of mass conservation. Formally, the law states, there is no detectable change in the total mass of materials when they react chemically to form new materials.
Basically, what the conservation law says is that whenever a chemical change occurs, the total mass of the substances reacting must equal the total mass of the substances that are produced. Sometimes this is stated as mass is conserved or mass is neither created nor destroyed in a chemical reaction. For example, when charcoal is burned in oxygen, the mass of the (charcoal + oxygen) must equal the mass of the (carbon dioxide, water vapor and ash) that is produced. The conservation of mass is one of the fundamental principles on which modern chemistry is based.
Study Points
edit- A compound is defined as a substance that results from the combination of two or more elements in a constant ratio. In a compound such as water, we show the ratio of the elements (hydrogen and oxygen) by using subscripts on the chemical symbols for each element. Thus, water (two hydrogens and one oxygen) is written using the chemical formula H2O. In a molecule, the atoms are not only bonded together in a constant ratio, but they are also bonded in a specific geometric arrangement.
- A pure substance contains only one kind of matter;it can be a single element or a single chemical compound. Two or more pure substances mixed together constitute a mixture;you can always separate a mixture by simple physical means.
- A heterogeneous mixture is not uniform and different samples of the mixture will have a different compositions. A homogeneous mixture, is uniform and any sample that you examine will have exactly the same composition as any other sample. Within chemistry, the most common type of homogeneous mixture is a solution.
- Any pure substance, under appropriate conditions, can exist in three different states: solids, liquids and gases. States of matter are examples of physical properties of a substance. Other physical properties include appearance (shiny, dull, smooth, rough), odor, electrical conductivity, thermal conductivity, hardness and density, etc.
- Solids have both a definite shape and volume. Liquids have a definite volume, but take on the shape of their container. Gasses have neither a definite shape nor volume, and both of these are defined by the shape and volume of their container.
- The kinetic molecular theory (KMT) is generally used to explain physical states of matter. The KMT suggests that atoms and molecules are always in motion and are loosely bound to each other by attractive called intermolecular forces. In a solid, the kinetic energy (energy of motion) associated with the atoms or molecules is insufficient to break these forces and the particles are essentially fixed in place, adjacent to each other. In a liquid, there is enough kinetic energy to break some of the attractive forces, allowing the particles to “slip and slide” next to each other, but there is not enough energy to allow them to escape. In a gas, there is sufficient kinetic energy to totally overcome the forces and the particles have no interactions with each other.
- A change of state from a solid to a liquid occurs at a defined temperature (which) called the melting point (or freezing point);this temperature is a unique physical property of the substance. The transition from a liquid to a gas, likewise, occurs at the boiling point. A direct transition from a solid to a gas is called sublimation.
- An intensive property is defined as a property that is inherent to the substance and is not dependent on the sample size. Density, the ratio of mass-to-volume for a substance, is a classic example of an intensive property.
- Density is calculated by taking the mass of a sample of a substance, and dividing that by the volume of that sample. Density for solids is typically expressed using units of grams per cubic centimeter (g cm-3);liquids as grams per milliliter (g mL-1) and gasses as grams per liter (g L-1), although any mixture of mass and volume units may be used. Remember, a mL has the same volume as a cm3, and a L is simply 1000 mL.
- Physical changes are changes in outward appearances that do not alter the chemical nature of the substance and produce no new substance. When a chemical change occurs, a new substance is produced. Just like physical properties describe the appearance or intensive properties of a substance, chemical properties describe the set of chemical changes that are possible for that substance.
- The law of mass conservation (conservation of mass) simply states, that there is no detectable change in the total mass of materials when they react chemically (undergo a chemical change) to form new substances.
Supplementary Problems
editPlease follow this link for Supplementary Problems.
Chemical Bonding and Nomenclature
Chapter 3. Chemical Bonding and Nomenclature
edit3.1 Compounds, Lewis Diagrams and Ionic Bonds
editIf we take two or more atoms and bond them together chemically so that they now behave as a single substance, we have made a chemical compound. We will see that the process of bonding actually involves either the sharing, or the net transfer, of electrons from one atom to another. The two types of bonding are covalent, for the sharing of electrons between atoms, and ionic, for the net transfer of electrons between atoms. Covalent or ionic bonding will determine the type of compound that will be formed.
In Chapter 1, we used atomic theory to describe the structure of the fluorine atom. We said that neutral fluorine has nine protons in its nucleus (an atomic number of 9), nine electrons surrounding the nucleus (to make it neutral), and the most common isotope has ten neutrons in its nucleus, for a mass number of 19. Further, we said that the nine electrons exist in two energy levels; the first energy level contains two electrons and is written 1s2. The second energy level contains seven electrons, distributed as 2s2 2p5. The outermost electron level in any atom is referred to as the valence shell. For the representative elements (remember, this includes all of the elements except for the transition metals), the number of electrons in the valence shell corresponds to the Group number of the element in the periodic table. Group 1A elements will have one valence electron, Group 6A elements will have six valence electrons, and so on. Fluorine is a Group 7A element and has seven valence electrons. We can show the electron configuration for fluorine using a Lewis diagram (or electron-dot structure), named after the American chemist G. N. Lewis, who proposed the concepts of electron shells and valence electrons. In a Lewis diagram, the electrons in the valence shell are shown as small “dots” surrounding the atomic symbol for the element.Equation 1
When more than four electrons are present in the valence shell, they are shown as pairs when writing the Lewis diagram (but never more than pairs). Lewis diagrams for the atoms in the second period are shown in Figure 3.1. As you look at the dot-structures in Figure 3.1, please understand that it makes no difference where you place the electrons, or the electron pairs, around the symbol, as long as pairs are shown whenever there are four or more valence electrons.
If you examine the Lewis diagram for neon (Ne) in Figure 3.1, you will see that the valence shell is filled; that is, there are eight electrons in the valence shell. Elements in Group 8A of the periodic table are called noble gasses; they are very stable and do not routinely combine with other elements to form compounds (although today, many compounds containing noble gasses are known). Modern bonding theory tells us that this stability arises because the valence shell in the noble gasses is completely filled. When the valence shell is not full, theory suggests that atoms will transfer or share electrons with other atoms in order to achieve a filled valence shell… that is, the electron configuration of the noble gasses. Chemical bonding can then be viewed as a quest by atoms to acquire (or lose) enough electrons so that their valence shells are filled, that is, to achieve a “noble gas configuration”. This is often referred to as the “octet rule”; the desire for elements to obtain eight electrons in the valence shell (except of course for helium where the noble gas configuration is two valence electrons).
Atoms can achieve a noble gas configuration by two methods; the transfer of electrons from their valence shells to another atom, or by sharing electrons with another atom. If you examine the Lewis diagram for lithium (Li), you will see that it has only one valence electron. If lithium was to transfer this electron to another atom, it would be left with two electrons in the 1s-orbital (denoted as 1s2). This is the same electron configuration as helium (He), and so by losing this electron, lithium has achieved a noble gas configuration. Because electrons carry a negative charge, the loss of this electron leaves lithium with a single positive charge. This is the lithium cation and it is shown as Li+.Equation 2
Returning to fluorine (F), in order to achieve the 2s2 2p6 configuration of neon (Ne), fluorine needs to gain one valence electron. Because fluorine has gained one electron, it now has one negative charge. This is the fluoride anion and it is shown as F-. The transfer of electrons in order to achieve a noble gas configuration is the process known as ionic bonding, and this will be covered in more detail later in this chapter.Equation 3
Example 3.1 Drawing Lewis Diagrams
Sodium and chlorine are both third-period elements. Draw Lewis diagrams for each of these elements.
Exercise 3.1 Drawing Lewis Diagrams
Examine the solution in Example 3.1; what number of electrons would chlorine have to gain
in order to achieve a “noble gas configuration”? What would be the
charge on chlorine?
Again, examine Example 3.1; what number of electrons would Na have to
lose to obtain the noble gas configuration of Ne with eight
valence electrons? What charge would Na have?
3.2 Covalent Bonding
editA second method by which atoms can achieve a filled valence shell is by sharing valence electrons with another atom. Thus fluorine, with one unpaired valence electron, can share that electron with an unshared electron on another fluorine to form the compound, F2 in which the two shared electrons form a chemical bond holding the two fluorine atoms together (Figure 3.2). When you do this, each fluorine now has the equivalent of eight electrons in its valence shell; three unshared pairs and one pair that is shared between the two atoms. Note that when you are counting electrons, the electrons that are shared in the covalent bond are counted for each atom, individually. A chemical bond formed by sharing electrons between atoms is called a covalent bond. When two or more atoms are bonded together utilizing covalent bonds, the compound is referred to as a molecule.
There is a simple method, given below, that we can use to construct Lewis diagrams for diatomic and for polyatomic molecules:
Begin by adding up all of the valence electrons in the molecule. For F2, each fluorine has seven, giving a total of 14 valence electrons.
Next, draw your central atom. For a diatomic molecule like F2, both atoms are the same, but if several different atoms are present, the central atom will be to the left (or lower) in the periodic table.
Next, draw the other atoms around the central atom, placing two electrons between the atoms to form a covalent bond.
Distribute the remaining valence electrons, as pairs, around each of the outer atoms, so that they all are surrounded by eight electrons.
Place any remaining electrons on the central atom.
If the central atom is not surrounded by an octet of electrons, construct multiple bonds with the outer atoms until all atoms have a complete octet.
If there are an odd number of valence electrons in the molecule, leave the remaining single electron on the central atom.
Let’s apply these rules for the Lewis diagram for chlorine gas, Cl2. There are 14 valence electrons in the molecule. Both atoms are the same, so we draw them next to each other and place two electrons between them to form the covalent bond. Of the twelve remain electrons, we now place six around one chlorine (to give an octet) and then place the other six around the other chlorine (our central atom). Checking, we see that each atom is surrounded by an octet of valence electrons, and so our structure is complete Figure 3.3
All of the Group 7A elements (the halogens), have valence shells with seven electrons and all of the common halogens exist in nature as diatomic molecules; fluorine, F2; chlorine, Cl2; bromine, Br2 and iodine I2 (astatine, the halogen in the sixth period, is a short-lived radioactive element and its chemical properties are poorly understood). Nitrogen and oxygen, Group 5A and 6A elements, respectively, also exists in nature as diatomic molecules (N2 and O2). Let’s consider oxygen; oxygen has six valence electrons (a Group 6A element). Following the logic that we used for chlorine, we draw the two atoms and place one pair of electrons between them, leaving 10 valence electrons. We place three pairs on one oxygen atom, and the remaining two pairs on the second (our central atom). Because we only have six valence electrons surrounding the second oxygen atom, we must move one pair from the other oxygen and form a second covalent bond (a double bond) between the two atoms. Doing this, each atom now has an octet of valence electrons. Figure 3.4
Nitrogen has five valence electrons. Sharing one on each atom gives the first intermediate where each nitrogen is surrounded by six electrons (not enough!). Sharing another pair, each nitrogen is surrounded by seven electrons, and finally, sharing the third, we get a structure where each nitrogen is surrounded by eight electrons; a noble gas configuration (or the “octet rule”). Nitrogen is a very stable molecule and relatively unreactive, being held together by a strong triple covalent bond. Figure 3.5
As we have constructed Lewis diagrams, thus far, we have strived to achieve an octet of electrons around every element. In nature, however, there are many exceptions to the “octet rule”. Elements in the first row of the periodic table (hydrogen and helium) can only accommodate two valence electrons. Elements below the second row in the periodic table can accommodate, 10, 12 or even 14 valence electrons (we will see an example of this in the next section). Finally, in many cases molecules exist with single unpaired electrons. A classic example of this is oxygen gas (O2). We have previously drawn the Lewis diagram for oxygen with an oxygen-oxygen double bond. Physical measurements on oxygen, however, suggest that this picture of bonding is not quite accurate. The magnetic properties of oxygen, O2, are most consistent with a structure having two unpaired electrons in the configuration shown in Figure 3.6.
In this Lewis diagram, each oxygen atom is surrounded by seven electrons (not eight). This electronic configuration may explain why oxygen is such a reactive molecule (reacting with iron, for example, to form rust); the unpaired electrons on the oxygen molecule are readily available to interact with electrons on other elements to form new chemical compounds.
Another notable exception to the “octet rule” is the molecule NO (nitrogen monoxide). Combining one nitrogen (Group 5A) with one oxygen (Group 6A) gives a molecule with eleven valence electrons. There is no way to arrange eleven electrons without leaving one electron unpaired. Nitric oxide is an extremely reactive molecule (by virtue of its unshared electron) and has been found to play a central role is biochemistry as a reactive, short-lived molecule involved in cellular communication.Figure 3.7
As useful as Lewis diagrams can be, chemists tire of drawing little dots and, for a shorthand representation of a covalent bond, a short line (a line-bond) is often drawn between the two elements. Whenever you see atoms connected by a line-bond, you are expected to understand that this represents two shared electrons in a covalent bond. Further, the unshared pairs of electrons on the bonded atoms are sometimes shown, and sometimes they are omitted (see Figure 3.8). If unshared pairs ore omitted, the chemist reading the structure is assumed to understand that they are present.Figure 3.8
3.3 Lewis Representation of Ionic Compounds
editAs mentioned in Section 3.1, elements can also transfer electrons to another element in order to achieve the noble gas configuration. Consider sodium. Sodium (Na) is in Group 3A. Its first energy level is completely filled (1s2 ), the second energy level is also filled (2s2 2p6) and there is a single electron in the third energy level (3s1). Energetically, the easiest way for sodium to achieve an octet of valence electrons is by transferring its valence electron to an acceptor atom. This will leave the sodium atom with the same electron configuration as neon (1s22s2 2p6), and will satisfy the “octet rule”. Because sodium loses one electron (with its negative charge) the sodium atom must now have a positive charge. Atoms, or covalently bound groups of atoms with a positive charge are called cations, and the sodium cation is written as Na+. Figure 3.9
If the acceptor atom in the example above was chlorine, the third valence shell would now be filled, matching the electron configuration of argon. Because the chlorine atom has accepted an electron, with its negative charge, the chlorine atom must now have a negative charge. Atoms, or covalently bound groups of atoms with a negative charge are called anions, and the chlorine anion is written as Cl-. Although electron transfer has occurred between the two atoms in this example, there is no direct bond holding the sodium cation and the chlorine anion together, other than the simple electrostatic attraction between the two charged atoms. This is the real difference between ionic and covalently bound atoms; covalent molecules are held together in a specific geometry which is dictated by the electrons that they share. Ionic compounds are held together by simple electrostatic attraction and, unless these atoms are present in organized crystals, there is no defined geometric order to this attraction. Ionic compounds are often referred to as salts. Some simple examples of ionization to form ionic salts are shown in Figure 3.10. Line-bond shorthand is used in Table 3.1 to show a series of common hydrogen-containing compounds and ions formed from second-row elements.
Example 3.2 Drawing Lewis Diagrams for Simple Covalent Molecules
Hydrogen and oxygen react to form water, H2O. Draw a Lewis diagram for water
using the line-bond shorthand.
Exercise 3.2 Drawing Lewis Diagrams for Simple Covalent Molecules
Draw the Lewis diagram for the molecules, hydrogen chloride, BrCl, and hydrogen cyanide (HCN).
3.4 Identifying Molecular and Ionic Compounds
editThe tendency for two or more elements to combine and form a molecule that is stabilized by covalent bonds (a molecular compound) can be predicted simply by the location of the various elements on the periodic table. In Chapter 1, we divided the elements in the periodic table into (seemingly) arbitrary groupings; the metals, the non-metals, the semi-metals, and so on (See Figure 3.11). These groupings are not arbitrary, but are largely based on physical properties and on the tendency of the various elements to bond with other elements by forming either an ionic or a covalent bond. As a general rule of thumb, compounds that involve a metal binding with either a non-metal or a semi-metal will display ionic bonding. Compounds that are composed of only non-metals or semi-metals with non-metals will display covalent bonding and will be classified as molecular compounds. Thus, the compound formed from sodium and chlorine will be ionic (a metal and a non-metal). Nitrogen monoxide (NO) will be a covalently bound molecule (two non-metals), silicon dioxide (SiO2) will be a covalently bound molecule (a semi-metal and a non-metal) and MgCl2 will be ionic (a metal and a non-metal). Later in this chapter we will see that many covalent compounds have bonds that are highly polarized with greater electron density around one atom than the other. These compounds are often described as having “ionic character” and these types of covalent bonds can often be readily broken to form sets of ions.
Example 3.3 Identifying Molecular Compounds
Determine whether each of the following compounds is likely to exist as a molecule, or as an ionic compound:
a. Hydrogen fluoride; HF.
b. Silicon tetrachloride; SiCl4
c. Elemental sulfur as S8
d. Disodium dioxide; Na2O.
Exercise 3.3 Identifying Molecular Compounds
Determine whether each of the following compounds is likely to exist as a molecule, or as an ionic compound:
a. PF3
b. Be3N2
c. AlP
d. CBr4
3.5 Polyatomic Ions
editThe compound NaOH has wide industrial use and is the active ingredient in drain cleaners. Based on the discussion in the previous section, we would expect NaOH to be an ionic compound because it contains sodium, a Group 1A metal. Hydrogen and oxygen, however, are nonmetals, and we would expect these to bond together covalently. This compound, called sodium hydroxide, is an example of an ionic compound formed between a metal ion (sodium) and a polyatomic ion (HO–). Charged groups of atoms, like HO–, that are bonded together covalently are called polyatomic ions. Within an ionic compound a polyatomic behaves as a single unit forming salts with other cations or anions.
Using the rules described in Section 3.2, we can draw a Lewis diagram for HO–. Oxygen has six valence electrons and hydrogen has one, for a total of seven. The central atom in our structure will be hydrogen (it is to the left of oxygen in the periodic table). Next, because this is a polyatomic ion with a single negative charge, we add the extra electron to the central atom, pair the electrons and then draw the two atoms bonded together. Next, the six remaining electrons are distributed around the oxygen to form an octet. Finally, the polyatomic ion is enclosed in brackets with the charge as a superscript to show that the ion behaves as a single unit.
Polyatomic ions are very common in chemistry and formulas and charges for common polyatomic ions are collected in Table 3.2. It is essential that you memorize these and be able to correlate the name, the composition and the charge for each of them, as they will be discussed freely throughout the remainder of the course and you will be expected to know these in General Chemistry.
Example 3.4 Lewis Diagrams for Polyatomic Ions
Construct a Lewis diagram for the polyatomic ion CO32–.
Solution: Oxygen has six valence electrons and carbon has four; therefore in CO32– there will be a total of 22 valence electrons, plus two additional electrons from the 2- charge. The central atom in our structure will be carbon (it is to the left of oxygen in the periodic table). Next, we draw the carbon (our central atom) with its’ four electrons and add the additional two electrons from the charge. The three oxygens are placed around the carbon and the electrons are arranged to form the three covalent bonds. Next, the 18 remaining electrons are distributed around the oxygens so that they all have a full octet. The carbon, however, is only surrounded by six electrons. To remedy this, we move one electron pair in to form a double bond to one of the oxygen atoms. Finally, the polyatomic ion is enclosed in brackets with the charge as a superscript.
The structure for this ion can also be drawn using line-bond shorthand, as shown below:
We need to understand that the process of placing electrons into a particular bond in a compound is an artificial aspect of building Lewis diagrams. In fact, the electrons are added to the polyatomic ion, but it is impossible to know exactly where they went.
Exercise 3.4 Drawing Lewis Diagrams for Polyatomic Ions.
Draw Lewis diagrams for NO2- and NH4+.
3.6 Resonance
editIn Example 3.3, we constructed a Lewis diagram for the carbonate anion. Our final structure showed two carbon-oxygen single bonds and one carbon-oxygen double bond. The structure that we drew is shown below, along with two other possible representations for the carbonate anion. These structures differ only in the position of the carbon-oxygen double bond.
So which of these is correct? Actually, they all are! These are all “proper” Lewis diagrams for a covalent structure having constant geometry, and the diagrams differ only in the manner that we have arbitrarily arranged the electrons. These Lewis diagrams are called resonance forms. For the carbonate anion, there are three equivalent resonance forms that can be drawn. It is important to note that the electrons are not “hopping” between the atoms, but that the electrons are spread evenly between the carbon and all three oxygens and that each carbon-oxygen bond has a bond-order of 1.33 (one and one-third covalent bonds). A structure such as this is called the resonance hybrid (Figure 3.14), and although it most clearly represents the actual bonding in the compound, it is often difficult to understand the nature of the bonding when structures are represented as resonance hybrids. A full discussion of resonance is beyond the scope of an introductory text and, for structures such as the carbonate anion, we will accept any of the proper resonance forms shown above.
3.7 Electronegativity and the Polar Covalent Bond
editIf we were to construct a Lewis diagram for molecular hydrogen (H2), we would pair the single valence electrons on each atom to make a single covalent bond. Each hydrogen would now have two electrons in its valence shell, identical to helium. The mathematical equations chemists use to describe covalent bonding can be solved to predict the regions of space surrounding the molecule in which these electrons are likely to be found. A particularly useful application of these calculations generates a molecular surface that is color coded to show electron density surrounding the molecule. This type of molecular surface is called an electrostatic potential map, and the calculated map for the hydrogen molecule is shown in Figure 3.15.
When this type of calculation is done for molecules consisting of two (or more) different atoms, the results can be strikingly different. Consider the molecule HF. Hydrogen, with one valance electron, can share that electron with fluorine (with seven valence electrons) to form a single covalent bond. A ball-and-stick model of HF is shown in Figure 3.16, along with the electrostatic potential map for the HF molecule.
In this electrostatic potential map, blue is used to indicate low electron density (a relative positive charge) and red indicates high electron density (a relative negative charge); the colors light blue, green, yellow and orange indicate the increasing charge gradient. The molecule HF is clearly very polar, meaning that a significant difference in electron density exists across the length of the molecule. The electrostatic potential map for HF contrasts significantly with that for H2, where the charge was quite symmetrical (a uniform green color). Hydrogen fluoride (HF) can be described as a very polar molecule, while hydrogen (H2) is nonpolar.
The origin of the polarization of the HF covalent bond has to do with electronegativity, an inherent property of all atoms. Within the periodic table, there is a trend for atoms to attract electrons towards themselves when they are bonded to another atom (as in HF). Atoms that tend to strongly attract electrons have a high electronegativity, relative to atoms that have a relatively low tendency to attract electrons towards themselves. The modern electronegativity scale was devised by Linus Pauling in 1932 and, in the Pauling scale, atoms in the periodic table vary in electronegativity from a low of 0.8 for cesium to a maximum of 4.0 for fluorine. A periodic table, modified to show electronegativity trends is shown in Figure 3.17.
Figure 3.17 A periodic table, modified to show the trend in electronegativity, increasing from francium (0.7) to fluorine (4.0).
In the molecule HF, the electronegativity of the hydrogen is 2.2 and fluorine is 4.0. This difference leads to the profound polarization of the HF covalent bond which is apparent in the electrostatic potential map.
Polarizations of covalent bonds also occur in more complex molecules. In water, the oxygen has an electronegativity of 3.5; hydrogen is 2.2. Because of this, each of the H-O bonds is polarized with greater electron density towards the oxygen. Within the molecule, H2O, the effect of this polarization becomes apparent in the electrostatic potential map, as shown in Figure 3.18. The end of the molecule with the oxygen has a high electron density and the hydrogen ends are electron deficient. We will see in later chapters that the polarization of water, caused by the difference in electronegativities, gives water the special properties that allows it to dissolve ionic compounds, and basically support life as we know it. Within organic chemistry (the study of carbon-containing molecular compounds), you will appreciate that the relative reactivity of organic molecules with each other is largely dependent on the polarization of covalent bonds in these molecules.
3.8 Exceptions to the Octet Rule
editReturning briefly to classical Lewis diagrams. Consider the diagram shown below for the molecule SF4. In constructing this diagram, six valence electrons are placed around the sulfur and seven valence electrons are placed around each fluorine. As we attempt to pair these to form covalent bonds, we note that there are “too many” electrons on the sulfur! We clearly cannot form a covalent bond using three electrons, so we split one pair, move the single electrons into bonding position and form bonds with the remaining two fluorines. The “extra pair” of electrons just sits there on the sulfur and does not participate directly in the bonding.
This is an example of valence expansion. In general, elements below the second period in the periodic table (S, Se, Te, etc.) will commonly have 10 – 12 electrons in their valence shells. As in SF4, these electrons are not directly involved in the formation of covalent bonds, but they affect the overall reactivity of the particular molecule.
Examples of compounds that exhibit valence expansion from Groups 4A – 8 are shown in Table 3.3. In general, all molecular compounds containing elements that appear below the second row in the periodic table are capable of valence expansion and you need to be very careful when you are drawing Lewis diagrams for these compounds. As we saw in Section 3.1 for the molecule nitrogen oxide (NO), stable molecules also exist in which atoms are not surrounded by an octet of electrons. Another example of this is the molecule BF3, which is shown in the following example.
Example 3.5 Lewis Diagrams for BF3
Construct a Lewis diagram for the molecule BF3.
Solution: Boron has three valence electrons and fluorine has seven. The central atom in our structure will be boron (it is to the left of fluorine in the periodic table). Next, we draw the boron (our central atom) with its’ three electrons and place the three fluorines around the boron with the electrons arranged to form the three covalent bonds. Each of the fluorines have a full octet. The boron, however, is only surrounded by six electrons. Because of this, the boron in BF3 is a powerful electron acceptor and forms strong complexes with electrons from other compounds. In Chapter 8 we will see that this property is called Lewis acidity and BF3 is a very powerful Lewis acid.
3.9 Common Valence States and Ionic Compounds
editIn an ionic compound the total number of charges on the cations must equal the total number of charges on the anions; that is, the compound must be neutral. In Section 3.2 we described how a sodium atom can donate an electron to another atom in order to form an ion with a full octet of electrons in its outermost electron shell (the same electron configuration as Ne). The charge on the sodium atom, when this happens, is now 1+, because it has eleven protons in its nucleus, but is only surrounded by 10 electrons. Lithium, likewise, can lose one electron to form Li1+ and be left with the same electron configuration as He. In fact, all of the Group 1A metals can lose a single electron to form 1+ ions. Elements in Group 2A can each lose two electrons to form 2+ ions and achieve a noble gas configuration. In fact, the group that a main-group element is associated with in the periodic table will dictate the valence (or charge) of its corresponding ion. Metals in Groups 1A, 2A and 3A will form ions with 1+, 2+ and 3+ charges, respectively.
Main-group nonmetals can easily achieve an octet of valence electrons by accepting electrons from other elements. Thus Group 5A elements can accept three electrons to form 3- ions, Group 6A elements accept two electrons to form 2- ions and Group 7A elements (the halogens) accept one electron to form 1- ions. For example, oxygen (Group 6A) needs to accept two electrons to achieve the electron configuration of neon. This gives oxygen a total of 10 electrons, but it only has eight protons in its nucleus (its atomic number is 8), therefore, the oxygen ion has a net charge of 2- (O2-).
To write a formula for an ionic compound composed of main group elements (or containing polyatomic ions) you need to adjust the ratio of anions and cations so that the resulting molecule is electrically neutral. For example, consider an ionic compound containing sodium and chlorine. Lithium is a Group 1A element and will form a 1+ ion; fluorine is a Group 7A element and will form a 1- ion. Neutrality is achieved when one lithium is paired with one fluorine, or LiF. For a compound composed of calcium and chlorine, the Group 2A calcium will form a 2+ ion while chlorine forms a 1- ion. To achieve neutrality, there must be two chlorines for every calcium, and the formula must be as CaCl2. Aluminum (Group 3A) will form a 3+ ion. If this was paired with oxygen (Group 6A) which forms a 2- ion neutrality would only be achieved if two Al3+ ions (for a total of six positive charges) were paired with three O2- ions (a total of six negative charges).
Consider a compound consisting of sodium and the polyatomic ion sulfate (SO42-). Sodium (Group 1A) yields a 1+ cation and so there must be two sodiums in the compound for every sulfate (which has a 2- charge), or Na2SO4. For a compound containing calcium (Group 2A) and nitrate (NO3-), two nitrate anions must be present for every calcium 2+ cation. In a compound containing multiple copies of a polyatomic ion, the entire ion is enclosed in parenthesis with a subscript to indicate the number of units. Thus the compound from calcium and nitrate would be written as Ca(NO3)2.
3.10 Nomenclature of Ionic Compounds
editThe simplest ionic compounds consist of a single type of cation associated with a single type of anion. Nomenclature for these compounds is trivial; the cation is named first, followed by the anion. If the anion is a single element, the suffix ide is added to the root name of the element. A set of common anions from Figure 3.19 is shown in Table 3.4.
When you are constructing names for ionic compounds, you do not use “multipliers” to indicate how many cations or anions are present in the compound. For example NaI is named sodium iodide; Na2S is named sodium sulfide; CaCl2 is named calcium chloride. The chemist reading the name is assumed to have sufficient knowledge to pair the elements properly based on their common valence states. There are exceptions to this simple nomenclature, however. Many transition metals exist as more than one type of cation. Thus, iron exists as Fe2+ and Fe3+ cations (they are referred to as “oxidation states”, and will be covered in detail in Chapter 5). When you are naming an ionic compound containing iron, it is necessary to indicate which oxidation state the metal has. For metals, the oxidation state is the same as the charge. Thus Fe2+ in a compound with chloride would have a formula FeCl2 and would be named iron (II) chloride, with the oxidation state (the charge on the iron) appearing as a Roman numeral in parenthesis after the cation. The cation Fe3+ paired with oxygen would have the formula Fe2O3 and would have the name iron (III) oxide. Some common transition metals with variable oxidation states are shown in Table 3.5.
The procedure for naming ionic compounds contain polyatomic ions is identical to that described above for simple ions. Thus, CaCO3 is named calcium carbonate; Na2SO4 is named sodium sulfate; (NH4)2HPO4 (a compound with two polyatomic ions) is named ammonium hydrogen phosphate; and Pb2+ paired with SO42-, PbSO4 is named lead (II) sulfate.
Example 3.6 Nomenclature of Ionic Compounds
Write a correct chemical formula for each of the following ionic compounds:
a. Calcium bromide b. Aluminum oxide
c. Copper (II) chloride d. Iron (III) oxide
Write a proper chemical name for each of the following ionic compounds:
e. Li2S f. CaO
g. NiCl2 h. FeO
Solutions:
a. Calcium is 2+, bromide is 1-; CaBr2.
b. Aluminum is 3+, oxide is 2-; Al2O3.
c. From the oxidation state that is given, copper is 2+, chloride is 1-; CuCl2.
d. From the oxidation state, iron is 3+, oxide is 2-; Fe2O3.
e. We don’t use multipliers, so this is simply lithium sulfide.
f. This is simply calcium oxide.
g. We don’t have to specify an oxidation state for nickel, so this is nickel chloride.
h. We must specify that iron is 2+ in this compound; iron (II) oxide.
Exercise 3.6 Nomenclature of Ionic Compounds
Write a correct chemical formula for each of the following ionic compounds:
a. Sodium phosphide
b. Iron (II) nitrite
c. Calcium hydrogen phosphate
d. Chromium (III) oxide
Write a proper chemical name for each of the following ionic compounds:
e. NaBr
f. CuCl2
g. Fe(NO3)3
h. (NH4)3PO4
3.11 Nomenclature of Molecular Compounds
editThe nomenclature of simple binary molecular compounds (covalently bonded compounds consisting of only two elements) is slightly more complicated than the nomenclature of ionic compounds because multipliers must be used to indicate the ratio of the elements in the molecule; the multiplier mono is only used for the second element in a compound. The multipliers that are used are shown in Table 3.6.
Further, when you are naming a molecular compound, you must also decide which element should be listed first. In general, elements appearing to the left or lower in the periodic table are listed first in the name. Once you have decided on the order, the second element is named using the element root and ide, just like in ionic compounds. Thus, for CCl4, carbon is to the left of chlorine (Group 4A vs. Group 5A), so it is listed first. There are four chlorines, so the multiplier tetra is used, and the name is carbon tetrachloride. Compounds containing hydrogen are generally an exception, and the hydrogen is listed as the first element in the name. Thus, H2S would be named using the multiplier di to indicate that there are two hydrogens and mono to indicate that there is only one sulfur, or, dihydrogen monosulfide.
For the molecule SO2; they are both Group 6A elements, but sulfur is lower in the periodic table (Row 3 vs. Row 2) so it is first in the name. There are two oxygens, so the multiplier is di and the name is sulfur dioxide.
For the molecule NO; nitrogen is to the left of oxygen (Group 6A vs. Group 5A) so it is first in the name. There is one oxygen, so the multiplier is mono and, following the rules, the name would be “nitrogen monooxide”. In this case, however, the second “o” in the name is dropped (to allow for easier pronunciation ) and the name is shortened to nitrogen monoxide. Distinguish this from another oxide of nitrogen, N2O4. Again nitrogen is first and needs the multiplier di. There are four oxygens, so the multiplier is tetra, but once again the multiplier is shortened (again, the “a” is dropped) and the name is dinitrogen tetroxide.
Example 3.7 Nomenclature of Molecular Compounds
Write a correct chemical formula for each of the following molecular compounds:
a. Chlorine monofluoride b. Dihydrogen monosulfile
c. Carbon tetrabromide d. Bromine
Example 3.7 Continued
Write a proper chemical name for each of the following molecular compounds:
e. IF f. PCl3
g. I2 h. N2F2
Solutions:
a. ClF b. H2S
c. CBr4 d. Br2
e. Iodine monofluoride f. Phosphorus trichloride
g. Iodine h. Dinitrogen difluoride
Study Points
editIn covalent bonding, electrons are shared between atoms. In ionic bonding, electrons are transferred from one atom to another. Compounds that are formed using only covalent bonds are termed molecular compounds.
The outermost electron level in any atom is referred to as the valence shell. The electron configuration of the valence shell of an atom can be shown graphically using a Lewis diagram (or electron-dot structure). The arrangement of “dots” around the chemical symbol for the element are shown singly up through four electrons, and then paired until eight electrons are present.
To form ions from individual elements, electrons are added or subtracted from the valence shell in order to completely fill the shell with eight electrons (the octet rule). The charge on the ion reflects the electrons added or removed. Representative elements through Group IIIA will lose electrons to form cations, while those in groups IVA – VIIA will gain electrons and form anions.
A covalent bond is constructed in a Lewis diagram by pairing a set of unpaired electrons from two different atoms. For the purposes of the “octet rule”, a pair of shared electrons is counted as two electrons for each atom. Multiple covalent bonds (double bonds and triple bonds) are used, if necessary, to give each bonded atom a full octet (except, of course, for helium and hydrogen). When two or more atoms are bonded together utilizing covalent bonds, the compound is referred to as a molecule.
As a rule of thumb, ionic bonds will be formed whenever the compound contains a metal. Covalent bonding will be observed in compounds containing only semimetals or nonmetals.
Groups of covalently bonded semimetals or nonmetals which are charged are called polyatomic ions. Common examples include sulfate dianion, nitrate anion, phosphate trianion, etc. These polyatomic ions are commonly paired with metals forming ionic compounds.
Many (but not all) polyatomic ions can be drawn in two or more equivalent Lewis representations. These are called resonance forms of the ion. The actual electronic structure of the ion is a combination of these Lewis structures and is called the resonance hybrid.
The electronegativity of an element is a measure of the tendency of that element to attract electrons towards itself. Electronegativities range from 0.6 to 4.0, with fluorine as the most electronegative element (a value of 4.0). The general trend in the periodic table is for electronegativity to increase from the lower left-hand corner (Fr) to the upper right-hand corner (F).
Covalent bonds formed between atoms with different electronegativity will be polarized with the greatest electron density localized around the most electronegative atom. The effect of electronegativity on electron distribution within a molecule can be shown using a computer-calculated electrostatic potential map where colors are used to represent electron density.
Elements in periods 3 – 7 can accommodate more that eight electrons in there valence shells. This phenomena is called valence shell expansion and molecules involving these elements may have 10 – 14 valence electrons in properly drawn Lewis diagrams. Exceptions to the “octet rule” also exist where the valence shell contains less than eight electrons, or contains unpaired electrons.
When naming simple, binary ionic compounds, the cation is named first using the name of the element, followed by the anion, where the suffix ide is added to the root name of the element. Multipliers are not used. For transition metals in which the metal can assume a variety of oxidation states (different positive charges), the charge of the metal ion is shown in the name using Roman numerals, in parenthesis, following the name of the element (i.e., iron (III) chloride).
When naming simple binary molecular compounds (compounds containing only covalent bonds) the least electronegative element is (generally) named first, followed by the second element, where the suffix ide is again added to the root name of the element. In molecular compounds multipliers are used to indicate the number of each atom present (mono-, di-, tri-, tetra-, etc.) with the exception that mono is not used for the first element in the compound.
Mole and Measurement
Import and Editing in Progress
Chapter 4. The Mole and Measurement in Chemistry
edit4.1 Measurement and Scale in Chemistry: The Mole Concept
editOne of the important concepts to grasp in chemistry is scale. Atoms and molecules are very small. A single atom of hydrogen has a mass of about 1.67 x 10-24 grams (that’s 0.00000000000000000000000167 grams). One cubic centimeter of water (one mL) contains about 3.3 x 1022 water molecules (that’s 33 sextillion molecules). Because chemists routinely use numbers that are both incredibly small and incredibly large, unique units of measurement have been developed to simplify working with these numbers. As we learned in Chapter 1, the atomic mass unit (amu) helps us talk about the mass of atoms on a scale appropriate to atoms (one grams is about 600 sextillion amu). In this chapter, we will introduce the concept of a mole to help us talk about numbers of atoms on a scale appropriate to the size of a sample we could work with in a laboratory (for example, in grams). The mole is defined as the number of atoms contained in exactly 12 grams of carbon-12 (the isotope ). Chemist have measured this number and it turns out to be 6.0221415 x 1023. We can think of the term mole as a number, just like the word dozen represents the number 12. We will use the mole to represent this very large number (a chemist’s dozen) and we will see that there is a special relationship between a mole of a pure substance and the mass of the substance measured in amu. Figure 4.1
The origin of the mole concept is generally attributed to the Italian chemical physicist, Amadeo Avogadro Figure 4.2. In 1811, Avogadro published an important article that drew a distinction between atoms and molecules (although these terms were not in use at the time). As part of his explanation of the behavior of gasses, he suggested that equal volumes of all gases at the same temperature and pressure contained the same number of molecules. This statement is referred to as Avogadro’s Hypothesis and today we commonly refer to the number of things in a mole, (6.0221415 x 1023) as Avogadro’s number (this is rounded to 6.02 x 1023 for most calculations). Because a mole can be thought of as a number, you can convert any number to moles by dividing that number by 6.02 x 1023. For example, at the time of this writing, the national debt of the United States is about 7.9 trillion dollars (7.9 x 1012 dollars). This could be expressed as moles of dollars as shown below:
The ratio of any number to the number of things in a mole is often referred to as a mole fraction.
Exercise 4.1 Numbers of Things in Multiple Moles and in Mole Fractions.
a. It is estimated there are 7 x 1022 stars in the universe. How many moles of stars is this?
b. It is estimated there are 7.5 x 1018 grains of sand on the earth. How many moles of sand grains is this?
c. You have 0.0555 moles of jelly donuts. What number of donuts would that be?
d. You drink a small bottle of drinking water that contains 13 moles of water.
What is the number of molecules of water you drank?
4.2 Molar Mass
editAs we described in Section 4.1, in chemistry, the term mole can be used to describe a particular number. The number of things in a mole is large, very large (6.0221415 x 1023). We are all familiar with common copy-machine paper that comes in 500 sheet reams. If you stacked up 6.02 x 1023 sheets of this paper, the pile would reach from the earth to the moon 80 billion times! The mole is a huge number, and by appreciating this, you can also gain an understanding of how small molecules and atoms really are. Figure 4.3
Chemists work simultaneously on the level of individual atoms, and on the level of samples large enough to work with in the laboratory. In order to go back and forth between these two scales, they often need to know how many atoms or molecules there are in the sample they’re working with. The concept that allows us to bridge these two scales is molar mass. Molar mass is defined as the mass in grams of one mole of a substance. The units of molar mass are grams per mole, abbreviated as .
The mass of a single isotope of any given element (the isotopic atomic mass) is a value relating the mass of that isotope to the mass of the isotope carbon-12 ( ); a carbon atom with six proton and six neutrons in its’ nucleus, surrounded by six electrons. The atomic mass of an element is the relative average of all of the naturally occurring isotopes of that element and atomic mass is the number that appears in the periodic table. We have defined a mole based on the isotopic atomic mass of carbon-12. By definition, the molar mass of carbon-12 is numerically the same, and is therefore exactly 12 grams. Generalizing this definition, the molar mass of any substance in grams per mole is numerically equal to the mass of that substance expressed in atomic mass units. For example, the atomic mass of an oxygen atom is 16.00 amu; that means the molar mass of an oxygen atom is 16.00 g/mol. Further, if you have 16.00 grams of oxygen atoms, you know from the definition of a mole that your sample contains 6.022 x 1023 oxygen atoms.
The concept of molar mass can also be applied to compounds. For a molecule (for example, nitrogen, N2) the mass of molecule is the sum of the atomic masses of the two nitrogen atoms. For nitrogen, the mass of the N2 molecule is simply (14.01 + 14.01) = 28.02 amu. This is referred to as the molecular mass and the molecular mass of any molecule is simply the sum of the atomic masses of all of the elements in that molecule. The molar mass of the N2 molecule is therefore 28.02 g/mol. For compounds that are not molecular (ionic compounds), it is improper to use the term “molecular mass” and “formula mass” is generally substituted. This is because there are no individual molecules in ionic compounds. However when talking about a mole of an ionic compound we will still use the term molar mass. Thus, the formula mass of calcium hydrogen carbonate is 117.10 amu and the molar mass of calcium hydrogen carbonate is 117.10 grams per mole (g/mol).
Example 4.1 Calculation of Molecular and Masses
Calculate the molecular mass for the sugar glucose (C6H12O6).
Exercise 4.2: Calculation of Molar Masses.
Find the molar mass of each of the following compounds:
Sand, silicon dioxide (SiO2)
Draino™, sodium hydroxide (NaOH)
Nutrasweet™, Aspartame (C14H18N2O5)
Bone phosphate, calcium phosphate Ca3(PO4)2
4.3 Mole-Mass Conversions
editAs described in the previous section, molar mass is expressed as “grams per mole”. The word per in this context implies a mathematical relationship between grams and mole. Think of this as a ratio. The fact that a per relationship, ratio, exists between grams and moles implies that you can use dimensional analysis to interconvert between the two. For example, if we wanted to know the mass of 0.50 mole of molecular hydrogen (H2) we could set up the following equations:
Equation The known molar mass of H2 is .
We are given that we have 0.50 moles of H2 and we want to find the number of grams of H2 that this represents. To perform the dimensional analysis, we arrange the known and the given so that the units cancel, leaving only the units of the item we want to find.
Example 4.2 Mole-to-Mass and Mass-to-Mole Conversions
a. Determine the mass of 0.752 mol of H2 gas.
b. How many moles of molecular hydrogen are present in 6.022 grams of H2?
c. If you have 22.414 grams of Cl2, how many moles of molecular chlorine do you have?
We can also use what is often called a per relationship (really just a ratio) to convert between number of moles and the number to things (as in 6.02 x 1023 things per mole). For example, if we wanted to know how many molecules of H2 are there in 3.42 moles of H2 gas we could set up the following equations:
The known ratio of molecules per mole is .
Equation We are given that we have 3.42 moles of H2 and we want to find the number of molecules of H2 that this represents. To perform the dimensional analysis, we arrange the known and the given so that the units cancel, leaving only the units of the item we want to find.
And finally, we can combine these two operations and use the per relationships to convert between mass and the number of atoms or molecules. For example, if we wanted to know how many molecules of H2 are there in 6.022 grams of H2 gas we could set up the following series of equations:
The known molar mass of H2 is .
The known ratio of molecules per mole is .
Equation We are given that we have 6.022 grams of H2 and we want to find the number of molecules of H2 that this represents. As always, to perform the dimensional analysis, we arrange the known ratios and the given so that the units cancel, leaving only the units of the item we want to find.
Example 4.5 Number-to-Mass Conversion
A sample of molecular chlorine is found to contain 1.0 x 1020 molecules of Cl2.
What is the mass (in grams) of this sample?
Exercise 4.3: Mole, Mass and Number Conversions.
a. How many moles of sand, silicon dioxide (SiO2), and how many molecules of sand are found in 1.00 pound (454g)
of sand?
b. You add 2.64 x 1023 molecules of sodium hydroxide (Drano™; NaOH), to your drain. How many moles are this
and how many grams?Figure 4.4
4.4 Percentage Composition
editWe are all familiar with the term percentage. We take an exam that is worth 100 points, we get 96 correct and we describe our score as 96%. We arrive at 96% by first taking our score and dividing it by the total number of points to get the fraction that we got correct. To convert the fraction to a percentage, we multiply the fraction by 100.
Applying this concept to molecules, we could describe HCl as consisting of one atom of hydrogen and one atom of chlorine. Likewise, we could use mole nomenclature and say that one mole of the molecule consists of one mole of hydrogen and one mole of chlorine, and that one mole of HCl has a mass of 36.46 grams. These descriptions, however, tell us nothing about how much of this mass is attributable to the hydrogen and how much comes from the chlorine. In order to do this, we need to speak of the percentage composition of a molecule, that is, what percent of the total mass arises from each element. These calculations are simple and involve taking the atomic mass of the element in question and dividing by the molar mass of the molecule.
For HCl, the fraction of hydrogen in HCl is given by the molar mass of hydrogen divided by the molar mass of HCl:
and the percentage of hydrogen in HCl is obtained by multiplying the fraction by 100:
Combining the steps, the percentage of chlorine in HCl can be calculated by dividing the molar mass of chlorine by the molar mass of HCl and multiplying by 100:
Example 4.6 The Percentage of an Element in a Compound
Find the percentage of fluorine in calcium fluoride (CaF2).
These types of problems can also be presented as mass calculations. For example, determine the mass of calcium in 423.6 grams of CaF2. Collecting our known, given and find values:
The known molar mass of Ca is .
The known molar mass of CaF2 is .
Equation We are given that we have a sample of CaF2 with a mass of 423.6 grams and we want to find the mass of Ca in this sample. We could find the mass of Ca if we knew the fraction of Ca in CaF2. We could then multiply this fraction by the known mass of CaF2 to obtain the mass of calcium in the sample. The fraction of Ca in CaF2 is the ratio of the two known molar masses (the percentage, before you multiply by 100). As always, to perform the dimensional analysis, we arrange the known and the given so that the units cancel, leaving only the units of the item we want to find.
Note that in this example, you want to use the fraction of Ca in CaF2, not the percentage; if you used percentage, you would have to divide your answer by 100 to get the proper number of grams of Ca in the sample.
Example 4.7 Percentage-to-Mass Conversions
A sample of CaF2 is known to contain 18.00 grams of calcium; what mass of fluorine is contained in this sample?
Exercise 4.4: Percentage Composition Calculations.
a. Carbon dioxide is a green house gas produced in combustion. What is the percentage of oxygen in CO2?
b. Barium sulfate is use when x-raying the gastrointestinal track. Determine the mass of barium in 523 grams
of BaSO4.
c. Sulfuric acid, H2SO4 is the most used chemical in industrial processes. If a sample of sulfuric acid
contained 3.67 g of hydrogen how many grams of sulfur would it contain?
4.5 Empirical and Molecular Formulas
editIn Chapter 2, we introduced the concept of a chemical compound as a substance that results from the combination of two or more atoms, in such a way that the atoms are bonded together in a constant ratio. We represented that ratio using the symbols for the atoms in the molecule, with subscripts to indicate the fixed ratios of the various atoms. The result is a molecular formula, and in Chapter 3, we used molecular formulas to devise chemical names for both molecular and ionic compounds. As we have seen in this chapter, molecular formulas can be used to directly calculate the molar mass of a compound, as shown in Figure 4.5.
Many of the methods, however, that chemists use in the laboratory to determine the composition of compounds do not give the molecular formula of the compound directly, but instead simply yield the lowest whole-number ratio of the elements in the compound. A formula such as this is called an empirical formula. For example, the molecular formula for glucose is C6H12O6, but the simplest whole-number ratio of the elements in glucose is CH2O; if you multiply each element in (CH2O) by six, you obtain the molecular formula for glucose. An empirical formula cannot be converted into a molecular formula unless you know the molar mass of the compound. For example, the empirical formula for acetic acid (the acidic component in vinegar) is identical to that for glucose (CH2O). If you analyzed these two compounds and determined only an empirical formula, you could not identify which compound you had.
Conversion of an empirical formula into a molecular formula requires that you know the molar mass of the compound in question. Knowing this, you can calculate a molecular formula based on the fact that an empirical formula can always be multiplied by an integer n to yield a molecular formula. Thus, some value of n, multiplying each element in CH2O will yield the molecular formula of acetic acid. The value of n can be determined as follows:
n x (CH2O ), where
For acetic acid, the molar mass is 60.05 g/mol, and the molar mass of the empirical formula CH2O is 30.02 g/mol. The value of the integer n for acetic acid is therefore,
; and the molecular formula is 2 x (CH</nowiki>2O), or C2H4O2.
Note that n must be an integer and that your calculation should always yield a whole number (or very close to one).
Example 4.7 Empirical and Molecular Formula Calculations
A compound is determined to have a molar mass of 58.12 g/mol and an empirical formula of C2H5;
determine the molecular formula for this compound.
Exercise 4.5: Empirical and Molecular Formula Calculations.
Benzene is an intermediate in the production of many important chemicals used in the manufacture of plastics,
drugs, dyes, detergents and insecticides. Benzene has an empirical formula of CH. It has a molar mass of
78.11 g/mol.What is the molecular formula?
Study Points
edit- The mole is defined as the number of atoms contained in exactly 12 grams of carbon-12 (the isotope ). There are 6.0221415 x 1023 particles in a mole. Remember, a mole is just a number (like dozen) and you can have a mole of anything.
- The concept of a mole is based on Avogadro’s Hypothesis (equal volumes of all gases at the same temperature and pressure contained the same number of molecules) and the number of particles in a mole (6.0221415 x 1023) is commonly referred to as Avogadro’s number (typically rounded to 6.02 x 1023 for most calculations).
- Because atomic masses, and the number of particles in a mole, are both based on the isotopic atomic mass of the isotope carbon-12, the mass of any substance expressed in atomic mass units is numerically equal to the molar mass of the substance in grams per mole. Thus, exactly 12 grams of carbon-12 contains exactly a mole of carbon atoms; likewise, 31.9988 grams of O2 contains 6.02214 x 1023 oxygen molecules (note, six significant figures), etc.
- To convert the number of moles of a substance into the mass of a substance, you simply need to multiply (moles x molar mass).
- To convert the mass of a substance into the number of moles, you simply need to divide the mass by the molar mass.
- To convert the number of moles of a substance into the number of particles of that substance, you simply need to multiply (moles x Avogadro’s number).
- The percentage composition of a compound, simply tells us what percent of the total mass arises from each element in the compound. To do the calculation, simply take the atomic mass of the element in question and divide it by the molar mass of the molecule.
- The empirical formula for a compound is the lowest whole-number ratio of the elements in that compound. For example, the molecular formula for glucose is C6H12O6, but the simplest whole-number ratio of the elements in glucose is CH2O.
Supplementary Problems
editPlease follow this link for End-of-Chapter Problems
Chemical Reactions
Chapter 5. Chemical Reactions
editIn Chapter 2, we learned that chemical changes result in the transformation of one chemical substance into a different substance having a new set of chemical and physical properties. The transformation of one substance into another is called a chemical reaction and is described using a chemical equation. In this chapter we will learn how to write and balance simple chemical equations. We will learn the basic types of chemical reactions and we will learn how to predict the products that are likely to be formed when these reactions occur. We will examine a special type of chemical reaction in which one of the products has low solubility in water and precipitates from solution. Understanding the basic rules of solubility is simple and again will allow us to predict when this type of reaction is likely to be observed. Finally, we will address the energetics of chemical reactions, laying a fundamental background for the study of reaction rates and equilibrium later in the course.
5.1 Chemical Changes and Chemical Reactions
editIn Chapter 2, we classified changes in our environment utilizing the concepts of physical and chemical changes. We said that a physical change alters the appearance of a substance without changing its molecular structure. Ice melts, water evaporates and mountains are slowly weathered into dust. All of these change the characteristics of substances, but they do not alter its basic structure. A chemical change, however, results in the transformation of one molecular substance into another. Gasoline burns, reacting with oxygen in the atmosphere, generating light, heat, and converting the carbon-based molecules into carbon dioxide gas and water vapor. When substances combine like this and undergo chemical changes, we say that a chemical reaction has occurred. Some chemical reactions are quite evident, like the burning of gasoline, and involve the production of heat or light. In other types of chemical reactions, gases are evolved, color changes occur and clear solutions become cloudy, with the ultimate formation of an insoluble substance (a precipitate). Chemical changes can also be quite obscure and their occurrence can only be detected by sophisticated chemical analysis.
Sometimes chemical changes occur spontaneously, others require the input of energy (heat) in order to occur. Chemical reactions can occur rapidly, like the explosive reaction of sodium metal in the presence of water, and others occur very slowly, like the rusting of iron or the tarnish that slowly develops on some metal surfaces exposed to air. In this chapter we will learn to represent chemical reactions using chemical equations. We will learn to balance these equations, explore types of reactions and learn to predict products from simple reactions. Central to all of this is the concept of the chemical equation.
5.2 Chemical Equations
editThe processes that occur during a chemical change can be represented using a chemical equation. In a chemical equation, the chemical formulas for the substance or substances that undergo the chemical reaction (the reactants) and the formulas for the new substance or substances that are formed (the products) are both shown, and are linked by an arrow. The arrow in a chemical equation has the properties of an “equals sign” in mathematics, and because of this, in a chemical equation, there must be the same number and types of atoms on each side of the arrow.
Reactants → Products
As an example of a chemical reaction, consider the reaction between solid carbon and oxygen gas to form carbon dioxide gas. This chemical equation for this reaction can be written as shown below. Figure 5.1
C (s) + O2 (g) → CO2 (g)
In this equation, we have used (s) and (g) to represent the physical state of the reactants at the time of the reaction (solid and gas). Other abbreviations that are often used include (l) for liquid and (aq) to indicate that the reactant or product is dissolved in aqueous solution.
As we inspect this equation we see that there is one carbon atom on each side of the arrow and that there are two oxygen atoms on each side. An equation in which there are the same number and types of atoms on both sides of the arrow is referred to as balanced. As you write chemical equations, it is important to remember those elements that naturally occur as diatomic molecules (Table 1.1). Remember that when you include these as reactants or products, remember to indicate that they are diatomic by using the subscript “2”.
Element | Chemical Formula |
---|---|
Hydrogen | H2 |
Oxygen | O2 |
Nitrogen | N2 |
Fluorine | F2 |
Chlorine | Cl2 |
Bromine | Br2 |
Iodine | I2 |
Exercise 5.1 Writing Chemical Equations.
a. Write a chemical equation for the reaction of solid iron with solid sulfur to form solid
iron(II) sulfide.
b. Write a chemical equation for the reaction of solid carbon with solid magnesium oxide to
form carbon monoxide gas and magnesium metal.
5.3 Balancing Chemical Equations
editIn another example of a chemical reaction, sodium metal reacts with chlorine gas to form solid sodium chloride. An equation describing this process is shown below.Figure 5.2
Na (s) + Cl2 (g) → NaCl (s)
Inspection of this equation, however, shows that, while there is one sodium atom on each side of the arrow, there are two chlorine atoms in the reactants and only one in the products. This equation is not balanced, and is therefore not a valid chemical equation. In order to balance this equation, we must insert coefficients (not subscripts) in front of the appropriate reactants or products so that the same number and types of atoms appear on both sides of the equation. Because chlorine is diatomic, there are two chlorines in the reactants and there must also be two chlorines in the products. In order to accomplish this, we place the coefficient “2” in front of the product, NaCl. Now we are balanced for chlorine, but there are two atoms of sodium in the products and only one shown in the reactants. To resolve this, we need to place the coefficient “2” in front of the sodium in the reactant, to give the equation shown below.
2 Na (s) + Cl2(g) → 2 NaCl (s)
In this equation, there are two sodiums in the reactants, two sodiums in the products, two chlorines in the reactants and two chlorines in the products; the equation is now balanced.
There are many different strategies that people use in order to balance chemical equations. The simplest methods, where you examine and modify coefficients in some systematic order, is generally called “balancing by inspection”. These methods are generally useful for most simple chemical equations, although mathematical algorithms are often necessary for highly complex reactions. One version of the “inspection” method that we will use in this section can be called the “odd-even” approach. Looking at the first equation that we wrote for the sodium-chlorine reaction, we note that there are an odd number of chlorines in the products and an even number of chlorines in the reactants. The first thing we did in balancing this equation was to insert the multiplier “2” in front of the product (NaCl) so that there were now an even number of chlorines on both sides of the equation. Once we did that, we simply had to balance the other element (Na) which was “odd” on both sides, and the equation was easily balanced. When you are using this approach with more complicated equations, it is often useful to begin by balancing the most complex molecule in the equation first (the one with the most atoms), and focus on the element in this compound that is present in the greatest amount.
Another example where the “odd-even” approach works well is the decomposition of hydrogen peroxide to yield water and oxygen gas, as shown below.
H2O2 (aq) → O2 (g) + H2O (l)
As we inspect this equation, we note that there are an even number of oxygen atoms in the reactants and an odd number of oxygens in the products. Specifically, water has only one oxygen (in the products) and the number of oxygen atoms in the products can be made “even” by inserting the coefficient “2” in front of H2O. Doing this (shown below) we note that we now have four hydrogens in the products and only two in the reactants.
H2O2 (aq) → O2 (g) + 2 H2O (l)
Balancing the hydrogens by inserting “2” in front of H2O2 in the reactants gives us an equation with four hydrogens on both sides on four oxygens on both sides; the equation is now balanced.
2 H2O2 (aq) → O2 (g) + 2 H2O (l)
Example 5.1 Balancing Chemical Equations.
a. When hydrogen gas reacts is combined with oxygen gas and the mixture ignited with a
spark, water is formed in a violent reaction. Write a balanced chemical equation for this reaction.
b. Lead (IV) oxide reacts with HCl to give lead (II) chloride, chlorine gas and water.
Write a balanced chemical equation for this reaction.
Exercise 5.2 Balancing Chemical Equations.
Write a balanced chemical equation for the reactions given below:
a. Solid potassium chlorate decomposes on heating to form solid KCl and oxygen gas.
b. An aqueous solution of barium chloride reacts with an aqueous solution of sodium sulfate
to form solid barium sulfate and a solution of sodium chloride.
c. Hydrogen reacts with nitrogen to give ammonia, according to the equation shown below;
balance this equation.
_____H2 (g) + _____N2 (g) → _____NH3 (g)
d. Zinc metal reacts with aqueous HCl to give hydrogen gas and zinc chloride, according
to the equation shown below; balance this equation.
_____Zn (s) + _____HCl (aq) → _____H2 (g) + _____ZnCl2 (aq)
e. Iron(III) oxide reacts with chlorine gas to give iron(III) chloride and oxygen gas,
according to the equation shown below; balance this equation.
_____Fe2O3 (s) + _____Cl2 (g) → _____FeCl3 (s) + _____O2 (g)
f. Sodium metal reacts with ammonia to give sodium amide and hydrogen gas,
according to the equation shown below; balance this equation.
_____Na (s) + _____NH3 (l) → _____H2 (g) + _____NaNH2 (s)
g. Ethane reacts with oxygen gas to give carbon dioxide and water vapor,
according to the equation shown below; balance this equation.
_____C2H6 (g) + _____O2 (g) → _____CO2 (g) + _____H2O (g)
5.4 Classifying Chemical Reactions
editThe reactions we have examined in the previous sections can be classified into a few simple types. Organizing reactions in this way is useful because it will assist us in predicting the products of unknown reactions. There are many different classifications of chemical reactions, but here we will focus on the following types: synthesis, decomposition, single replacement and double replacement. In addition, we will see that some of these reactions involve changes in the oxidation numbers of the reactants and products; these will be referred to as oxidation-reduction, or “redox” reactions.
The first type of reaction we will consider is a synthesis reaction (also called a combination reaction). In a synthesis reaction, elements or compounds undergo reaction and combine to form a single new substance. The reaction of sodium metal with chlorine gas to give sodium chloride is an example of a synthesis reaction where both reactants are elements.
2 Na (s) + Cl2 (g) → 2 NaCl (s)
In this reaction, sodium metal and chlorine gas have combined to yield (synthesize) the more complex molecule, sodium chloride. Another example of a synthesis reaction, where compounds are involved as reactants, is the reaction of the organic molecule ethene (a carbon-based molecule – covered in more depth in Chapter 14) with HBr to yield the organic molecule bromoethane.
In this example, two molecular compounds (the organic compound, ethene, and hydrogen bromide) have combined to yield (synthesize) the new molecule, bromoethane. In a similar manner, synthesis reaction can also involve elements reacting with compounds.
In decomposition reactions, a single compound will break down to form two or more new substances. The substances formed can be elements, compounds, or a mixture of both elements and compounds. Two simple examples of decomposition reactions are shown below.
Cu2S (s) → 2 Cu (s) + S (s)
CaCO3 (s) → CaO (s) + CO2 (g)
In a single-replacement reaction (also called a single-displacement reaction) an element and a compound will react so that their elements are switched. In other words, an element will typically displace another element from within a compound. As a general rule, metals will replace metals in compounds and non-metals will typically replace non-metals. An example of a single replacement reaction is shown below.
Zn (s) + CuCl2 (s) → ZnCl2 (s) + Cu (s)
In this example, elemental zinc has displaced the metal, copper, from copper(II) chloride to form zinc chloride and elemental copper. In the reactants, zinc was elemental and in the products, it is present within the compound, zinc chloride. Likewise, copper was present in a compound in the reactants and is elemental in the products.
In another example, iron metal will react with an aqueous solution of copper sulfate to give copper metal and iron(II) sulfate.
Fe (s) + CuSO4 (aq) → Cu (s) + FeSO4 (aq)
In this reaction, elemental iron replaces copper in a compound with sulfate anion and elemental copper metal is formed; metal replaces metal. The tendency of metals to replace other metals in single-replacement reactions is often referred to as an activity series. In the activity series shown below, any metal will replace any other metal which is to the right of itself in the series. Thus, iron will replace copper, as shown above, but copper metal would not replace iron from iron sulfate (iron is more active than copper). The activity series is useful in predicting whether a given single-replacement reaction will occur or not. Note that hydrogen is also included in the table, although it is not generally considered a “metal”. Within this table, metals which occur before hydrogen will react with acids to form hydrogen gas and metal salts. Copper, silver, mercury and gold are less active than hydrogen and will not liberate hydrogen from simple acids. The metals in Groups I & II of the periodic table (Li, Na, K, Rb, Cs, Ca, Sr and Ba) are so reactive that they will directly react with water to liberate hydrogen gas and form metal hydroxides. These are generally referred to as “active metals”.
The activity series is useful in predicting whether a given single-replacement reaction will occur or not. Note that hydrogen is also included in the table, although it is not generally considered a “metal”. Within this table, metals which occur before hydrogen will react with acids to form hydrogen gas and metal salts. Copper, silver, mercury and gold are less active than hydrogen and will not liberate hydrogen from simple acids. The metals in Groups I & II of the periodic table (Li, Na, K, Rb, Cs, Ca, Sr and Ba) are so reactive that they will directly react with water to liberate hydrogen gas and form metal hydroxides. These are generally referred to as “active metals”. Figure 5.3
A double-replacement reaction (or double-displacement) two ionic compounds in aqueous solution switch anions and form two new compounds. In order for a chemical reaction to occur in a double-replacement reaction, one of the new compounds that is formed must be insoluble in water, forming a solid precipitate (or a gas, to be covered in Chapter 6). If both of the new compounds which are formed are water-soluble, then no reaction has occurred. In the reactants, there were two cations and two anions in solution, and in the products there are the same two cations and two anions, in the same solution; nothing has happened. An example of a double-replacement reaction is shown below.
BaCl2 (aq) + Na2SO4 (aq) → BaSO4 (s) + 2 NaCl (aq)
In this reaction, solid barium sulfate is formed as a precipitate. This is a chemical change and this is a valid chemical reaction. In order to predict whether a double-replacement reaction will occur or not you need to understand rules for predicting solubility of ionic compounds. These rules will be covered in a later section, but are not related to the activity series discussed above. Figure 5.4
Li > | K > | Ba > | Sr > | Ca > |
Na > | Mg > | Al > | Mn > | Zn > |
Fe > | Cd > | Co > | Ni > | Sn > |
Pb > | H > | Cu > | Ag > | Hg > |
Au |
5.5 Oxidation and Reduction in Chemical Reactions
editThe oxidation number of an element represents the total number of electrons which have been removed (a positive oxidation state) or added (a negative oxidation state) to get the element into its present state. The term oxidation describes the loss of electrons by an element and an increase in oxidation state; the term reduction describes the gain of electrons and a decrease in oxidation state. Oxidation numbers for elements in compounds can be calculated using a simple set of rules, which are reproduced below in Table 5.3.
Table 5.3 Rules for Assigning Oxidation Numbers |
---|
1. The oxidation number of an element in the free state is zero. |
2. A monoatomic ion will have an oxidation number that is equal to its charge. |
3. In compounds with metals, hydrogen will be –1, otherwise it will always be +1. |
4. Oxygen, within a compound, will generally have an oxidation number of –2. |
5. Halogens will be –1, except in compounds with oxygen. |
6. Sulfur will generally be –2, except in compounds with oxygen. |
7. In a molecular compound, the most electronegative element is assigned a negative oxidation number. |
In many chemical reactions, the oxidation number of elements change. Consider the synthesis reaction shown below. In the reactants, carbon and oxygen are both elements and their oxidation numbers are zero (Rule 1). In the product, oxygen will have an oxidation number of –2 (Rule 4), therefore, carbon in CO2 must have an oxidation number of +4 in order to balance the four negative charges on the oxygens. During this reaction, the oxidation number of carbon has changed from zero in the reactants to +4 in the products and the oxidation number of oxygen has changed from zero to –2. This is an example of a redox reaction; a chemical reaction in which the oxidation numbers of elements change on going from reactants to products.
C (s) + O2 (g) → CO2 (g)
In a redox reaction, the element that “loses electrons” is said to be oxidized and will have an increase in its oxidation number. In the example above, the oxidation number of carbon increases from zero to +4; it has “lost electrons” and has been oxidized. The element that “gains electrons” in a redox reaction is said to be reduced and will have a decrease in its oxidation number. In the reaction above, the oxidation number of oxygen has decreased from zero to –2; it has “gained electrons” and has been reduced.
Example 5.2 Recognizing Redox Reactions
Arsonic and nitric acids react to form nitrogen monoxide, arsenic acid and water according
to the equation shown below. Is this an example of a redox reaction?
2 HNO3 (aq) + 3 H3AsO3 (aq) → 2 NO (g) + 3 H3AsO4 (aq) + H2O (l)
Exercise 5.3 Recognizing Redox Reactions
For each of the reactions given below, calculate the oxidation number of each of the elements
in the reactants and the products and determine if the reaction involves oxidation-reduction.
If it is a redox reaction, identify the elements that have been oxidized and reduced.
Cu2S → 2 Cu + S
Reactants: Cu _____ S _____
Products: Cu _____ S _____
Element oxidized: __________ Element Reduced __________
CaCO3 → CaO + CO2
Reactants: Ca _____ C _____ O _____
Products: Ca _____ C _____ O _____
Element oxidized: __________ Element Reduced __________
Fe2O3 + 3 H2 → 2 Fe + 3 H2O
Reactants: Fe _____ O _____ H _____
Products: Fe _____ O _____ H _____
Element oxidized: __________ Element Reduced __________
AgNO3 + NaCl → AgCl (s) + NaNO3
Reactants: Ag _____ N _____ O _____ Na _____ Cl _____
Products: Ag _____ N _____ O _____ Na _____ Cl _____
Element oxidized: __________ Element Reduced __________
5.6 Predicting Products from Chemical Reactions
editPart of the lure of chemistry is that things don’t always work out the way you expect. You plan a reaction, anticipate the products and, quite often, the results astound you! The exercise, then, is trying to figure out what was formed, why, and whether your observation leads to other useful generalizations. The first step in this process of discovery is anticipating or predicting the products which are likely to be formed in a given chemical reaction. The guidelines we describe here will accurately predict the products of most classes of simple chemical reactions. As your experience in chemistry grows, however, you will begin to appreciate the unexpected! Figure 5.5
In simple synthesis reactions involving reaction of elements, such as aluminum metal reacting with chlorine gas, the product will be a simple compound containing both elements. In this case, it is easiest to consider the common charges that the elements adopt as ions and build your product accordingly. Aluminum is a Group III element and will typically form a +3 ion. Chlorine, being Group VII, will accept one electron and form a monoanion. Putting these predictions together, the product is likely to be AlCl3. In fact, if aluminum metal and chlorine gas are allowed to react, solid AlCl3 is the predominant product.
2 Al (s) + 3 Cl2 (g) → 2 AlCl3 (s)
The synthesis reaction involving the non-metals hydrogen gas and bromine can be approached similarly. The product will contain both elements. Hydrogen, Group I, has one valence electron and will form one covalent bond. Bromine, Group VII, has seven valence electrons and will form one covalent bond. The likely product is therefore HBr, with one covalent bond between the hydrogen and the bromine.
H2 (g) + Br2 (g) < → 2 HBr (g)
For a single-replacement reaction, recall that (in general) metals will replace metals and non-metals will replace non-metals. For the reaction between lead(IV) chloride and fluorine gas, the fluorine will replace the chlorine, leading to a compound between lead and fluorine and the production of elemental chlorine. The lead can be viewed as a “spectator” in the reaction and the product is likely to be lead(IV) fluoride. The complete equation is shown below.
PbCl4 (s) + 2 F2 (g) → PbF4 (s) + 2 Cl2 (g)
In single-replacement reactions in which metals (or carbon or hydrogen) are expected to replace metals, first you should check the activity series to see if any reaction is anticipated. Remember that metals can only replace metals that are less active than themselves (to the right in the Table). If the reaction is predicted to occur, use the same general guidelines that we used above. For example, solid iron reacting with aqueous sulfuric acid (H2SO4). In this reaction the question is whether iron will displace hydrogen and form hydrogen gas. Consulting the activity series, we see that hydrogen is to the right of iron, meaning that the reaction is expected to occur. Next, we reason that iron will replace hydrogen, leading to the formation of iron sulfate, where the sulfate is the “spectator” ion. The formation of hydrogen gas requires a change in oxidation number in the hydrogen of +1 to zero. Two hydrogen atoms must therefore be reduced (a decrease in oxidation number) and the two electrons required for the reduction must come from the iron. The charge on the iron is therefore most likely to be +2 (it starts off at zero and donates two electrons to the hydrogens). The final product is therefore most likely iron(II) sulfate. The complete equation is shown below.
Fe (s) + H2SO4 (aq) → FeSO4 (aq) + H2 (g)
Decomposition reactions are the most difficult to predict, but there are some general trends that are useful. For example, most metal carbonates will decompose on heating to yield the metal oxide and carbon dioxide.
NiCO3 (s) → NiO (s) + CO2 (g)
Metal hydrogen carbonates also decompose on heating to give the metal carbonate, carbon dioxide and water.
2 NaHCO3 (s) → Na2CO3 (s) + H2O (g) + CO2 (g)
Finally, many oxygen-containing compounds will decompose on heating to yield oxygen gas and “other compounds”. Identifying these compounds and building an understanding of why and how they are formed is one of the challenges of chemistry. Some examples:
H2O2 (aq) → O2 (g) + H2O (l)
2 HgO (s) → O2 (g) + 2 Hg (l)
2 KClO3 (s) → 3 O2 (g) + 2 KCl (s)
The potential products in double-replacement reactions are simple to predict; the anions and cations simply exchange. Remember, however, that one of the products must precipitate, otherwise no chemical reaction has occurred. For the reaction between lead(II) nitrate and potassium iodide, the products are predicted to be lead(II) iodide and potassium nitrate. No redox occurs, and the product, lead iodide, precipitates from the solution as a bright yellow solid. The question of how do you predict this type of solubility trend is addressed in the next section.
Pb(NO3)2 (aq) + 2 KI(aq)< → PbI2 (s) + 2 KNO3 (aq)
5.7 Predicting Solubility Trends
editThe solubility of many simple ionic compounds can be predicted by applying the set of rules shown below.
Table 5.5 Solubility Trends for Ionic Compounds |
---|
1. Salts of the alkali metal ions and the ammonium ion, Li+, Na+, K+, and NH4+ are almost always soluble. |
2. Virtually all metal nitrates and metal acetates are soluble. |
3. Metal halides are generally soluble, except for salts of Ag+, Pb2+, Cu+ and Hg+. |
4. Metal sulfates are generally soluble, except for salts of Ba2+, Pb2+ and Ca2+. |
5. With exception of the alkali metal ions and ammonium (Rule 1), the following salts are generally insoluble: metal carbonates (CO32-), metal phosphates (PO43-) and metal chromates (CrO42-). |
6. Metal hydroxides and metal sulfides are generally insoluble, except for those covered by Rule 1 and Ca2+, Sr2+ and Ba2+. |
Applying these rules to the reaction between lead nitrate and potassium iodide, the reactants are both soluble (Rule 1 and Rule 2). In the products, potassium nitrate will be soluble (Rule 2) and lead iodide will be insoluble, based on Rule 3.
Example 5.3 Predicting Solubility
Mixing each of the following salt solutions results in the formation of a precipate. In each case, identify the insoluble salt.
a. NaCl + Pb(NO3)2
b. Fe(C2H3O2)3 + KOH
c. Ca(NO3)2 + K2SO4
d. Li2S + CuSO4
e. Co(C2H3O2)2 + LiOH
Exercise 5.4 Predicting Solubility
For each of the ionic compounds given below, determine whether or not the compound will be soluble in water, according to the trends given above.
a. AgNO3 ☐ soluble ☐ insoluble
b. MgCl2 ☐ soluble ☐ insoluble
c. Na2SO4 ☐ soluble ☐ insoluble
d. AgCl ☐ soluble ☐ insoluble
e. Ba(NO3)2 ☐ soluble ☐ insoluble
f. PbI2 ☐ soluble ☐ insoluble
g. Mg(NO3)2 ☐ soluble ☐ insoluble
h. BaSO4 ☐ soluble ☐ insoluble
i. FeCl3 ☐ soluble ☐ insoluble
j. Pb(CH3COO)2 ☐ soluble ☐ insoluble
5.8 The Energetics of Chemical Reactions
editMany of the chemical reactions that we have discussed in this chapter occur with the generation of significant amounts of light and heat. A prime example is the synthesis reaction between zinc and sulfur, described by the equation shown below.
Zn (s) + S (s) → ZnS (s)
Initially, both elements are present as fine powders. They are mixed (carefully) and the mixture is stable sitting of the laboratory bench. When the mixture is touched with a heated metal rod, however, a violent reaction occurs (the reaction is termed exothermic; producing heat) and zinc sulfide is formed as the product. The reaction is obviously favorable, so why does it need heat to start the reaction? This concept can be understood by considering a reaction coordinate diagram for a simple one-step reaction (Figure 5.8). Figure 5.8
In a reaction coordinate diagram, the y-axis corresponds to energy. The initial and final “energy wells” represent the ground-state energies of the reactants and products, and the path connecting them describes the energy changes that occur in the course of the reaction.
Looking at the reaction coordinate diagram for the zinc sulfide reaction, the reactants sit at an initial energy level that is characteristic and unique for each element or compound. Likewise, zinc sulfide sits at a lower overall energy level; that means that the conversion from the elements to the compound is favorable and that heat is liberated during the reaction. If the energy level of the products was higher than the reactants, the reaction would be unfavorable and heat would be absorbed during the reaction (the reaction is said to be endothermic; consuming heat).
Why, then, does the zinc sulfide reaction need energy input before the reaction begins? The answer lies in the curved path that connects the reactants and products in the reaction coordinate diagram. In order for the zinc-sulfur mixture to react, enough energy must be put into the system so that the energy level of the reactants equals the highest hill in the diagram. Once that point is reached, the reactants can “tumble down” the energy hill and form the more stable products (with the evolution of all of the excess energy as heat, light, etc.).
The top of the energy hill in a reaction coordinate diagram is called the transition state (or activated complex). In modern chemical theory, the transition state is the energy maximum corresponding to the processes of bond-making and bond-breaking. The energy required to go from the reactants to the transition state is the activation energy. Reactions that occur with little requirement for heat simply have a small activation energy. The magnitude of the activation energy controls the rate of a reaction and the difference in energy between the reactants and the products controls the equilibrium distribution of the products and reactants in a reversible reaction. We will return to these concepts when we address reaction rates and equilibrium later in the book.
Study Points
edit- The processes that occur during a chemical change can be represented using a chemical equation. In a chemical equation, the chemical formulas for the substance or substances that undergo the chemical reaction (the reactants) and the formulas for the new substance or substances that are formed (the products) are both shown, and are linked by an arrow. The arrow in a chemical equation has the properties of an “equals sign” in mathematics, and because of this, in a chemical equation, there must be the same number and types of atoms on each side of the arrow.
- A chemical equation in which the same number and types of atoms appear on each side of the arrow is called balanced. In order to balance an equation, insert coefficients in front of the appropriate reactants or products until there are the same number and types of atoms on both sides of the arrow.
- In a synthesis reaction, elements or compounds undergo reaction and combine to form a single new substance.
- In a decomposition' reaction, a single compound will break down to form two or more new substances. The substances formed can be elements, compounds, or a mixture of both. '
- In a single-replacement (single-displacement) reaction, an element and a compound will react so that their elements are switched. As a general rule, metals will replace metals in compounds and non-metals will typically replace non-metals.
- A double-replacement (double-displacement) reaction, two ionic compounds in aqueous solution switch anions and form two new compounds. In order for a chemical reaction to occur, one of the new compounds that is formed must be insoluble in water, forming a solid precipitate or a gas.
- The oxidation number of an element represents the total number of electrons which have been removed (a positive oxidation state) or added (a negative oxidation state) to get the element into its present state. The term oxidation describes the loss of electrons by an element and an increase in oxidation state; the term reduction describes the gain of electrons and a decrease in oxidation state.
- A chemical reaction in which oxidation numbers undergo a change is called a redox reaction. In a redox reaction, the element that “loses electrons” is said to be oxidized and will have an increase in its oxidation number. The element that “gains electrons” in a redox reaction is said to be reduced and will have a decrease in its oxidation number.
- In a simple synthesis reaction involving reaction of elements, the product will be a compound containing both elements. Write the product considering the common charges that the elements adopt as ions or the number of bonds that the elements typically form in molecules.
- In a simple single-replacement reaction, (in general) metals (including carbon and hydrogen) will tend to replace metals and that non-metals will replace non-metals.
- In a double-replacement reaction, the anions and cations simply of the two compounds simply exchange. In order for a reaction to occur, one of the products must precipitate, otherwise no chemical reaction has occurred. Changes in oxidation numbers do not occur in double-replacement reactions.
- Solubility trends can be predicted using a simple set of rules shown in Table 5.5; you should review there rules, remembering to apply them in order.
- The energy required to initiate a chemical reaction is called the activation energy. The greater the activation energy, the slower, or less favorable a reaction will be. The magnitude of the activation energy is directly linked to the rate of a chemical reaction.
Supplementary Problems
editPlease follow this link to view the set of Supplementary Problems.
Quantitative Relationships
Chapter 6. Quantitative Relationships in Chemistry
editWith the background that we have built in this course, thus far, we can now approach a more quantitative view of chemistry. While the notion of chemistry and math (together in the same room) may make you want to scream, we will see in this chapter that concepts such as chemical stoichiometry and mass balance are not overwhelming and can be approached using the same problem-solving algorithms that we have mastered in previous chapters. Once the concept of stoichiometric balance has been mastered, we will finally tackle limiting reactants. Limiting reactant problems may appear challenging, but we will see it is the same calculation that we do routinely… we simply have to do the calculations twice.
6.1 An Introduction to Stoichiometry
editStoichiometry… what a wonderful word! It sounds so complex and so chemical. In fact, it’s a fairly simple concept; stoichiometry is the relationship between the molar masses of chemical reactants and products in a given chemical reaction. In Chapter 5 we learned to balance chemical equations by inserting numerical coefficients in front of reactants or products so that there were the same number and types of atoms on each side of the equation. Thus, in the reaction between sodium metal and chlorine gas, the balanced chemical equation is: Figure 6.1
This equation tells us that two atoms of sodium react with one molecule of chlorine gas to give two sodium chlorides. The coefficients in front of the sodium and the sodium chloride are called the stoichiometric coefficients for this reaction. If we were to totally react a single molecule of chlorine gas in this reaction, this stoichiometry tells us that two atoms of sodium (atomic mass 22.99) having a total mass of 45.98 amu, would react with one molecule of chlorine gas (having a mass 70.90 amu) to give two sodium chlorides (formula mass 137.94), for a total of 275.9 amu of product. Because chemists usually don’t speak of chemical reactions in terms of individual atoms or molecules, it is much more common to describe the stoichiometry of a reaction in terms of grams of reactants and products, or more conveniently in terms of moles. Molar stoichiometry is simply the expression of the coefficients of a reaction in terms of moles of reactants and products.
6.2 An Molar Stoichiometry in Chemical Equations
editIf we were to describe the reaction of sodium metal with chlorine gas in molar terms, we would say that two moles of sodium metal combine with one mole of Cl2 to give two moles of sodium chloride. In terms of mass, two moles of sodium, having a total mass of 45.98 grams, would react with one mole of chlorine gas (a mass 70.90 grams) to give two moles of sodium chloride, for a total of 275.9 grams of product. Likewise, the molar stoichiometry for the decomposition of hydrogen peroxide (H2O2) to form oxygen and water, can be described simply as two moles of H2O2 decompose to form one mole of oxygen gas and two moles of water.
The stoichiometric coefficients for this reaction gives us the key information about the relationship between molar quantities of reactants and products, but in the real world, we will not always be working with exactly two moles of hydrogen peroxide. What if you want to know how much oxygen gas will be formed when 0.28 moles of H2O2 decompose? One way to solve this type of problem is to utilize a tool that we will call a reaction pathway. The reaction pathway is a kind of simple map of the stoichiometry of a reaction, which uses arrows to show the relationship between reactants and products. For any simple reaction, a pathway can be drawn linking the reactants and products as follows: Scheme 1
Using the given-find-ratio algorithm that we introduced back in Chapter 1, if we were given mol reactant and we wanted to find mol product, we could set up a simple equation as follows: Scheme 2
The units mol reactant cancel to give the solution in mol product. If we were given mol product and we wanted to find mol reactant, we would set up the equation as follows in order for the units to properly cancel:
This basic approach can be used to solve for any molar (mass, or gas) conversion based on a balanced chemical equation, as long as you are careful to set up the ratios so that the units cancel, giving you the desired solution with the proper units. As an example, return to the question of the decomposition of H2O2. If 0.28 moles of H2O2 decompose, according to the equation given below, how many moles of oxygen gas (O2) will be formed? Scheme 3
We set up the problem to solve for mol product; the general equation is:
The stoichiometric mole ratio is set up so that mol reactant will cancel, giving a solution in mol product. Substituting, Scheme 4
= 0.14 mol O2
Thus, the decomposition of 0.28 mol of H2O2 will produce 0.14 mol of the product, oxygen gas (O2).
Example 6.1 Using Molar Stoichiometry
a. Iron (III) oxide reacts with hydrogen gas to form elemental iron and water, according to the balanced
equation shown below. How many moles of iron will be formed from the reduction of excess iron (III)
oxide by 0.58 moles of hydrogen gas?
b. When an impure sample containing an unknown amount of Fe2O3 is reacted with
excess hydrogen gas, 0.16 moles of solid Fe are formed. How many moles of Fe2O3
were in the original sample?
Exercise 6.1 Molar Stoichiometry
Ammonia is produced industrially from nitrogen and hydrogen according to the equation:
a. If you are given 6.2 moles of nitrogen how many mole of ammonia could you produce?
b. How many moles of hydrogen would you need to fully react with 6.2 moles of nitrogen?
c. If you wished to produce 11 moles of ammonia how many moles of nitrogen would you need to start with?
6.3 Mass Calculations
editThe methods described in the previous section allow us to express reactants and products in terms of moles, but what if we wanted to know how many grams of a reactant would be required to produce a given number of grams of a certain product? This logical extension is, of course, trivial! In Chapter 4, we learned to express molar quantities in terms of the masses of reactants or products. For example, the reduction of iron (III) oxide by hydrogen gas, produces metallic iron and water. If we were to ask how many grams of elemental iron will be formed by the reduction of 1.0 grams of iron (III) oxide, we would simply use the molar stoichiometry to determine the number of moles of iron that would be produced, and then convert moles into grams using the known molar mass. For example, one gram of Fe2O3 can be converted into mol Fe2O3 by remembering that moles of a substance is equivalent to grams of that substance divided by the molar mass of that substance: Figure 6.3
Using this approach, the mass of a reactant can be inserted into our reaction pathway as the ratio of mass-to-molar mass. This is shown here for the reduction of 1.0 gram of Fe2O3. Scheme 5
Given:
Find: x mol Fe
We set up the problem to solve for mol product; the general equation is:
The stoichiometric mole ratio is set up so that mol reactant will cancel, giving a solution in mol product. Substituting,
It is often simpler to express the ratio (mass)/(molar mass) as shown below,
Doing this, and rearranging,
= 0.013 mol
That is, the reduction of 1.0 grams of Fe2O3 by excess hydrogen gas will produce 0.013 moles of elemental iron. All of these calculations are good to two significant figures based on the mass of iron (III) oxide in the original problem (1.0 grams). Note that we have two conversion factors (ratios) in this solution; one from mass to molar mass and the second, the stoichiometric mole ratio from the balanced chemical equation. Knowing that we have 0.013 moles of Fe, we could now convert that into grams by knowing that one mole of Fe has a mass of 55.85 grams; the yield would be 0.70 grams.
We could also modify our basic set-up so that we could find the number of grams of iron directly. Our modified pathway would look like this: Scheme 6
Here we have simply substituted the quantity (moles molar mass) to get mass of iron that would be produced. Again, we set up the problem to solve for mol product;
In place of mol product and mol reactant, we use the expressions for mass and molar mass, as shown in the scheme above. The stoichiometric mole ratio is set up so that mol reactant (the given) will cancel, giving a solution in mol product. Substituting,
Rearranging and canceling units,
= 0.70 g
Example 6.2 Mass Calculations in Stoichiometry
Aqueous solutions of silver nitrate and sodium chloride react in a double-replacement reaction to form a precipitate of silver chloride, according to the balanced equation shown below. Figure 6.4
If 3.06 grams of solid AgCl are recovered from the reaction mixture, what mass of AgNO3
was present in the reactants?
Example 6.3 Mass Calculations in Stoichiometry
Aluminum and chlorine gas react to form aluminum chloride according to the balanced equation shown in the Scheme below.
If 17.467 grams of chlorine gas are allowed to react with excess Al, what mass of solid aluminum chloride
will be formed?
Exercise 6.2 Molar Stoichiometry
Ammonia, NH3, is also used in cleaning solutions around the house and is produced from nitrogen
and hydrogen according to the equation: Figure 6.5
a. If you have 6.2 moles of nitrogen what mass of ammonia could you hope to produce?
b. If you have 6.2 grams of nitrogen how many grams of hydrogen would you need?
6.4 Percentage Yield
editWhen we use stoichiometric calculations to predict quantities in a reaction, our results are based on the assumption that everything happens in reality exactly as described by the chemical equation. Unfortunately, that is not always the case. When you work in the laboratory, things often go wrong. When you are weighing out reactants and transferring the materials to reaction vessels, some material will often remain on the spatula or in the weighing vessel. As you collect product, some may spill, or in a vigorous reaction, material may escape from the reaction vessel. Stoichiometric calculations will give you a theoretical yield for a reaction; the yield that you should obtain assuming that the reaction proceeds with 100% efficiency and that no material is lost in handling. The amount of material that you isolate from a given reaction is called the actual yield and it is always less than the theoretical yield. The percentage of the theoretical yield that you actually isolate is called the percentage yield.
Consider the reaction between silver nitrate and sodium chloride to form solid silver chloride. If we react 10.00 grams silver nitrate with excess sodium chloride, we would predict that we would obtain: Scheme 6.7
We set up the problem to solve for mol product; the general equation is:
For mol product and mol reactant, we use the expressions for (mass)/(molar mass), as shown in the scheme above. The stoichiometric mole ratio is set up so that mol reactant will cancel, giving a solution in mol product. Substituting,
or,
= 8.440 g
This mass, calculated from the masses of starting materials and the stoichiometry of the equation is the theoretical yield. Because the silver chloride is a precipitate from an aqueous solution, however, we must filter it, dry it, transfer it to our balance and weigh it, before we can measure how much product we obtain as our actual yield. As we filter it, a small amount of solid is likely to remain stuck to the sides of the flask. When it is dry and we transfer it to the balance, some solid will remain on the filter paper, some on the spatula, and (most likely) your lab partner will sneeze at an inopportune moment and blow some of it all over the desktop. Considering all of this, it is very unlikely that we will end up with an actual yield of 8.044 grams of solid AgCl.
Let’s assume that we have done all of these operations (including the sneeze) and when we weigh our solid AgCl, we actually obtain 7.98 grams of solid. We know that we obtain 7.98 grams of product (our actual yield) and we calculated that we should obtain 8.440 grams of product (the theoretical yield). The percentage of the theoretical yield that we obtain is called the percentage yield, and is calculated as (actual yield)/(theoretical yield) 100. In the present case:
The percentage yield of solid AgCl that we obtained in this reaction is therefore 94.5% (not bad, actually, considering your lab partner). The concept of percentage yield is generally applied to all experimental work in chemistry.
Powdered zinc and solid sulfur combine explosively to form zinc sulfide. You and your lab partner carefully
mix 0.010 mole of solid zinc powder with exactly 0.010 mole of powdered sulfur in a small
porcelain crucible. Knowing your lab partner, you allow your instructor to ignite the mixture.
The explosion forms a cloud of ZnS, scatters some all over the ground, and leaves a crusty pile of
product in the crucible. You transfer this and determine that 0.35 grams of solid product has been recovered.
Calculate the percentage yield.
The Harber process is used making ammonia from nitrogen and hydrogen according to the equation shown below. The yield of the reaction, however, is not 100%.
Suppose you end up with 6.2 moles of ammonia, but the reaction stoichiometry predicts that you should
have 170.0 grams of ammonia. What is the percent yield for this reaction?
If you started with 6.2 grams of nitrogen and you produce 6.2 grams of ammonia what would be the percent yield?
6.5 Limiting Reactants
editGloves will typically come is right- and left-handed models. In order to make a pair of gloves, you need one that is designed to fit each hand. If you had a box containing 50 left-handed gloves and another box containing 40 right-handed gloves, you could make 40 proper pairs and you would have ten left-handed gloves left over. The number of pairs of gloves that you could assemble is limited by the glove in the smallest number (the right-handed glove). The other glove in this example, the left, is present in excess. Figure 6.6
The same sort of logic applies to chemical reactions in which there are two or more reactants. In Example 6.4, we carefully weighed out 0.010 mole of solid zinc and solid sulfur in order to react them to form 0.010 mole of the product, ZnS. If instead, we had reacted 0.010 mole of Zn with 0.020 moles of sulfur, how much ZnS would have (theoretically) formed? The answer is still 0.010 mole of ZnS. What happens to the leftover sulfur? It just sits there! When the reaction is complete, there is (theoretically) 0.010 mole of ZnS mixed with the remaining 0.010 mole of sulfur. This is shown graphically in Figure 6.7; 10 atoms of Zn reacting with 20 atoms of S yield 10 molecules of ZnS with 10 atoms of S remaining.
You may have noticed that, in many of the problems in this chapter, we stated that one reactant reacted with an excess of a second reactant. In all of these cases, the theoretical yield of product is determined by the limiting reactant in the reaction, and some of the excess reactant is left over. If aluminum and chlorine gas, a diatomic gas, react to form aluminum chloride according to the equation shown below,
and there are 2.0 moles of aluminum and 14 moles of chlorine present, two moles of aluminum chloride are formed and 11 moles of chlorine gas remain in excess. Our stoichiometry is:
If three moles of chlorine gas are used in the reaction, (14 – 3) = 11 moles of chlorine must remain. When a problem is presented and one reactant is labeled as excess, the theoretical yield of product is equal to the moles of the limiting reagent, adjusted for the stoichiometry of the reaction.
Although it would be easier if reactants were routinely labeled as “limiting” or “excess”, more commonly problems are written in such a way that it is not always trivial to identify the limiting reactant. For example, if you were told that 6.0 grams of aluminum was reacted with 3.8 grams of chlorine gas and you were asked to calculate the mass of AlCl3 that would be formed, there would be no simple way to identify the limiting- and excess reactants. In a case like this what you want to do is to simply solve the problem twice. First you would calculate the number of moles of aluminum in 6.0 grams, and then calculate how many moles of AlCl3 could be formed. Next, you calculate how many moles of chlorine are present in 3.8 grams of chlorine gas and again, calculate how many moles of AlCl3 could be formed. Whichever reagent produces the smallest number of moles of product must be limiting and the other reagent must be in excess.
To work this example we can expand our standard scheme to show both reactants: Scheme 6.8
Find: x moles of AlCl3
Find: x moles of AlCl3
We set up the problem to solve for mol product for each reactant. The general equation is:
The solutions for both reactants are:
, and
Solving these equations, we see that, beginning with 6.0 grams of aluminum, 0.22 moles of AlCl3 can be formed, and that, beginning with 3.8 grams of chlorine, 0.036 moles of AlCl3 can be formed.
Keeping score, 6.0 grams of Al yields 0.22 moles of AlCl3, and 3.8 grams of chlorine gas yields 0.036 moles of AlCl3. The lowest yield comes from the chlorine gas, therefore it must be limiting and aluminum must be in excess. The reaction in the problem will therefore produce 0.036 moles of product, which is equivalent to:
Example 6.5 Limiting Reactant Problems
Lead (IV) chloride reacts with fluorine gas to give lead (IV) fluoride and Cl2.
If 0.023 moles of fluorine gas reacts with 5.3 grams of lead (IV) chloride, what mass of lead (IV)
fluoride will be formed?
Although “limiting reactant problems” may be tedious, they are not difficult. When you are faced with a limiting reactant problem, just remember, you do the simple molar yield calculations twice, one for each reactant. The reactant that yields the lowest molar quantity is your limiting reagent and the molar value you calculate determines the theoretical yield in the problem.
Exercise 6.4 Limiting Reactants
Ammonia, which is the active ingredient in “smelling salts”, is prepared from nitrogen and hydrogen according to the equation shown below.
If you mix 5.0 mol of nitrogen and 10.0 moles of hydrogen how many moles of ammonia would you produce?
Which reactant is in excess?
If you have 6.2 grams of nitrogen and you react it with 6.2 grams of hydrogen how many grams of ammonia
would you produce? Which reactant is the limiting reactant?
Study Points
edit- Stoichiometry is the relationship between the masses of chemical reactants and products in a given chemical reaction. The coefficients placed in a chemical equation in order to balance it are called the stoichiometric coefficients. Molar stoichiometry is simply the expression of the coefficients of a reaction in terms of moles of reactants and products.
- In order to find the number of moles of a product that is produced in a chemical reaction when you are given moles of reactant, simply multiply the moles of reactant by the stoichiometric ratio relating that reactant and the desired product; i.e.,
.
- In order to find the number of moles of a product that are produced in a chemical reaction when you are given mass of reactant, simply divide the mass of reactant by the molar mass (to get moles reactant) and then multiply by the stoichiometric ratio relating that reactant and the desired product; i.e.,
.
- Always remember, mass divided by molar mass equals moles;
.
- The mass or the number of moles that you calculate for a product based on reaction stoichiometry is called the theoretical yield for the reaction. The amount of material that you actually isolate from a given reaction is called the actual yield and it is always less than the theoretical yield. The ratio of the actual and theoretical yields, expressed as a percentage is called the percentage yield.
- If a reaction requires more than one reactant and if you are given the mass, or the number of moles of each reactant, you must approach the calculation as a limiting reactant problem. To solve a limiting reactant problem, simply perform the standard mass calculation for each reactant, noting the mass (or number of moles) of product formed in each calculation. The reactant that yields the smallest amount or product from these calculations is called the limiting reactant. Reactants that yield larger amounts of products in these calculations are called excess reactants. The theoretical yield in the reaction will be based solely on the calculated amount for the limiting reactant.
- If a reactant in a chemical reaction is said to be “in excess”, you assume that you have unlimited amount of the reactant, and that it will never be the limiting reactant.
Supplementary Problems
edit
Aqueous Solutions
Chapter 7. Aqueous Solutions
editWater is the most remarkable solvent! The O—H bonds in water are polarized due to the differences in electronegativity between hydrogen and oxygen. When this uneven charge distribution is coupled with the fact that water has a “bent” molecular geometry, the two covalent bond dipoles combine to form a molecular dipole (shown in the electrostatic potential map on the right. This molecular dipole allows water to surround and stabilize ions in solution, making water a powerful solvent for the dissolution of polar and ionic compounds. If we know the amount of solute that we have dissolved in a given volume of solvent, we can define the term molarity, as the number of moles of solute in each liter of solution. Finally, by combining the concept of molarity with what we have learned about simple stoichiometric calculations, we can now approach quantitative chemical calculations in solution.
7.1 Dipole Moments and the Properties of Water
editWater is an amazing solvent, and has remarkable physical and chemical properties that make it the essential ingredient to life as we know it. The special properties of water come from the fact that the elements hydrogen and oxygen have differing electronegativities. In Chapter 3 we learned that covalent bonds formed between atoms of differing electronegativity are polarized. Because electronegativity is a measure of how strongly a given atom attracts electrons to itself, the atom in the covalent bond with the highest electronegativity will tend to draw the bonding electrons towards itself, resulting in a bond that is electron-rich on one end and electron-poor on the other. Covalent bonds that are polarized are said to have a dipole, where the term dipole moment refers to the direction and magnitude of the charge separation.
Consider water. The electronegativities of hydrogen and oxygen are 2.20 and 3.44, respectively. That means that in each covalent bond, the electrons will be attracted towards the oxygen, leaving the hydrogen electron-poor. In Chapter 3, we used a calculated electrostatic potential map to visualize the electron density around molecules. The map for water is shown to the left and is colored using red to indicate a high electron density and blue to show electron-poor regions. Because electrons carry a negative charge, this also means that the red regions of the molecule are anionic (negative) and that the blue regions are cationic (positive).
7.2 Molecular Dipoles
editElectrostatic potential maps are useful because they clearly show the electron distribution around covalent bonds within molecules. They must be calculated, however, using sophisticated computer programs, and then rendered in color for visualization. Because of this, the polarization of covalent bonds is typically shown using a special arrow (a dipole arrow) to indicate the direction in which the bond is polarized. A dipole arrow is crossed at the beginning (as in a plus sign) and points in the direction of the greatest electron density. Thus for hydrogen fluoride, the electronegativities are 2.20 and 3.98 for the hydrogen and fluorine, respectively. We would predict that the H—F bond would be polarized with the greatest electron density towards the fluorine. The resulting dipole moment is shown below.
A molecule such as water, with two covalent bonds, will have two local dipoles, each oriented along the covalent bonds, as shown below. Because water is asymmetric (it has a bend structure) both of these local dipoles point in the same direction, generating a molecular dipole, in which the entire molecule has a charge imbalance, with the “oxygen end” being anionic and the “hydrogen end” being cationic. The predicted molecular dipole is also shown in the electrostatic potential map in Figure 7.3.
Molecules with local dipoles do not necessarily possess a molecular dipole. Consider the molecule boron trihydride (BH3). The BH3 molecule is planar with all three hydrogens spaced evenly surrounding the boron (trigonal planar). The electronegativities of boron and hydrogen are 2.04 and 2.20, respectively. The bonds in BH3 will therefore be somewhat polarized, with the local dipoles oriented towards the hydrogen atoms, as shown below. But because the molecule is symmetrical, the three dipole arrows cancel and, as a molecule, BH3 has no net molecular dipole.
Exercise 7.1 Drawing Molecular Dipoles
For each of the molecules shown below indicate whether a molecular dipole exists. If a dipole does exist,
use a dipole arrow to indicate the direction of the molecular dipole.
7.3 Dissolution of Ionic Compounds
editA simple ionic compound, such as sodium chloride (NaCl) consists of a sodium cation and a chloride anion. Because these are oppositely charge ions, they are strongly attracted to each other. This attraction is non-specific and the sodium cation would also be strongly attracted to any anion. When an ionic compound dissolves in water, the individual cations and anions are completely surrounded by water molecules, but these water molecules are not randomly oriented. A sodium cation in water will be surrounded by water molecules oriented so that the negative end of the molecular dipole is in contact with the sodium cation. Likewise, the waters surrounding the chloride anion are oriented so that the positive end of the molecular dipole contacts the anion (Figure 7.5). When arranged like this, the charged poles of the water molecules neutralize, and thus stabilize the charges on the ions.
The ability of water to interact with and stabilize charge particles goes well beyond the water molecules that actually touch the ion. Surrounding the inner water shell is another shell of waters that will orient themselves so that their dipoles bind to the exposed dipoles from the inner shell. This is shown in Figure 7.6 using drawing showing part of the “cluster” of water molecules surrounding the sodium cation. As the subsequent layers of water surround each other, the positive charge from the cation is dispersed or spread out over the whole group of interacting molecules. The cluster then becomes effectively neutral allowing the charged ion to exist free in solution, removed from its counter-ion (the chloride). The dynamic collection of water molecules surrounding an ion in solution is referred to as the solvation shell and it is the ability of water to solvate and stabilize ions that makes water such an important solvent, both in chemistry and in biology.
In addition to ionic compounds, water will also dissolve and stabilize most molecules that are polar, that is, if they possess a molecular dipole. An example of this is shown in Figure 7.7. The organic compound, methyl propionate, contains a highly polar carbon-oxygen double bond. The electrostatic potential map in the figure clearly shows the resulting molecular dipole and methyl propionate is quite soluble in water; 6.2 grams of methyl propionate will dissolve in 100 mL of water. The organic molecule propane, also shown in the figure, does not possess a significant molecular dipole and is only very slightly soluble in water.
7.4 Concentration and Molarity
editAs described in the previous section, sodium chloride is quite soluble in water. At 25 ˚C (about room temperature), 359 grams of sodium chloride will dissolve in one liter of water. If you were to add more sodium chloride to the solution, it would not dissolve, because a given volume of water can only dissolve, disperse and stabilize a fixed amount of solute (the stuff that dissolves). This amount is different for every compound and it depends on the structure of the particular compound and how that structure interacts with the solvation shell. When a substance is dissolved in water to the point that no more will go into solution, we say the solution is saturated. For most compounds, heating the solution will allow more of the substance to dissolve, hence it is important to note the temperature when you are speaking of the solubility of a particular compound.
If we had a saturated solution of sodium chloride at 25 ˚C, we could quote the concentration as 359 grams/L, but because we know the molar mass of sodium chloride (58.44 grams/mole), we could also express our concentration as:
In chemistry, the units of moles/L are called molarity, with the abbreviation M. Thus we could say that our saturated solution of sodium chloride was 6.14 molar, or 6.14 M.
The advantage of expressing concentrations in terms of molarity is that these solutions can now be used in chemical reactions of known stoichiometry because any volume of the solution corresponds directly to a known number of moles of a particular compound. For example, the molar mass of potassium bromide is 119.0 g/mole. If we dissolved 119.0 grams of KBr in 1.000 L of water, the concentration would be 1.000 mole/L, or 1.000 M. If we now took half o this solution (0.500 L) we know that we would also have 0.500 moles of KBr.
We can determine the concentration of a solution using the problem-solving algorithm we introduced back in Chapter 1. For example, if you wan to find the molarity of a solution containing 42.8 grams of KBr in 1.00 L of water, you would identify the given and 42.8 g, your ratio is the molar mass (119 g/mole) and you want to find molarity (or moles/L). Remembering to set the equation up so that the units of given appear in the denominator of the ratio, the number of moles is:
and, the molarity is: , or 0.360 M
When you become comfortable with the simple two-step method, you can combine steps and simply divide your given mass by the given volume to get the result directly. Thus, if you had 1.73 grams of KBr in 0.0230 L of water, your concentration would be:
We can also solve these problems backwards, that is, convert molarity into mass. For example; determine the number of grams of KBr that are present in 72.5 mL of a 1.05 M solution of KBr. Here we are given a volume of 0.0725 L and our ratio is the molarity, or (1.05 moles/L). We first solve for moles,
and then convert to mass using: .
Example 7.1 Molarity Calculations
A sample of 12.7 grams of sodium sulfate (Na2SO4) is dissolved in 672 mL of distilled water.
a. What is the molar concentration of sodium sulfate in the solution?
b. What is the concentration of sodium ion in the solution?
Exercise 7.2 Molarity Calculations
Calculate the mass of sodium chloride required to make 125.0 mL of a 0.470 M NaCl solution. If you dissolve 5.8g of NaCl in water and then dilute to a total of 100.0 mL, what will be
the molar concentration of the resulting sodium chloride solution?
7.5 Solution Stoichiometry
editAs we learned in Chapter 5, double replacement reactions involve the reaction between ionic compounds in solution and, in the course of the reaction, the ions in the two reacting compounds are “switched” (they replace each other). As an example, silver nitrate and sodium chloride react to form sodium nitrate and the insoluble compound, silver chloride.
Because these reactions occur in aqueous solution, we can use the concept of molarity to directly calculate the number of moles of products that will be formed, and hence the mass of precipitates. In the reaction shown above, if we mixed 123 mL of a 1.00 M solution of NaCl with 72.5 mL of a 2.71 M solution of AgNO3, we could calculate the moles (and hence, the mass) of AgCl that will be formed as follows:
First, we must examine the reaction stoichiometry. In this reaction, one mole of AgNO3 reacts with one mole of NaCl to give one mole of AgCl. Because our ratios are one, we don’t need to include them in the equation. Next, we need to calculate the number of moles of each reactant:
Because this is a limiting reactant problem, we need to recall that the moles of product that can be formed will equal the smaller of the number of moles of the two reactants. In this case, NaCl is limiting and AgNO3 is in excess. Because our stoichiometry is one-to-one, we will therefore form 0.123 moles of AgCl. Finally, we can convert this to mass using the molar mass of AgCl:
In a reaction where the stoichiometry is not one-to-one, you simply need to include the stoichiometric ratio in you equations. Thus, for the reaction between lead (II) nitrate and potassium iodide, two moles of potassium iodide are required for every mole of lead (II) iodide that is formed.
For example: 1.78 grams of lead (II) nitrate are dissolved in 17.0 mL of water and then mixed with 25.0 mL of 2.5 M potassium iodide solution. What mass of lead (II) iodide will be formed and what will be the final concentration of potassium nitrate in the solution? Again, we need to look at this as a limiting reactant problem and first calculate the number of moles of each reactant:
The stoichiometry of this reaction is given by the ratios , and , so the number of moles of product that would be formed from each reactant is calculated as:
Potassium iodide produces the smaller amount of PbI2 and hence, is limiting and lead (II) nitrate is in excess. The mass of lead (II) iodide that will be produced is then calculated from the number of moles and the molar mass:
To determine the concentration of potassium nitrate in the final solution, we need to note that two moles of potassium nitrate are formed for every mole of PbI2, or a stoichiometric ratio of . Our final volume is (17.0 + 25.0) = 42.0 mL, and the concentration of potassium nitrate is calculated as:
Example 7.2 Solution Stoichiometry Calculations
A sample of 12.7 grams of sodium sulfate (Na2SO4) is dissolved in 672 mL of distilled water.
a. What is the molar concentration of sodium sulfate in the solution?
b. What is the concentration of sodium ion in the solution?
Exercise 7.3 Solution Stoichiometry Calculations
How many moles of sodium sulfate must be added to an aqueous solution that contains 2.0 moles of barium
chloride in order to precipitate 0.50 moles of barium sulfate?
If 1.0 g of NaN3 reacts with 25 mL of 0.20 M NaNO3 according to the reaction shown
below, how many moles of N2(g) are produced?
7.6 Dilution of Concentrated Solutions
editIn the laboratory, a chemist will often prepare solutions of known concentration beginning with a standard stock solution. A stock solution is generally concentrated and, of course, the molar concentration of the solute must be known. To perform a reaction, a measured amount of this stock solution will be withdrawn and added to another reactant, or will be diluted into a larger volume for some other use. The calculations involved in these dilutions are trivial and simply involve calculating the number of moles transferred and dividing this by the final volume. For example, 15.0 mL of a stock solution of 1.00 M hydrochloric acid (HCl) is withdrawn and diluted into 75 mL of distilled water; what is the final concentration of hydrochloric acid?
First, the number of moles of HCl is calculated from the volume added and the concentration of the stock solution:
We have diluted this number of moles into (15.0 + 75.0) = 90.0 mL, therefore the final concentration of HCl is given by:
An even simpler way to approach these problems is to multiply the initial concentration of the stock solution by the ratio of the aliquot (the amount withdrawn from the stock solution) to the final volume, using Equation 7.1,
Eq 7.1
Using this method on the previous problem,
Note that we did not have to convert our volumes (15.0 and 90.0 mL) into L when we use this approach because the units of volume cancel in the equation. If the units that are given for the aliquot and the final volume are different, a metric conversion ratio may be required. For example, 10.0 µL of a 1.76 M solution of HNO3 (nitric acid) are diluted into 10.0 mL of distilled water; what is the final concentration of nitric acid?
In this problem, we need to convert µL and mL into a common unit. We can do this using the ratios, . We need to multiply each of our volumes by the appropriate factor to get our volumes in terms of liters, and then simply multiply by the initial concentration. Thus,
The final volume in this problem is actually (1.00 10-2 L) + (1.00 10-5 L) = 1.001 10-2 L, but because our calculation is only accurate to three significant figures, the volume of the aliquot is not significant and the final volume has been rounded.
The standard method we have used here can also be adapted to the type of problem in which you need to find the volume of a stock solution that must be diluted to a certain volume in order to produce a solution of a given concentration. For example, what volume of 0.029 M CaCl2 must be diluted to exactly 0.500 L in order to give a solution that is 50.0 µM?
In order to solve this problem in the simplest of terms, we should re-examine Equation 7.1.
This equation can be re-written as:
where Ci and Cf are the stock and final concentrations, respectively, V is the volume of the aliquot and Vf is the final volume of the solution. Stated another way, this is simply a set of ratios; aliquot to final volume, and final concentration to initial concentration (operationally, these ratios will always be “small value/larger value”). Working with this set of ratios, we can directly solve this type of problem as follows:
First, we need to convert our final concentration (50.0 µM) into M, to match the units of our stock solution. The metric multiplier for µ is 10-6, making our final concentration 50.0 10-6 M, or more properly, 5.00 10-5 M. Our equation is therefore:
The volume of the aliquot, V, is 8.62 10-4 L, or using the conversion factor
, the required volume is 0.86 mL (there are only two significant figures in the concentration of the stock solution, 0.029 M).
Dilution problems can be solved directly using Equation 7.1, or, as you become more comfortable with the math, using the initial and final ratios like we did in this problem (remember, the numbers in the two ratios are “smaller/larger”).
A 1.50 mL aliquot of a 0.177 M solution of sulfuric acid (H2SO4) is diluted into 10.0 mL of distilled water,
to give solution A. A 10.0 mL aliquot of A is then diluted into 50.0 mL of distilled water, to give
solution B. Finally, 10.0 mL of B is diluted into 900.0 mL of distilled water to give solution C.
Additional distilled water is then added to C to give a final volume of 1.0000 L. What is the final
concentration of sulfuric acid in solution C?
A solution was prepared by mixing 250 mL of 0.547 M NaOH with 50.0 mL of 1.62 M NaOH and then diluting to a
final volume of 1.50 L. What is the molarity of Na+ in this solution? To what final volume should 75.00 mL of 0.889 M HCl(aq) be diluted to prepare 0.800 M HCl(aq)?
Study Points
edit- Covalent bonds formed between atoms of differing electronegativity are polarized, resulting in a bond that is electron-rich on one end and electron-poor on the other. Covalent bonds that are polarized are said to have a dipole, where the term dipole moment refers to the direction and magnitude of the charge separation.
- If a molecule is asymmetric (such as a molecule with a bend structure) local dipoles along covalent bonds can combine, generating a molecular dipole, in which the entire molecule has an imbalance with regard to electron distribution. This can be shown with an dipole arrow (with a positive end) indicating the direction of the charge separation in the molecule.
- If a molecule is symmetrical (such as BH3, which is trigonal planar), the individual dipoles associated with the covalent bonds cancel, leaving a molecule with no molecular dipole.
- Water has a significant molecular dipole, allowing it to strongly interact with other polar molecules and with individual ions from ionic compounds. Because of this, water is able to break the electrostatic attraction between ions in compounds and to move the ions into solution. In solution, cations will be surrounded by a solvation shell where the water molecules are oriented so that the negative end of the water molecule interacts with the cation. Likewise, the cationic end of water will surround and solvate anions.
- Molarity is simply defined as the number of moles of a solute dissolved in one liter of solvent, or . The abbreviation for molarity is the uppercase M.
- You should remember that concentration multiplied by volume gives the number of moles of solute; .
- When you are given the amount of solute in grams, remember, mass divided by molar mass gives moles. Dividing this by volume (in liters) gives molarity; .
- In a standard solution, we simply know the molarity of the solute(s). Because concentration (the molarity) multiplied by volume gives us moles, we can calculate the number of moles in given volume and use this value in standard stoichiometric calculations.
- A sample of a solution of known volume is called an aliquot. When an aliquot of a solution is diluted into a larger volume, the final concentration can be calculated as:
, or,
where Ci and Cf are the stock and final concentrations, respectively, V is the volume of the aliquot and Vf is the final volume of the solution. This relationship is also often stated as V1C1 = V2C2, where the subscripts refer to the initial and final concentrations and volumes.
Acids, Bases and pH
Chapter 8.Acids, Bases and pH
editWe have all heard of acids… acid indigestion, the acid content of vinegars and cheap wines, vats of sulfuric acid and arch villains. In the last chapter we learned about the molecular dipole in water and how water molecules form hydrogen bonds among themselves, and to other polar molecules. In this chapter we will see that this hydrogen bonding can be strong enough to actually break the O—H bonds in water and in other hydrogen bonded molecules, transferring the proton to water to form the hydronium ion, H3O+. In its simplest sense, the formation of the hydronium ion is the “acidity” that we are all familiar with. We will see how we measure this acidity (the pH scale). We will get an introduction to the concept of equilibrium and you will finally come to appreciate the utility of the log and anti-log buttons on your scientific calculator!
8.1 Hydrogen Bonding
editIn Chapter 7, we explored the unique properties of water that allow it to serve as a powerful solvent with the ability to dissolve both ionic compounds, as well as polar molecular compounds. We attributed this to the ability of water molecules to align themselves so that the polarized hydrogen-oxygen bonds could stabilize cations, anions, and virtually any compound that also contained a significantly polarized covalent bond. By this logic, it is not at all surprising that water can also react strongly with itself, and indeed water exists as a vast network of molecules aligned so that their positive and negative dipoles interact with each other. This is shown in the drawing in Figure 8.1, and the dotted lines indicate interactions between hydrogens (the positive end of the molecular dipole) and oxygens (the negative end of the dipole). A bond that is formed from a hydrogen atom, which is part of a polar covalent bond (such as the O—H bond) to another, more electronegative atom (that has at least one unshared pair of electrons in its valence shell) is called a hydrogen bond. Recall that oxygen has two unshared pairs in its valence shell, and the hydrogen-oxygen interaction in water is the classic example of a hydrogen bond. Hydrogen bonds are weak, relative to covalent bonds. The energy required to break the O—H covalent bond (the bond dissociation energy) is about 111 kcal/mole, or in more proper SI units, 464 kJ/mole. The energy required to break an O—H••••O hydrogen bond is about 5 kcal/mole (21 kJ/mole), or less than 5% of the energy of a “real” covalent bond. Even though hydrogen bonds are relatively weak, if you consider that every water molecule is participating in a least four hydrogen bonds, the total energy of hydrogen bonding interactions can rapidly become significant. Hydrogen bonding is generally used to explain the high boiling point of water (100 ˚C). For many compounds which do not possess highly polarized bonds, boiling points parallel the molar mass of the compound. Methane, CH4, has a molar mass of 16 and a boiling point of –164 ˚C. Water, with a molar mass of 18, has a boiling point of +100 ˚C. Although these two compounds have similar molar masses, a significant amount of energy must be put into the polar molecule, water, in order to move into the gas phase, relative to the non-polar methane. The extra energy that is required is necessary to break down the hydrogen bonding network.
Hydrogen bonding is also important is DNA. According to the Watson-Crick model, the double helix of DNA is assembled and stabilized by hydrogen pairing between matching “bases”. In Figure 8.2, the hydrogen bonds between adenine and thymidine are shown as the faint dotted lines. The hydrogen bonds are formed between the oxygen atoms (red) and the adjacent N—H bonds, and between the central nitrogen (blue) and the adjacent N—H bond. It is suggested that the precise alignment of these hydrogen bonds contributes to stability of the double helix and ensures the proper alignment of the corresponding base pairs.
8.2 Ionization of Acids in Solution
editIn general, acids can be thought of as molecular compounds containing at least one hydrogen which is covalently bonded to a more electronegative atom. As an example, consider the compound hydrogen fluoride (HF). As we discussed in Chapter 7, the electronegativities of hydrogen and fluorine are 2.1 and 4.0, respectively, and the hydrogen-fluoride covalent bond is very highly polarized, as shown in the electrostatic potential map shown in Figure 8.3.
Because of this, when hydrogen fluoride is dissolved in water, water molecules orient themselves around HF so that the water dipoles interact with, and stabilize, the highly polarized H—F bond. Important to this stabilization is the hydrogen bond that is formed between the hydrogen of HF and the oxygen of an adjacent water. This hydrogen bond not only stabilizes the HF molecular dipole, but it also weakens the H—F covalent bond. As a result of this weakening, the H—F bond stretches (the bond length increases) and then fully breaks. The hydrogen that was hydrogen-bonded to the water molecule now becomes fully bonded to the oxygen, forming the species H3O+ (the hydronium ion) and the fluorine now exists as a fluoride anion. This is known as the process of acid dissociation and the steps in this process are shown using “ball and stick” molecular models in Figure 8.4.
The chemical equation describing the acid dissociation reaction of HF is given in Equation 8.1a. The products of the reaction, fluoride anion and the hydronium ion, are oppositely charged ions, and it is reasonable to assume that they will be attracted to each other. If they do come in contact, it is also reasonable to suggest that the process of hydrogen transfer that we described above can also happen in reverse. That is, H3O+ can hydrogen bond to the fluoride ion and the hydrogen can be transferred back, to form HF and water. The chemical equation describing this process is shown in Equation 8.1b. In fact, these two reaction do occur simultaneously (and very rapidly) in solution. When we speak of a set of forward- and back-reactions that occur together on a very fast time-scale, we describe the set of reactions as an equilibrium and we use a special double arrow in the chemical reaction to show this (Equation 8.1c). Equation 8.1c can be said to represent the equilibrium dissociation of HF in water.
HF (aq) + H2O → H3O+ (aq) + F– (aq)Eq. 8.1a
HF (aq) + H2O←H3O+ (aq) + F– (aq)Eq. 8.1b
HF (aq) + H2O ⇄ H3O+ (aq) + F– (aq) Eq. 8.1c
For any equilibrium, an equilibrium constant can be written that describes whether the products or the reactants will be the predominant species in solution. We will address this fully in Chapter 10, but according to the Law of Mass Action, the equilibrium constant, K for this reaction, is simply given by the ratio of the concentrations of the products and the reactants (concentrations from each side are multiplied together if there is more than one). Note that any solid or liquid reactants or products (such as water) are not included in the expression. Thus for the ionization of HF;
.
When you are dealing with acids, the equilibrium constant is generally called an acid dissociation constant, and is written as Ka. The larger the value of Ka, the greater the extent of ionization and the higher the resulting concentration of the hydronium ion. Because the concentration of the hydronium ion is directly correlated with acidity, acids with a large value of Ka are termed strong acids. We will introduce “weak acids” in Chapter 10, but for now the important thing to remember is that strong acids are virtually 100% ionized in solution. That doesn’t mean that the back-reaction does not occur, is simply means that much more favorable and that 99.9999999999% of the acid is present in its ionized form. Because this exceeds the number of significant figures that we typically work with, strong acids are generally described as 100% ionized in solution. Table 8.1 lists the common strong acids that we will study in this text.
Table 8.1. Common Strong Acids
HCl | hydrochloric acid |
HNO3 | nitric acid |
H2SO4 | sulfuric acid |
HBr | hydrobromic acid |
HI | hydroiodic acid |
HClO4 | perchloric acid |
8.3 Conjugate Acid-Base Pairs
editAcid dissociation reactions are often described in terms of the concepts of conjugate acids and their corresponding conjugate bases. The description of “acids and bases” that we will deal with in this text will be limited to simple dissociation reactions, like those shown above, where a hydronium ion is produced. This description is referred to as the Brønsted-Lowery Acid-Base Theory, and in the Brønsted theory, the conjugate acid is defined as the species that donates a hydrogen in the forward reaction, and the conjugate base is the species that accepts a hydrogen the reverse reaction. Thus for the ionization of HCl, HCl is the conjugate acid and Cl– is the conjugate base.
HCl (aq) + H2O ⇄ H3O+ (aq) + Cl– (aq)
In the discussion of Brønsted acid-base behavior, the hydrogen atom that is transferred is generally referred to as a proton, because it is transferred as a hydrogen atom without its electron. Thus for the ionization of HCl, HCl (the conjugate acid) is a proton donor and Cl– (the conjugate base) is a proton acceptor. In General Chemistry you will learn that acid-base behavior can also be described in terms of electron donors and electron acceptors (the Lewis Acid-Base Theory in which an acid is an electron acceptor and a base is an electron donor), but here we will limit our discussion to simple, strong, Brønsted acids and bases.
Example 8.1 Identifying Conjugate Acids and Conjugate Bases
For each of the reactions given below, identify the conjugate acid and the conjugate base. For example (d), also identify the conjugate acid and the conjugate base in the reverse reaction.
a.HClO4 (aq) + H2O ⇄ H3O+ (aq) + ClO4– (aq)
b.H2SO4 (aq) + H2O ⇄ H3O+ (aq) + HSO4– (aq)
c.HSO4– (aq) + H2O ⇄ H3O+ (aq) + SO22- (aq)
d.HNO3 (aq) + NH3 ⇄ NH4+ (aq) + NO3– (aq)
Exercise 8.1 Identifying Conjugate Acids and Conjugate Bases
For each of the reactions given below, identify the conjugate acid and the conjugate base.
a) H2PO4- + H3O+ ⇄ H2O + H3PO4
b) NH3(g) + H2O ⇄ NH4+(aq) + OH-(aq)
c) H2O(l) + HNO2(aq) ⇄ H3O+(aq) + NO2-(aq)
8.4 Acids-Bases Reactions: Neutralization
editIn Chapter 5, we examined a special case of a double replacement reaction in which an acid reacted with a base to give water and a pair of ions in solution. In the context of the Brønsted Theory, a base can be thought of as an ionic compound that produces the hydroxide anion in solution. Thus, sodium hydroxide, NaOH, ionizes to form the sodium cation and the hydroxide anion (HO–).
NaOH (aq) → Na+ (aq) + HO– (aq)
We have written this equation using a single arrow because sodium hydroxide is a strong base and is essentially 100% ionized in solution. The hydroxide anion (HO–) reacts with the hydronium ion (H3O+) to form two moles of water, as shown in the equation given below.
H3O+ + HO– → 2 H2O
Thus, if you have aqueous solutions of HCl and NaOH, the following process occur:
- HCl ionizes to form the hydronium ion:
HCl (aq) + H2O ⇄ H3O+ (aq) + Cl– (aq)
- NaOH ionizes to form the hydroxide anion:
NaOH (aq) → Na+ (aq) + HO– (aq)
- HO– reacts with H3O+ to form two moles of water:
H3O+ + HO– → 2 H2O
If we add up the set of three equations, we see that hydronium and hydroxide ions appear on both sides of the arrow and cancel, leaving:
HCl (aq) + NaOH (aq) → H2O + NaCl (aq)
In this equation, we have not shown the additional water from the hydronium ion and we have grouped the sodium and chloride ions as NaCl (aq), with the understanding that it will be fully ionized in aqueous solution. This is an example of a neutralization reaction; an acid and a base have reacted to form water. When we write neutralization equations we generally do not show hydronium or hydroxide ions and we generally show ionic species as distinct compounds. Neutralization equations therefore look very much like the other double replacements that we studied in Chapter 5.
Example 8.2 Writing and Balancing Neutralization Equations
For each of the following, write a balanced neutralization equation:
a.The reaction of calcium hydroxide with hydrochloric acid.
b.The reaction of sodium hydroxide with sulfuric acid (both ionizations).
c.The reaction of barium hydroxide with nitric acid.
Exercise 8.2 Writing and Balancing Neutralization Equations
Write a balanced neutralization equation for the reaction of calcium hydroxide
with sulfuric acid.
8.5 The Meaning of Neutrality: The Autoprotolysis of Water
editIn the previous section, we described the reaction of an acid and a base to form water. When all of the acid and base have been consumed, we are left with water and an aqueous solution containing an ionic compound. Another way to think of this would be to say that, the acid we began with had a high concentration of hydronium cations (H3O+), the base had a high concentration of hydroxide anions (HO–) and the neutral solution contains only water. This, however, is a little too simplistic. Just like water can promote the ionization of acids, water can also promote the ionization of itself. Picture two water molecules sharing a hydrogen bond. Just like we saw in Figure 8.4 for HF , the partially bonded hydrogen can transfer along the hydrogen bond to form a hydronium cation and a hydroxide anion (Figure 8.5). This process occurs very rapidly in pure water, thus, any sample of pure water will always contain a small concentration of hydronium and hydroxide ions. How small is “small”? Very small! In pure water at 25 oC, the concentration of hydronium ions ([H3O+]) and hydroxide ions ([HO–]) will both be equal to exactly 1 × 10-7 M. Based on this, we can expand upon our definitions of acidic, basic and neutral solutions:
- A solution is acidic if [H3O+] > 1 × 10-7 M.
- A solution is basic if [H3O+] < 1 × 10-7 M.
- A solution is neutral if [H3O+] = 1 × 10-7 M.
Working with these definitions, if you have a solution with [H3O+] = 4.5 × 10-4 M, it will be acidic (4.5 × 10-4 > 1 × 10-7). If you have a solution with [H3O+] = 1 × 10-4 M, it will be basic (1 × 10-4 < 1 × 10-7). Finally, a neutral solution is one in which [H3O+] and [HO–] are both 1 × 10-7 M.
Recalling our discussion of acid dissociation constants from Section 8.2, we can write the ionization equilibrium for water and the expression for the dissociation constant, Ka, as shown below:
Because the molar concentration of water (in pure water) is 55.5 M, the term for [H2O] is essentially a constant and can be neglected (recall the law of mass action). When we do this, we call the dissociation constant KW, where KW is defined as . At neutrality and 25 oC, [H3O+] and [HO–] are both 1 × 10-7 M, therefore:
.
This simple relationship is actually quite powerful. Because KW is a constant, if we know either a hydronium ion or a hydroxide ion concentration, we can directly calculate the concentration of the other species. For example, if you are given that [H3O+] is 1 × 10-4 M, [HO–] can be calculated as:
Example 8.3 Calculating [H3O+] and [HO-] using KW
a. A solution at 25 oC, is known to have a hydronium ion concentration of 4.5 × 10-5 M;
what is the concentration of hydroxide ion in this solution?
b. A solution at 25 oC, is known to have a hydroxide ion concentration of 7.5 ×
10-2 M; what is the concentration of hydronium ion in this solution?
Exercise 8.3 Calculating [H3O+] and [HO-] using KW
A solution is known to have a hydronium ion concentration of 9.5 × 10-8 M;
what is the concentration of hydroxide ion in this solution?
8.6 pH Calculations
editOne thing that you should notice about the numbers in the previous examples is that they are very small. In general, chemists find that working with large negative exponents like these (very small numbers) is cumbersome. To simplify the process, calculations involving hydronium ion concentrations are generally done using logarithms. Recall that a logarithm is simply the exponent that some base number needs to be raised to in order to generate a given number. In these calculations, we will use a base of 10. A number such as 10,000 can be written as 104, so by the definition, the logarithm of 104 is simply 4. For a small number such as 10-7, the logarithm is again simply the exponent, or -7. Before calculators became readily available, taking the logarithm of a number that was not an integral power of 10 meant a trip to “log tables” (or even worse, using a slide rule). Now, pushing the LOG button on an a scientific calculator makes the process trivial. For example, the logarithm of 14,283 (with the push of a button) is 4.15482. If you are paying attention, you should have noticed that the logarithm contains six digits, while the original number (14,283) only contains five significant figures. This is because a logarithm consists of two sets of numbers; the digits to the left of the decimal point (called the characteristic) simply reflect the integral power of 10, and are not included when you count significant figures. The numbers after the decimal (the mantissa) should have the same significance as your experimental number, thus a logarithm of 4.15482 actually represents five significant figures.
There is one other convention that chemists apply when they are dealing with logarithms of hydronium ion concentrations, that is, the logarithm is multiplied by (-1) to change its sign. Why would we do this? In most aqueous solutions, [H3O+] will vary between 10-1 and 10-13 M, giving logarithms of –1 to –13. To make these numbers easier to work with, we take the negative of the logarithm (-log[H3O+]) and call it a pH value. The use of the lower-case “p” reminds us that we have taken the negative of the logarithm, and the upper-case “H” tells us that we are referring to the hydronium ion concentration. Converting a hydronium ion concentration to a pH value is simple. Suppose you have a solution where [H3O+] = 3.46 × 10-4 M and you want to know the corresponding pH value. You would enter 3.46 × 10-4 into your calculator and press the LOG button. The display should read “-3.460923901”. First, we multiply this by (-1) and get 3.460923901. Next, we examine the number of significant figures. Our experimental number, 3.46 × 10-4 has three significant figures, so our mantissa must have three digits. We round our answer and express our result as, pH = 3.461.
The reverse process is equally simple. If you are given a pH value of 7.04 and are asked to calculate a hydronium ion concentration, you would first multiply the pH value by (-1) to give –7.04. Enter this in your calculator and then press the key (or key combination) to calculate “10x”; your display should read “9.120108 × 10–8”. There are only two digits in our original mantissa (7.04) so we must round this to two significant figures, or [H3O+] = 9.1 × 10-8.
Example 8.4 Calculating [H3O+] and pH Values
a. A solution is known to have a hydronium ion concentration of 4.5 ×
10-5 M; what is the pH this solution?
b. A solution is known to have a pH of 9.553; what is the concentration of
hydronium ion in this solution?
Exercise 8.4 Calculating [H3O+] and pH Values
a. A solution is known to have a hydronium ion concentration of 9.5 ×
10-8 M; what is the pH this solution?
b. A solution is known to have a pH of 4.57; what is the hydronium ion
concentration of this solution?
There is another useful calculation that we can do by combining what we know about pH and expression
. We know that KW = 10-14 and we know that (-log [H3O+]) is pH. If we define (-log [HO–]) as pOH, we can take our expression for KW and take the (-log) of both sides (remember, algebraically you can perform the same operation on both sides of an equation) we get:
Which tells us that the values of pH and pOH must always add up to give 14! Thus, if the pH is 3.5, the pOH must be 14 – 3.5 = 11.5. This relationship is quite useful as it allows you to quickly convert between pH and pOH, and therefore between [H3O+] and [HO–].
We can now re-address neutrality in terms of the pH scale:
- A solution is acidic if pH < 7.
- A solution is basic if pH > 7.
- A solution is neutral if pH = 7.
The simplest way to determine the pH of a solution is to use an electronic pH meter (Figure 8.6). A pH meter is actually a sensitive millivolt meter that measures the potential across a thin, sensitive glass electrode that is immersed in the solution. The voltage that develops is a direct function of the pH of the solution and the circuitry is calibrated so that the voltage is directly converted into the equivalent of a pH value. You will most likely use a simple pH meter in the laboratory. The thing to remember is that the sensing electrode has a very thin, fragile, glass membrane and is somewhat expensive to replace. Be careful!
A simple way to estimate the pH of a solution is by using an indicator. A pH indicator is a compound that undergoes a change in color at a certain pH value. For example, phenolphthalein (Figure 8.7) is a commonly used indicator that is colorless at pH values below 9, but is pink at pH 10 and above (at very high pH it becomes colorless again). In the laboratory, a small amount of phenolphthalein is added to a solution at low pH and then a base is slowly added to achieve neutrality. When the phenolphthalein changes from colorless to pink, you know that enough base has been added to neutralize all of the acid that is present. In reality, the transition occurs at pH 9.2, not pH 7, so the resulting solution is actually slightly alkaline, but the additional hydroxide ion concentration at pH 9 (10-5 M) is generally insignificant relative to the concentrations of the solutions being tested.
A convenient way to estimate the pH of a solution is to use pH paper. This is simply a strip of paper that has a mixture of indicators embedded in it. The indicators are chosen so that the paper takes on a slightly different color over a range of pH values. The simplest pH paper is litmus paper that changes from pink to blue as a solution goes from acid to base. Other pH papers are more exotic. Figure 8.8 shows a common commercial pH paper that changes colors gradually over a pH range of 1 to 12. In the laboratory, you will use both indicators, like phenolphthalein, and pH papers in neutralization experiments called titrations, as described in the following section.
8.7 Titrations: Neutralization and Stoichiometry
editOne of the standard laboratory exercises in General Chemistry is an acid-base titration. In order to perform an acid-base titration, you must have a solution of acid or base with a known concentration. You then slowly add a known volume of this solution, using a volumetric burette, to an acid or base solution with an unknown concentration until neutrality has been achieved. At that point, you know the volume and concentration of the reactant you have added, which means that you can calculate the number of moles that you added. Based on the stoichiometry of your neutralization reaction, you then know how many moles of acid or base were in the unknown sample. How do you know when you have reached neutrality? Generally an indicator or a pH meter is used (as described in Section 8.5). For example, if we had a solution of NaOH that was exactly 0.100 M and we had a beaker containing an unknown concentration of HCl. To perform the titration we would add a few drops of a stock phenolphthalein solution to our HCl, and then slowly add a measured amount of the NaOH solution until all of the acid had been consumed and the indicator changed from colorless to pink (Figure 8.9).
Working with the above example, if the volume of base that we added (as measured on the buret) was 12.6 mL, we could calculate the number of moles present in the unknown acid solution. This is equal to the known concentration of our NaOH (0.100 M) multiplied by the volume required for neutrality (0.0126 L), or:
If we had used exactly 100.0 mL of our unknown acid in our titration, the concentration of our acid would be:
.
Example 8.5 Acid-Base Titrations
a. You are given a solution containing an unknown concentration of HCl. You
carefully measure 50.0 mL of this solution into a flask and then add a few drops of
phenolphthalein solution. You prepare a buret containing 0.055 M NaOH and
note that the initial level of the solution in the buret is 12.6 mL. You
slowly add the NaOH solution to the acid until the color change just
occurs (as evidence of the color change becomes visible, you carefully
stir the solution after each drop has been added). When the acid
solution turns (and remains) pink, you note that the volume in the buret is now
28.9 mL. What is the concentration of the unknown acid solution?
Exercise 8.5 Acid-Base Titrations
If 25.00 mL of HCl solution with a concentration of 0.1234 M is neutralized by
23.45 mL of NaOH, what is the concentration of the base?
Study Points
edit- A bond that is formed from a hydrogen atom, which is part of a polar covalent bond (such as the O—H bond) to another, more electronegative atom (that has at least one unshared pair of electrons in its valence shell) is called a hydrogen bond. Hydrogen bonds are weak, partially covalent bonds. The bond dissociation energy of the O—H covalent bond 464 kJ/mole; the bond dissociation energy an O—H••••O hydrogen bond is about 21 kJ/mole.
- Even though hydrogen bonds are relatively weak, the vast network of hydrogen bonds in water makes the energy significant, and hydrogen bonding is generally used to explain the high boiling point of water (100 ˚C), relative to molecules of similar mass that cannot hydrogen bond. The extra energy represents the energy required to break down the hydrogen bonding network.
- Polar molecules, such as acids, strongly hydrogen bond to water. This hydrogen bonding not only stabilizes the molecular dipoles, but also weakens the H—A covalent bond (A represents the acid molecule). As a result of this weakening, the H—A bond in these acids stretches (the bond length increases) and then fully breaks. The hydrogen that was hydrogen-bonded to the water molecule now becomes fully bonded to the oxygen, forming the species H3O+ (the hydronium ion) and the acid now exists as an anion (A–); this is the process of acid dissociation.
- The hydronium ion and the acid anion that are formed in an acid dissociation can react to re-form the original acid. This represents a set of forward- and back-reactions that occur together on a very fast time-scale; this type of a set of reactions is called an equilibrium and a double arrow is used in the chemical reaction to show this. This type of reaction is referred to as an acid dissociation equilibrium.
- For any equilibrium, an equilibrium constant can be written that describes whether the products or the reactants will be the predominant species in solution. For the dissociation of the simple acid, HA, the equilibrium constant, Ka, is simply given by the ratio of the concentrations of the products and the reactants, excluding any solid or liquid reactants or products (such as water). Thus for the ionization of HA;
.
- According to the Brønsted Acid-Base Theory, any substance that ionizes in water to form hydronium ions (a proton donor) is called an acid; any substance that accepts a proton from a hydronium ion is a base. In an acid-base equilibrium, the conjugate acid is defined as the species that donates a hydrogen (a proton) in the forward reaction, and the conjugate base is the species that accepts a hydrogen (a proton) the reverse reaction. Thus for the ionization of HCl, HCl is the conjugate acid and Cl– is the conjugate base.
- Metal hydroxides, such as NaOH, dissolve in water to form metal cations and hydroxide anion. Hydroxide anion is a strong Brønsted base and, therefore, hydroxide anion accepts a proton from the hydronium ion to form two moles of water. The reaction of a Brønsted acid with a Brønsted base to form water is the process of neutralization.
- Just like water can promote the ionization of acids, water can also promote the ionization of itself. This equilibrium process occurs very rapidly in pure water and any sample of pure water will always contain a small concentration of hydronium and hydroxide ions. In pure water, at 25 oC, the concentration of hydronium ions ([H3O+]) and hydroxide ions ([HO–]) will both be equal to exactly 1 × 10-7 M. This is referred to as the autoprotolysis of water.
- The equilibrium for the autoprotolysis of water is defined as' Kw', according to the equation shown below:
, and at neutrality, [H3O+] and [HO–] are both 1 × 10-7 M, making the value of Kw:
.
- Based on the autoprotolysis equilibrium, acidic, basic and neutral solutions can be defined as:
- A solution is acidic if [H3O+] > 1 × 10-7 M.
- A solution is basic if [H3O+] < 1 × 10-7 M.
- A solution is neutral if [H3O+] = 1 × 10-7 M.
- A pH value is simply the negative of the logarithm of the hydronium ion concentration (-log[H3O+]).
- Remember that a logarithm consists of two sets of numbers; the digits to the left of the decimal point (the characteristic) reflect the integral power of 10, and are not included when you count significant figures. The numbers after the decimal (the mantissa) have the same significance as your experimental number, thus a logarithm of 4.15482 represents five significant figures.
- In an acid-base titration a solution of acid or base with a known concentration is slowly add to an acid or base solution with an unknown concentration, using a volumetric burette, to until neutrality has been achieved. Typically an indicator or a pH meter is used to signify neutrality.
- At neutrality, the volume and concentration of the reactant you have added is known, which means that you can calculate the number of moles that you added (remember, concentration × volume = moles). Based on the stoichiometry of your neutralization reaction, you then know how many moles of acid or base were in the unknown sample.
Supplementary Problems
edit
Gaseous State
Chapter 9. The Gaseous State
editSome of the first real breakthroughs in the study of chemistry happened in the study of the gaseous state. In gases, the volume of the actual gas particles is but a tiny fraction of the total volume that the gas occupies. This allowed early chemists to relate parameters such as volume and the number of gas particles, leading to the development of the mole concept. As we have seen in previous chapters, the notion of a chemical mole allows us to do quantitative chemistry and lead us to the point where we can routinely address reaction stoichiometry, etc. In this chapter, we will visit some of the early observations that lead to our current understand of gasses and how they behave. We will see how the relationships between pressure and volume; volume and temperature and volume and moles lead to the ideal gas laws and how these simple rules can allow us to do quantitative calculations in the gas phase.
9.1 Gasses and Atmospheric Pressure
editIn Chapter 2, we learned about the three principle states of matter; solids, liquids and gasses. We explained the properties of the states of matter using the kinetic molecular theory (KMT). Substances in the gaseous state, according to the KMT, have enough kinetic energy to break all of the attractive forces between the individual gas particles and are therefore free to separate and rapidly move throughout the entire volume of their container. Because there is so much space between the particles in a gas, a gas is highly compressible. High compressibility and the ability of gases to take on the shape and volume of its container are two of the important physical properties of gasses.
The gas that we are all most familiar with is the mixture of elements and compounds that we call the “atmosphere”. The air that we breath is mostly nitrogen and oxygen, with much smaller amounts of water vapor, carbon dioxide, noble gasses and the organic compound, methane (Table 9.1).
Table 9.1. Approximate Composition of the Atmosphere
Concentration, Parts per Billion | Percentage
| |
A gas that is enclosed in a container exerts a pressure on the inner walls of that container. This pressure is the result of the countless collisions of the gas particles with the container wall (Figure 9.1)(. As each collision occurs, a small amount of energy is transferred, generating a net pressure. Although we are generally unaware of it, the gasses in the atmosphere generate a tremendous pressure on all of us. At sea level, atmospheric pressure is equal to 14.7 pounds per square inch. Putting this in perspective, for a person of average height and build, the total pressure from the atmosphere pressing on their body is about 45,000 pounds! Why aren’t we squashed? Remember, we also have air inside our bodies and the pressure from the inside balances the pressure outside, keeping us nice and firm, not squishy!
The proper SI unit for pressure is the Pascal (Pa), where 1 Pa = 1 kg m-1 s-2. In chemistry, however, it is more common to measure pressure in terms of atmospheres (atm) where 1 atm is atmospheric pressure at sea level, or 1 atm = 14.7 pounds per square inch (1 atm = 101,325 Pa). Atmospheric pressure is typically measured using a device called a barometer. A simple mercury barometer (also called a Torricelli barometer, after its inventor) consists of a glass column, about 30 inches high, closed at one end and filled with mercury. The column is inverted and placed in an open, mercury-filled reservoir. The weight of the mercury in the tube causes the column to drop to the point that the mass of the mercury column matches the atmospheric pressure exerted on the mercury in the reservoir. The atmospheric pressure is then read as the height of the mercury column. Again, working at sea level, 1 atmosphere is exactly equal to a column height of 760 mm of mercury. The units for the conversion are 1 atm = 760 mm Hg, and this is an exact relationship with regard to significant figures. The unit torr (after Torricelli) is sometimes used in place of mm Hg. A schematic of a mercury barometer is shown in Figure 9.2.
9.2 The Pressure-Volume Relationship: Boyle’s Law
editThe kinetic molecular theory is useful when we are trying to understand the properties and behaviors of gases. The KMT (and related theories) tell us that:
- There is a tremendous amount of distance between individual particles in the gas phase.
- Gas particles move randomly at various speeds and in every possible direction.
- Attractive forces between individual gas particles are negligible.
- Collisions between gas particles are fully elastic.
- The average kinetic energy of particles in the gas phase is proportional to the temperature of the gas.
In reality, these predictions only apply to “ideal gases”. An ideal gas has perfectly elastic collisions and has no interactions with its neighbors or with the container. Real gases deviate from these predictions, but at common temperatures and pressures, the deviations are generally small and in this text we will treat all gases as if they were “ideal”.
Because there is so much empty space between gas molecules, it is easy to see why a gas is so compressible. If you have a container filled with a gas, you can squeeze it down to a smaller volume by applying pressure. The harder you squeeze (the more pressure you apply) the smaller the resulting volume will be. Imagine a bicycle pump compressing air into a tire (Figure 9.3). As pressure is applied to the pump, the same number of gas molecules are squeezed into a smaller volume.
The dependence of volume on pressure is not linear. In 1661, Robert Boyle systematically studied the compressibility of gasses in response to increasing pressure. Boyle found that the dependence of volume on pressure was non-linear (Figure 9.4) but that a linear plot could be obtained if the volume was plotted against the reciprocal of the pressure, 1/P. This is stated as Boyle’s law:
The volume (V) of an ideal gas varies inversely with the applied pressure (P) when the temperature (T) and the number of moles (n) of the gas are constant.
Mathematically, Boyle’s law can be stated as:
, and
We can use Boyle’s law to predict what will happen to the volume of a sample of gas as we change the pressure. Because PV is a constant for any given sample of gas (at constant T), we can imagine two states; an initial state with a certain pressure and volume (P1V1), and a final state with different values for pressure and volume (P2V2). Because PV is always a constant, we can equate the two states and write:
Now imagine that we have a container with a piston that we can use to compress the gas inside (for example, Figure 9.5). You are told that, initially, the pressure in the container is 765 mm Hg and the volume is 1.00 L. The piston is then adjusted so that the volume is now 0.500 L; what is the final pressure?
We substitute into our Boyle’s law equation:
, or,
Example 9.1 Pressure-Volume Relationships
A container with a piston contains a sample of gas. Initially, the pressure in
the container is exactly 1 atm, but the volume is unknown. The piston is
adjusted so that the volume is 0.155 L and the pressure is 956 mm Hg; what was
the initial volume?
Exercise 9.1 Pressure-Volume Relationships
The pressure of 12.5 L of a gas is 0.82 atm. If the pressure changes to 1.32 atm,
what will the final volume be? A sample of helium gas has a pressure of 860.0 mm Hg. This gas is transferred to a
different container having a volume of 25.0 L; in this new container, the
pressure is determined to be 770.0 mm Hg. What was the initial volume of the gas?
9.3 The Temperature-Volume Relationship: Charles’s Law
editFigure 9.6 shows a fun laboratory demonstration in which a fully inflated balloon is placed in liquid nitrogen (at a temperature of –196 ˚C) and it shrinks to about 1/1000th of its former size. If the balloon is carefully removed and allowed to warm to room temperature, it will again be fully inflated.
This is a simple demonstration of the effect of temperature on the volume of a gas. In 1787, Jacques Charles performed a systematic study of the effect of temperature on gases. Charles took samples of gases at various temperatures, but at the same pressure, and measured their volumes. A plot showing representative results is shown in Figure 9.7.
The first thing to note is that the plot is linear. When the pressure is constant, volume is a direct linear function of temperature. This is stated as Charles’s law:
The volume (V) of an ideal gas varies directly with the temperature of the gas (T) when the pressure (P) and the number of moles (n) of the gas are constant.
We can express this mathematically as:
, and
Figure 9.7 shows data for three different samples of the same gas; 0.25 moles, 0.50 moles and 0.75 moles. All of these samples behave as predicted by Charles’s law (the plots are all linear), but , if you extrapolate each of the lines back to the y-axis (the temperature axis), all three lines intersect at the same point! This point, with a temperature of –273.15 ˚C, is the theoretical point where the samples would have “zero volume”. This temperature, -273.15 ˚C, is called absolute zero. An even more intriguing thing is that the value of absolute zero is independent of the nature of the gas that is used. Hydrogen, oxygen, helium, argon, (or whatever), all gases show the same behavior and all intersect at the same point.
The temperature of this intersection point is taken as “zero” on the Kelvin temperature scale. The abbreviation used in the Kelvin scale is K (no degree sign) and there are never negative values in degrees Kelvin. The size of the degree increment in Kelvin is identical to that in Centigrade and Kelvin and centigrade scales are related by the simple conversion:
Please note that whenever you work gas law problems where temperature is one variable, you MUST use the Kelvin scale.
Just like we did for pressure-volume problems, we can use Charles’s law to predict what will happen to the volume of a sample of gas as we change the temperature. Because is a constant for any given sample of gas (at constant P), we can again imagine two states; an initial state with a certain temperature and volume ( ), and a final state with different values for pressure and volume ([ ). Because is always a constant, we can equate the two states and write:
Again, we have a container with a piston that we can use to adjust the pressure on the gas inside. You are told that, initially, the temperature of the gas in the container is 175 K and the volume is 1.50 L. The temperature is changed to 76 K and the piston is then adjusted so that the pressure is identical to the pressure in the initial state; what is the final volume?
We substitute into our Charles’s law equation:
, or,
Example 9.2 Temperature-Volume Relationships
A container with a piston contains a sample of gas. Initially, the pressure in the
container is exactly 1 atm, the temperature is 14.0 ˚C and the volume is 997 mL.
The temperature is raised to 100.0 ˚C and the piston is adjusted so that
the pressure is again exactly 1 atm What is the final volume?
Exercise 9.2 Temperature-Volume Relationships
A 50.0 mL sample of gas at 26.4˚ C, is heated at constant pressure until its
volume is 62.4 mL . What is the final temperature of the gas? A sample container of carbon monoxide occupies a volume of 435 mL at a temperature
of 298 K. What would its temperature be if the pressure remained constant and
the volume was changed to 265 mL? (182 K)
9.4 The Mole-Volume Relationship: Avogadro’s Law
editIn Figure 9.7, we made a plot of the effect of temperature on the volume of a gas at constant pressure. The plot shows three lines, one for 0.025 moles of gas, one for 0.50 moles and one for 0.75 moles. If you take these data and combine them with data for other molar quantities, and plot them as a function of the volume at constant temperature and constant pressure, you can obtain a plot similar to that shown in Figure 9.8. The data in this plot form a linear series, passing through the origin. What this simply says is that the volume of a gas is directly proportional to the number of moles of that gas. This is stated as Avogadro’s law:
The volume (V) of an ideal gas varies directly with the number of moles of the gas (n) when the pressure (P) and the number of temperature (T) are constant.
We can express this mathematically as:
, and
As before, we can use Avogadro’s law to predict what will happen to the volume of a sample of gas as we change the number of moles. Because is a constant for any given sample of gas (at constant P and T), we can again imagine two states; an initial state with a certain number of moles and volume ( ), and a final state with values for a different number of moles and volume ( ). Because is always a constant, we can equate the two states and write:
As an example of this type of problem, we have a container with a piston that we can use to adjust the pressure on the gas inside, and we can control the temperature. You are told that, initially, the container contains 0.20 moles of hydrogen gas and 0.10 mole of oxygen in a volume is 2.40 L. The two gases are allowed to react (a spark ignites the mixture) and the piston is then adjusted so that the pressure is identical to the pressure in the initial state and the container is cooled to the initial temperature; what is the final volume of the product of the reaction?
First, we need to look at the reaction involved. Hydrogen and oxygen react to form water. Two moles of hydrogen react with one mole of oxygen to give two moles of water, as shown below:
Initially we have three moles of gas and, after reaction, we have two moles. We can now substitute into Avogadro’s law:
, or,
Thus we have described the dependence of the volume of a gas on the pressure (Boyle’s law), the temperature (Charles’s law) and the number of moles of the gas (Avogadro’s law). In the following section, we will combine these to generate the Ideal Gas Law, in which all three variables (pressure, temperature and number of moles) can vary independently.
9.5 The Ideal Gas Law
editThe three gas laws that we covered in Section 9.2 – 9.5 describe the effect of pressure, temperature and the number of moles of a gas on volume. The three independent gas laws are:
- Boyle’s law:
- Charles’s law:
- Avogadro’s law:
If volume (V) is proportion to each of these variables, it must also be proportional to their product:
If we replace the proportionality symbol with a constant (let’s just choose R to represent our constant), we can re-write the equation as:
The value of the proportionality constant R, can be calculated from the fact that exactly one mole of a gas at exactly 1 atm and at 0 ˚C (273 K) has a volume of 22.414 L (Figure 9.9). Substituting in the equation:
, or, and
The uncomfortable and somewhat obnoxious constant is called the universal gas constant, and you will need to know it (or look it up) whenever you solve problems using the combined ideal gas law.
Example 9.3 Ideal Gas Law Calculations
What volume will 17.5 grams of N2 occupy at a pressure of 876 mm Hg and
at 123 ˚C?
Many of the problems that you will encounter when dealing with the gas laws can be solved by simply using the “two-state” approach. Because R is a constant, we can equate an initial and a final state as:
for the initial state, and
for the final state, or,.
Using this equation, you can solve for multiple variables within a single problem.
Example 9.4 Ideal Gas Law Calculation; Determining Volume
A sample of oxygen occupies 17.5 L at 0.75 atm and 298 K. The temperature is raised to 303 K and the pressure
is increased to 0.987 atm. What is the final volume of the sample?
If you noticed, we calculated the value of the proportionality constant R based on the fact that exactly one mole of a gas at exactly 1 atm and at 0 ˚C (273 K) has a volume of 22.414 L. This is one of the “magic numbers in chemistry; exactly one mole of any gas under these conditions will occupy a volume of 22.414 L. The conditions, 1 atm and 0 ˚C, are called standard temperature and pressure, or STP. The fact that all gases occupy this same molar volume can be rationalized by realizing that 99.999% of a gas is empty space, so it really doesn’t matter what’s in there, it all occupies the same volume. This realization is attributed to Amedeo Avogadro and Avogadro’s hypothesis, published in 1811, suggested that equal volumes of all gases at the same temperature and pressure contained the same number of molecules. This is the observation that led to the measurement of Avogadro’s number (6.0221415 × 1023), the number of things in a mole. The importance of the “magic number” of 22.414 L per mole (at STP) is that, when combined with the ideal gas laws, any volume of a gas can be easily converted into the number of moles of that gas. This is shown in the following example:
Example 9.5 Ideal Gas Law Calculation; Determining Moles
A sample of methane has a volume of 17.5 L at 100.0 ˚C and 1.72 atm. How many
moles of methane are in the sample?
Exercise 9.3 Ideal Gas Law Calculations
A 0.0500 L sample of a gas has a pressure of 745 mm Hg at 26.4˚ C. The temperature
is now raised to 404.4 K and the volume is allowed to expand until a final
pressure of 1.06 atm is reached. What is the final volume of the gas?
When 128.9 grams of cyclopropane (C3H6) are placed into an
8.00 L cylinder at 298 K, the pressure is observed to be 1.24 atm. A piston in
the cylinder is now adjusted so that the volume is now 12.00 L and the pressure
is 0.88 atm. What is the final temperature of the gas?
9.6 Combining Stoichiometry and the Ideal Gas Laws
editWith an understanding of the ideal gas laws, it is now possible to apply these principles to chemical stoichiometry problems. For example, zinc metal and hydrochloric acid (hydrogen chloride dissolved in water) react to form zinc (II) chloride and hydrogen gas according to the equation shown below:
A sample of pure zinc with a mass of 5.98 g is reacted with excess hydrochloric acid and the (dry) hydrogen gas is collected at 25.0 ˚C and 742 mm Hg. What volume of hydrogen gas would be produced?
This is a “single state” problem, so we can solve it using the ideal gas law, PV = nRT. In order to find the volume of hydrogen gas (V), we need to know the number of moles of hydrogen that will be produced by the reaction. Our stoichiometry is simply one mole of hydrogen per mole of zinc, so we need to know the number of moles of zinc that are present in 5.98 grams of zinc metal. The temperature is given in centigrade, so we need to convert into Kelvin, and we also need to convert mm Hg into atm.
Conversions:
;
Substituting:
, or,
We can also use the fact that one mole of a gas occupies 22.414 L at STP in order to calculate the number of moles of a gas that is produced in a reaction. For example, the organic molecule ethane (CH3CH3) reacts with oxygen to give carbon dioxide and water according to the equation shown below:
A sample problem might read like this; an unknown mass of ethane is allowed to react with excess oxygen and the carbon dioxide produced is separated and collected. The carbon dioxide collected is found to occupy 11.23 L at STP; what mass of ethane was in the original sample?
Because the volume of carbon dioxide is measured at STP, the observed value can be converted directly into moles of carbon dioxide by dividing by 22.414 L mol–1. Once moles of carbon dioxide are known, the stoichiometry of the problem can be used to directly give moles of ethane (molar mass 30.07 g mol-1), which leads directly to the mass of ethane in the sample.
Reaction stoichiometry:
The ideal gas laws allow a quantitative analysis of whole spectrum of chemical reactions. When you are approaching these problems, remember to first decide on the class of the problem:
- If it is a “single state” problem (a gas is produced at a single, given, set of conditions), then you want to use PV = nRT.
- If it is a “two state” problem (a gas is changed from one set of conditions to another) you want to use
.
- If the volume of gas is quoted at STP, you can quickly convert this volume into moles with by dividing by 22.414 L mol-1.
Once you have isolated your approach ideal gas law problems are no more complex that the stoichiometry problems we have addressed in earlier chapters.
Example 9.6 Ideal Gas Law Calculation: Reaction Stoichiometry
An automobile air bag requires about 62 L of nitrogen gas in order to inflate. The nitrogen gas is produced by
the decomposition of sodium azide, according to the equation shown below (Figure 9.10):
What mass of sodium azide is necessary to produce the required volume of nitrogen
at 25 ˚C and 1 atm?
Exercise 9.4 Ideal Gas Law Calculations: Reaction Stoichiometry
When Fe2O3 is heated in the presence of carbon,
CO2 gas is produced, according to the equation shown below. A sample
of 96.9 grams of Fe2O3 is heated in the presence of
excess carbon and the CO2 produced is collected and measured at 1 atm
and 453 K. What volume of CO2 will be observed?
The reaction of zinc and hydrochloric acid generates hydrogen gas, according to
the equation shown below. An unknown quantity of zinc in a sample is observed
to produce 7.50 L of hydrogen gas at a temperature of 404 K and a pressure of
1.75 atm. How many moles of zinc were in the sample?
Study Points
edit- Gasses are compressible because there is so much space between individual gas particles. Energy transferred from the collision of gas particles with their container exerts a gas pressure. In chemistry, we typically measure gas pressure using units of atmospheres (atm) or in mm Hg (also referred to as torr). One atmosphere of pressure equals exactly 760 mm Hg.
- The volume of a gas varies inversely with the applied pressure; the greater the pressure, the smaller the volume. This is relationship is referred to as Boyles’s Law. For a two-state system where the number of moles of gas and the temperature remain constant, Boyle’s Law can be expressed as
.
- The volume of a gas varies directly with the absolute temperature; the higher the temperature, the larger the volume. This is relationship is referred to as Charles’s Law. For a two-state system where the number of moles of gas and the pressure remain constant, Charles’s Law can be expressed as:
- In this equation, the absolute temperature in Kelvin (K) must be used. Kelvin is defined as (degrees centigrade + 273.15). Zero degrees Kelvin is referred to as “absolute zero” and it is the temperature at which (theoretically) all molecular motion would cease.
- The volume of a gas varies directly with the number of moles of the gas that are present; the greater the number of moles, the larger the volume. This is relationship is referred to as Avogadro’s Law. For a two-state system where the temperature and the pressure of a gas remain constant, Avogadro’s Law can be expressed as:
- Because the volume of a gas varies directly with the number of moles of the gas that are present and with the absolute temperature (in Kelvin), and inversely with the pressure, the gas laws can be combined into a single proportionality;
.
This proportionality can be converted to an equality by inserting the proportionality constant R (the universal gas constant), where R = 0.082057 L atm mol-1 K-1, and can be re-written as:
, or rearranging,
.This is referred to as the Ideal Gas Law and is valid for most gasses at low concentrations. For a two-state system where the identity of the gas does not change, the Ideal Gas Law can be expressed as:
.
The gas constant R, is calculated based on the experimental observation that exactly one mole of any gas at exactly 1 atm and at 0 ˚C (273 K) has a volume of 22.414 L. The conditions, 1 atm and 0 ˚C, are called standard temperature and pressure, or STP.
- The ideal gas laws allow a quantitative analysis of whole spectrum of chemical reactions involving gasses. When you are approaching these problems, remember to first decide on the class of the problem:
- If it is a “single state” problem (a gas is produced at a single, given, set of conditions), then you want to use PV = nRT.
- If it is a “two state” problem (a gas is changed from one set of conditions to another) you want to use
.
- If the volume of gas is quoted at STP, you can quickly convert this volume into moles with by dividing by 22.414 L mol-1.
Principles of Chemical Equilibrium
Chapter 10. Principles of Chemical Equilibrium
editAs we have studied chemical reactions in this course, we have used a “reaction arrow” to indicate the process of reactants being converted into products. The implication here is that the reaction is “irreversible”, proceeding in the direction of the arrow. Many simple reactions that we encounter in chemistry, however, are not irreversible, but proceed in both directions with products readily be converted back into reactants. When a set of reactions, such as this, proceed so that the rate of conversion in one direction equals the rate of conversion in the other, we say the reactions are in equilibrium. An equilibrium system is shown by using a set of double arrows, proceeding in opposite directions. An understanding of equilibrium is essential to an appreciation of the concepts behind acid-base behavior, solubility phenomena, etc.
10.1 The Concept of Equilibrium Reactions
editPure dinitrogen tetroxide (N2O4) is a colorless gas that is widely used as a rocket fuel. Although N2O4 is colorless, when a container is filled with pure N2O4, the gas rapidly begins to turn a dark brown (Figure 10.1). A chemical reaction is clearly occurring, and indeed, chemical analysis tells us that the gas in the container is no longer pure N2O4, but has become a mixture of dinitrogen tetroxide and nitrogen dioxide; N2O4 is undergoing a decomposition reaction to form NO2. If the gaseous mixture is cooled, it again turns colorless and analysis tells us that it is again, almost pure N2O4; this means that the NO2 in the mixture can also undergo a synthesis reaction to re-form N2O4. A more detailed analysis of the relative concentrations of N2O4 and NO2 at various times gives us the data that are shown in the plot in Figure 10.2. Initially, only N2O4 is present. As the reaction proceeds, the concentration of N2O4 decreases and the concentration of NO2 increases. However, if you examine the figure, after some time, the concentrations of N2O4 and NO2 have stabilized and, as long as the temperature is not changed, the relative concentrations of the two gasses remain constant.
The reversible reaction of one mole of N2O4, forming two moles of NO2, is a classic example of a chemical equilibrium. We encountered the concept of equilibrium in Chapter 9 when we dealt with the autolysis of water to form the hydronium and hydroxide ions, and with the dissociation of weak acids in aqueous solution.
When we wrote these chemical equations, we used a double arrow to signify that the reaction proceeded in both directions. Using this convention, the dissociation of dinitrogen tetroxide to form two molecules of nitrogen dioxide can be shown as:
If the temperature of our gas mixture is again held constant and the total pressure of the gas in the container is varied, analysis shows that the partial pressure of N2O4 varies as the square of the partial pressure of NO2 (Figure 10.3; remember, the Ideal Gas Laws tell us that the partial pressure of a gas, Pgas, is directly proportional to the concentration of that gas in the container). Mathematically, the relationship between the partial pressures of the two gasses can be expressed by Equation 1.
Equation 1.
10.2 The Equilibrium Constant
editThe constant in Equation 1 is called the equilibrium constant for the reaction. What the equilibrium constant for this reaction tells us is that, regardless of pressures (or concentrations), a mixture of the two gasses will undergo reaction such that the ratios of the partial pressures reach a constant value, given by the equilibrium constant, K. Once this constant ratio has been reached does this mean the reactions stop? Of course not; examine Figure 10.2. In the region of the plot where the concentrations of N2O4 and NO2 are constant (the lines are level) N2O4 is still decomposing to form two molecules of NO2 and two molecules of NO2 are still reacting to synthesize a molecule of N2O4, but the lines are level because the rates of the two chemical reactions have become constant; N2O4 is decomposing at the same rate as two molecules of NO2 are reacting to form N2O4. (Figure 10.4)
In theory, all chemical reactions are equilibria. In practice, however, most reactions are so slow in the reverse direction that they are considered “irreversible”. When a reaction evolves a gas, forms a precipitate or proceeds with the generation of a large amount of heat or light (for example, combustion) the reaction is essentially irreversible. Many chemical reactions are, however, readily reversible and for these reactions the mathematical expression for the equilibrium constant can be written using a simple set of rules.
- Partial pressures (or molar concentrations) of products are written in the numerator of the expression and the partial pressures (or concentrations) of the reactants are written in the denominator.
- If there is more that one reactant or more that one product, the partial pressures (or concentrations) are multiplied together.
- The partial pressure (or concentration) of each reactant or product is then raised to the power that numerically equals the stoichiometric coefficient appearing with that term in the balanced chemical equation.
- Reactants or products that are present as solids or liquids do not appear in the equilibrium expression.
Thus, for the reaction of nitrogen with hydrogen gas to form ammonia:
The expression for the equilibrium constant will have the partial pressure of ammonia in the numerator, and it will be squared, corresponding to the coefficient “2” in the balanced equation; . Because there are two reactants, the partial pressures for nitrogen and hydrogen will be multiplied in the denominator. The partial pressure of nitrogen will be raised to the “first power” (which is not shown) and the partial pressure of hydrogen will be cubed, corresponding to the coefficient “3”;
. The final expression for the equilibrium constant is given in Equation 2.
Equation 2.
Example 10.1 Writing Equilibrium Expressions
For the chemical reactions shown below, write an expression for the equilibrium constant in terms of the partial pressures of the reactants and products.
PCl5 (g) ⇄ PCl3 (g) + Cl2 (g) 2 NOCl (g) ⇄ 2 NO (g) + Cl2 (g)
Exercise 10.1 Writing Equilibrium Expressions
For the chemical reaction shown below, write an expression for the equilibrium constant in terms of the partial pressures of the reactants and products.
PCl3 (g) + 3 NH3 (g) ⇄ P(NH2)3 (g) + 3 HCl (g)
10.3 Calculating Equilibrium Values
editThe numeric value of the equilibrium constant tells us something about the ratio of the reactants and products in the final equilibrium mixture. Likewise, the magnitude of the equilibrium constant tells us about the actual composition of that mixture.
In the three equilibrium systems shown in Figure 10.5, the first depicts a reaction in which the ratio of products to reactants is very small. Because the expression for the equilibrium constant is given by the pressure (or concentration) of products divided by the pressure (or concentration) of reactants, the equilibrium constant, K, for this system is also small. In the second example, the concentrations of reactants and products are shown to be equal, making the ratio (the equilibrium constant) equal to “1”. In the last example, the products are shown to dominate the equilibrium mixture, making the ratio very large. In these examples, the stoichiometric ratios of the reactants and products are one and there is only one reactant and only one product; if multiple reactants or products are involved, the relationship between their concentrations would be more complex, but that ratio is always given by the expression for K. This fact allows us to take data for an equilibrium reaction and, if K is known, calculate concentrations for reactants and products. Likewise, if all of the equilibrium concentrations are known, we can use these to calculate a value for the equilibrium constant.
In these types of problems, an ICE table is often useful. This table has entries for Initial concentrations (or pressures), Equilibrium concentrations and any Change between the initial and equilibrium states. For example, consider the reaction between carbon monoxide and chlorine to form phosgene, a deadly compound that was used as a gas warfare agent in World War I. (Figure 10.6)
A typical equilibrium problem might read as follows:
A mixture of CO and Cl2 has initial partial pressures of 0.60 atm for CO and 1.10 atm for Cl2. After the mixture reaches equilibrium, the partial pressure of COCl2 is 0.10 atm. Determine the value of K.
The initial pressures for carbon monoxide and chlorine are placed in the first row and the equilibrium pressure for phosgene is placed in the last row. Initially, the pressure of phosgene was zero, so that goes in the first row; the change for phosgene is therefore “+ 0.10 atm”.
=== Initial === | |||
Change
|
|||
Equilibrium
|
Because one mole of CO is required to make one mole of COCl2 the partial pressure of CO must have dropped by 0.10 atm (the Change) in order to make COCl2 with a partial pressure of 0.10 atm, giving a final (Equilibrium) pressure of 0.50 atm for carbon monoxide. Likewise, one mole of chlorine is required to make one mole of COCl2 making the Change for chlorine 0.10 atm and the Equilibrium partial pressure 1.00 atm. The completed table is shown below.
=== Initial === | |||
Change
|
|||
Equilibrium
|
The equilibrium expression for the phosgene-forming reaction is given by Equation 3.
Equation 3.
Substituting the values from the Table into this equation:
Notice that equilibrium constants for gas phase reactions are not typically written with units, although units are sometimes used in equilibrium constants calculated from molar concentrations. Many textbooks differentiate between equilibrium constants calculated from partial pressures and molar concentrations by affixing subscripts; KP and Kc. In this book, we will simply use K and Kc to represent the two; a value for K will always denote a constant calculated from partial pressure data.
Example 10.2 Determining Equilibrium Values
For the reaction shown below, all four gasses are introduced into a vessel, each with an initial partial pressure of 0.500 atm, and allowed to come to equilibrium; at equilibrium, the partial pressure of SO3 is found to be 0.750 atm. Determine the value of K.
Exercise 10.2 Determining Equilibrium Values
For the reaction shown above, the initial partial pressures of SO3 and NO are 0.500 atm under conditions where the equilibrium constant is, K = 9.00. The equilibrium partial pressure for SO2 is found to be 0.125 atm. Calculate the equilibrium partial pressure for SO3.
10.4 Using Molarity in Equilibrium Calculations
editAs we have pointed out several times in the preceding sections, the Ideal Gas Laws (Chapter 10) tell us that the partial pressure of a gas and the molar concentration of that gas are directly proportional. We can show this simply by beginning with the combined gas law:
If we divide both sides by the volume, V, and state that V must be expressed in liters, the right side of the equation now contains the term . Realizing that the number of moles of gas (n) divided by the volume in liters is equal to molarity, M, this expression can be re-written as:
Using this expression, molar concentrations can easily be substituted for partial pressures, and visa versa.
Example 10.3 Using Molarity in Equilibrium Calculations
For the reaction shown below, if the molar concentrations of SO3, NO and SO2 are all 0.100 M, what is the equilibrium concentration of NO2?
Exercise 10.3 arity in Equilibrium Calculations
For the reaction between carbon monoxide and chlorine to form phosgene, the equilibrium constant calculated from partial pressures is K = 0.20. How does this value relate to the equilibrium constant, KC, under the same conditions, calculated from molar concentrations?
10.5 Le Chatelier's Principle: Stress and Equilibria
editConsider a simple chemical system that is at equilibrium, such as dinitrogen tetroxide: nitrogen dioxide. The Law of Mass Action states that when this system reaches equilibrium, the ratio of the products and reactants (at a given temperature) will be defined by the equilibrium constant, K. Now imagine that, after equilibrium has been reached, more dinitrogen tetroxide is introduced into the container. In order for the ratio to remain constant (as defined by K) some of the N2O4 that you added must be converted to NO2. The addition of reactants or products to a system at equilibrium is commonly referred to as a “stress”. The response of the system to this stress is dictated by Le Chatelier's Principle, which states that, if a "stress" is applied to a chemical reaction at equilibrium, the system will readjust in the direction that best reduces the stress imposed on the system. Again, stress refers to a change in concentration, a change in pressure or a change in temperature, depending on the system being examined. If pressure or temperature are changed, the numeric value K will change; if only concentration changes are involved, K does not change. We will consider temperature and pressure effects in General Chemistry, but for now, remember; in a reaction at equilibrium, the introduction of more products will shift the mass balance towards more reactants, but the ratio of Products/Reactants (as defined by the equilibrium expression) does not change, hence, K is unchanged.
10.6 Equilibria involving Acids and Bases
editIn Chapter 8, we learned that a “weak acid” was only partially dissociated in solution, while a “strong acid” was fully dissociated. Now that we better understand the concept of equilibrium, these two classes of Brønsted acids can simply be differentiated based on their equilibrium constants. For an acid, BH, that dissociates in water to form B– and hydronium ion, we can write a simple equilibrium expression, as follows.
Equation 4.
You should note two things in this equation; the term for water does not appear (remember, solids and liquids are never written in equilibrium expressions) and the equilibrium constant for KC is written as Ka to denote that this is an acid dissociation equilibrium. Now, as we learned in Chapter 8, a strong acid is “fully dissociated”, which simply means that [BH] is very, very small, thus Ka for a strong acid is very, very large. A weak acid is only “partially dissociated” which means that there are significant concentrations of both BH and B– in solution, thus Ka for a weak acid is “small”. For most common weak acids, the values for Ka will be in the range of 10-3 to 10-6. As an example, consider acetic acid (the acidic component of vinegar) where Ka = 1.8 × 10-5.
Equation 5.
Example 10.4 Equilibria involving Acids and Bases
A series of acids have the following Ka values: rank these in descending order from the strongest acid to the weakest acid.
A. 6.6 × 10–4B. 4.6 × 10–4C. 9.1 × 10–8D. 3.0 × 102
Exercise 10.4 Equilibria involving Acids and Bases
At 25.0 oC, the concentrations of H3O+ and OH– in pure water are both
1.00 × 10-7 M, making Kc = 1.00 × 10-14 (recall that this equilibrium constant is generally referred
to as Kw). At 60.0o C, Kw increases
to 1.00 × 10-13. What is the pH of a sample of pure water at 60.0o C?
10.7 The pH of Weak Acid Solutions
editFor a solution of a strong acid, calculating the [H3O+] concentration is simple; because the acid is 100% dissociated, the concentration of hydronium ions is equal to the molar concentration of the strong acid (this is, of course, only true for a monoprotic acid such as HCl or HNO3; for H2SO4, [H3O+] = 2 × [H2SO4], etc.). For a weak acid, however, the hydronium ion concentration will be much, much less than the molar concentration of the acid and [H3O+] must be calculated using the value of Ka. We can approach this using an ICE table, like we did for previous equilibrium problems. If we prepared a solution of acetic acid (Figure 10.7)that was exactly 0.50 M, then initially [CH3COOH] is 0.50 M and both [CH3COO–] and [H3O+] are zero. A small amount of CH3COOH will ionize; let’s call this x, making the change for [CH3COOH] “-x”, increasing both [CH3COO–] and [H3O+] by the amount “+x”. Finally, the equilibrium concentration of [CH3COOH] will be (0.50 M – x) and both [CH3COO–] and [H3O+] will be x. The completed table is shown below.
=== Initial === | |||
Change
|
|||
Equilibrium
|
The expression for Ka for acetic acid is given in Equation 5. Substituting for our equilibrium values:
Equation 6.
Equation 6 is a quadratic equation and we could solve it using the standard quadratic formula. This is not necessary, however, because acetic acid is a weak acid and by definition, very little of the dissociated form will exist in solution, making the quantity x very, very small. If x is much, much less than 0.50 M (our initial concentration of acetic acid), then (0.50 M – x) 0.50 M and Equation 6 simplifies to:
We can test our assumption by substituting for x; (0.50 – 0.0030) = 0.497, which rounds to 0.50 to two significant figures. Because the concentration of hydronium ion is very small for a weak acid, for most typical solutions, the concentration of hydronium ion can be estimated simply as:
Equation 7.
where C0 is the initial molar concentration of the weak acid.
Example 10.5 Weak Acid Solutions
a) Nitrous acid (HNO2) is a weak acid with a Ka of 4.3 × 10-4.
Estimate the hydronium ion concentration and the pH for a 0.50 M solution
of nitrous acid in distilled water.
b) Acetic acid is a weak acid with Ka = 1.8 × 10-5. For a solution of
acetic acid in water, the [H3O+] is found to be
4.2 × 10-3 M. What is the concentration of unionized acetic acid in this solution?
c) A solution is prepared in which acetic acid is 0.700 M and its conjugate base,
acetate anion is 0.600 M. As shown above, the Ka of acetic acid
is 1.8 x 10-5; what will the pH of this solution be?
Exercise 10.5 Writing Equilibrium Expressions
What concentration of the weak acid, acetic acid (Ka = 1.8 × 10-5)
must you have in pure water in order for the final pH to be 2.38?
10.8 Solubility Equilibria
editIn Chapter 5 we learned about a class of reactions that involved the formation of a solid that was “insoluble” in water, and precipitated from the solution. In these “precipitation reactions”, one ionic salt was described as “insoluble”, driving the reaction towards the formation of products. Silver chloride is a classic example of this. If you mix silver nitrate (almost all nitrate salts are “soluble” in water) with sodium chloride, a copious white precipitate of silver chloride formed and the silver nitrate was deemed “insoluble” (Figure 10.8).
Nonetheless, if you took the clear solution from above the silver chloride precipitate and did a chemical analysis, there will be sodium ions, nitrate ions, and traces of chloride ions and silver ions. The concentrations of silver and chloride ions would be about 1.67 × 10-5 M, far below the concentrations we typically work with, hence we say that silver chloride is “insoluble in water”. That, of course, is not true. Solubility is an equilibrium in which ions leave the solid surface and go into solution at the same time that ions are re-deposited on the solid surface. For silver chloride, we could write the equilibrium expression as:
In order to write the expression for the equilibrium constant for this solubility reaction, we need to recall the rules stated in Section 10.2 of this chapter; Rule #4 states, “Reactants or products that are present as solids or liquids do not appear in the equilibrium expression.” Because silver chloride is a solid, the expression for the equilibrium constant is simply,
Note that we have denoted the equilibrium constant as Ksp, where “sp” refers to solubility equilibrium, or “solubility product” (the product of the concentrations of the ions). We can calculate the value of Ksp for silver chloride from the analytical data that we cited above; an aqueous solution above solid silver chloride has a concentration of silver and chloride ions of 1.67 × 10-5 M, at 25˚ C. Because the concentrations of silver and chloride ions are both 1.67 × 10-5 M, the value of Ksp under these conditions must be:
This is very small, considering that Ksp for sodium chloride is about 29!
For a salt such as PbI2 (Figure 10.9), chemical analysis tells us that the lead concentration in a saturated solution (the maximum equilibrium solubility under a specified set of conditions, such as temperature, pressure, etc.) is about 1.30 × 10-3 M. In order to calculate Ksp for lead (II) iodide, you must first write the chemical equation and then the equilibrium expression for Ksp and then simply substitute for the ionic concentrations. As you do this, remember that there are two iodide ions for every lead ion, therefore the concentrations for lead (II) and iodide are 1.30 × 10-3 M and 2.60 × 10-3 M, respectively.
Study Points
edit- If two opposing chemical reactions proceed simultaneously at the same rate, the processes are said to be in equilibrium. The two opposing reactions are shown linked with a double arrow (⇄). An example of opposing chemical reactions and their equilibrium expressions are:
The equilibrium would be written as: N2(g) + 3 H2(g) ⇄ 2 NH3(g)
- An equilibrium constant (K) is a numerical value that relates the concentrations of the products and reactants for a chemical reaction that is at equilibrium. The numeric value of an equilibrium constant is independent of the initial concentrations of reactants, but is dependent on the temperature. Equilibrium constants are generally not written with units (although they may be).
- Because equilibrium constants are written as the concentrations (or partial pressures) of products divided by the concentrations (or partial pressures) of reactants, a large value of K means that there are more products in the equilibrium mixture than there are products. Likewise, a small value of K means that, at equilibrium, there are more reactants than products.
- Equilibrium constants that are based on partial pressures are often written as KP, while equilibrium constants based on molar concentrations are written as Kc.
- An expression for an equilibrium constant can be written from a balanced chemical equation for the reaction. The Law of Mass Action states the following regarding equilibrium expressions:
- Partial pressures (or molar concentrations) of products are written in the numerator of the expression and the partial pressures (or concentrations) of the reactants are written in the denominator.
- If there is more that one reactant or more that one product, the partial pressures (or concentrations) are multiplied together.
- The partial pressure (or concentration) of each reactant or product is then raised to the power that numerically equals the stoichiometric coefficient appearing with that term in the balanced chemical equation.
- Reactants or products that are present as solids or liquids do not appear in the equilibrium expression.
- As an example of an equilibrium expression, consider the reaction of nitrogen and hydrogen to form ammonia. The partial pressure of ammonia will be in the numerator, and it will be squared. Because there are two reactants, the partial pressures for nitrogen and hydrogen will be multiplied in the denominator. The partial pressure of nitrogen will be raised to the “first power” (which is not shown) and the partial pressure of hydrogen will be cubed.
- If equilibrium values for a given reaction are known, the equilibrium constant can be calculated simply by substituting those values in the equilibrium expression. Quite often, however, initial and equilibrium values are only given for selected reactants and products. In these cases, initial and equilibrium values are arranged in an ICE Table, and the changes between initial and equilibrium states are calculated based on reaction stoichiometry.
- Because the partial pressure of a gas and the molar concentration of that gas are directly proportional, the ideal gas law can be rearranged as follows, to give an expression relating molarity and partial pressure of a gas.
- Le Chatelier's Principle states that, if a "stress" is applied to a chemical reaction at equilibrium, the system will readjust in the direction that best reduces the stress imposed on the system. In this context, stress refers to a change in concentration, a change in pressure or a change in temperature, although only concentration is considered here. If pressure or temperature are changed, the numeric value K will change; if only concentration changes are involved, K does not change. In a reaction at equilibrium, the introduction of more products will shift the mass balance towards more reactants, and the introduction of more reactants will lead to the formation of more products, but the ratio of Products/Reactants (as defined by the equilibrium expression) does not change, hence, K is unchanged.
- For a weak acid, dissociating in water to form it's conjugate base and hydronium ion, the equilibrium constant is referred to as Ka. Because a weak acid is only "partially dissociated", the concentration of BH in solution is large, thus Ka for a weak acid is "small" (in the range of 10-3 to 10-6). For example, acetic acid (the acidic component of vinegar), has an acid dissociation constant of Ka = 1.8 x 10-5.
- For a solution of a weak acid in water, the concentration of hydronium ion will be very small. If the concentration of the weak acid is fairly large (typically > 0.01 M) the concentration of the undissociated acid will be much larger than [H3O+]. Because of this, the hydronium ion concentration (hence, the pH) can be fairly accurately estimated from the Ka of the weak acid and the initial concentration of the acid (Co), by the equation:
- The equilibrium constant defining the solubility of an ionic compound with low solubility is defined as Ksp, where “sp” refers to “solubility product”. Because reactants or products that are present as solids or liquids do not appear in equilibrium expressions, for silver chloride, the expression Ksp will be written as:
- For silver chloride, the solubility at 25 oC is 1.67 × 10-5 M. That means the concentrations of silver and chloride ions in solution are each 1.67 × 10-5 M, making the value of Ksp under these conditions:
Supplementary Problems
edit[http://askthenerd.com/COL/images/Ch10.html Please follow this link...
Nuclear Chemistry
Chapter 11. Nuclear Chemistry
editIn today’s society, the term radioactivity conjures up a variety of images. Nuclear power plants producing hydrocarbon-free energy, but with potentially deadly by-products that are difficult to store safely. Bombs that use nuclear reactions to produce devastating explosions with horrible side effects on the earth as we know it and on the surviving populations that would inhabit it. Medical technology that utilizes nuclear chemistry to peer inside living things to detect disease and the power to irradiate tissues to potentially cure these diseases. Fusion reactors that hold the promise of limitless energy with few toxic side products. Radioactivity has a colorful history and clearly presents a variety of social and scientific dilemmas. In this chapter we will introduce the basic concepts of radioactivity, nuclear equations and the processes involved in nuclear fission and nuclear fusion.
11.1 Radioactivity
editThe actual discovery of radioactivity is generally attributed to the French scientist, Henri Becquerel in 1896. As with most discoveries, he was working on something else. In this case it was the nature of phosphorescence; the property of some substances to “glow in the dark” after being exposed to light. In the course of his work, he allowed photographic plates to come in contact with uranium salts, only to find out that the uranium had “fogged” the unexposed plates (Figure 11.1). Further work by Becquerel and others (including Marie Curie) led to the realization that certain elements spontaneously produced a variety of particles, some of which were charged (both positive and negative) and one class that was of higher energy, but appeared to be neutral. The three basic classes of particles were characterized and identified as “alpha”, “beta”, and “gamma” particles (Figure 11.2). Alpha particles were positive, relatively massive and, subsequent work showed that they were identical to the nucleus of the helium atom, containing two protons and two neutrons. Beta particles had a very small mass. They were of higher energy and they carried a negative charge; equivalent in mass and charge to an electron. Gamma particles (actually referred to as gamma rays) were much more energetic, appeared to be neutral and were comparable to a high-energy photon of light. Although it was not apparent immediately, one of the most surprising observations regarding radioactive elements was that as they emitted particles, the identity of the element slowly changed; uranium, for example, slowly became enriched with lead.
When alpha, beta or gamma particles collides with a target, some of the energy in the particle is transferred to the target, typically resulting in the promotion of an electron to an “excited state”. In many “targets”, especially gasses, this results in ionization, and alpha, beta and gamma radiation is broadly referred to as ionizing radiation. A Geiger counter (or Geiger-Müller counter) takes advantage of this in order to detect these particles. In a Geiger tube, the electron produced by ionization of a captive gas travels to the anode and the change in voltage is detected by the attached circuitry. Most counters of this type are designed to emit an audible “click” in response to the change in voltage, and to also show it on a digital or analog meter. A simple schematic of a Geiger counter is shown in Figure 11.3.
Today, we recognize that radioactive decay is actually quite complex, but the basic principles and patterns that were established over 100 years ago still stand. The three basic subatomic particles that occur in radioactive decay are the alpha particle, the beta particle and the gamma ray. The gamma ray is of highest energy (and perhaps the greatest ultimate danger), but from a chemistry standpoint, the alpha and beta particles are of the greatest interest. An alpha particle consists of two protons and two neutrons. It has a mass of four amu and a charge of +2. It is identical with the helium nucleus, and when a radioactive element emits an alpha particle, it loses four amu from its nucleus, including two protons (Figure 11.4). Because the number of protons in a nucleus define the identity of the element, the atomic number of the element decreases by two when it loses an alpha particle; thus uranium ( ) loses an alpha particle and becomes an atom of thorium ( ); we will discuss this process further in the following section. In order for a beta particle (an electron) to emerge from the nucleus, it must be formed by the decomposition of a neutron (on a very simple scale, think of a neutron as being composed of a positive proton bound to a negative electron). When a neutron decays and emits a beta particle, it leaves behind the newly formed proton. Again, this changes the identity of the element in question.
11.2 The Nuclear Equation: Alpha Particle Emission
editIn Chapter 1, we described the meaning of the atomic symbol for an element. In the atomic symbol, the atomic number (the number of protons in the nucleus) appears as a subscript preceding the symbol for the element. The mass number appears as a superscript, also preceding the symbol. Thus for uranium (atomic number 92) with a mass of 238, the symbol is . To show radioactive decay in a chemical equation, you need to use atomic symbols. Thus, for the loss of an alpha particle from , you need to show uranium on the “reactant” side of the equation and thorium and the alpha particle on the “product” side. Just like any other chemical equation, a nuclear equation must balance. The sum of the mass numbers on the reactant side must equal the sum of the mass numbers on the product side. Because we started with uranium-238 and lost four mass units in the alpha particle, the product (or products) of the decay must have a total mass of (238 – 4) = 234. We have also removed two protons from the uranium nucleus, dropping the atomic number by two. The newly formed element is therefore thorium-234.
In this equation, we have shown the alpha particle using the atomic symbol for helium ( ), but this is often shown using the symbol (Figure 11.5). Compounds that emit alpha particles are very toxic, in spite of the poor penetrating ability of the particle. This is especially true if the emitting element is inhaled or ingested. The toxic dose of the alpha-emitter in a 175-pound person has been estimated to be about one microgram (1 × 10-6 g).
Example 11.1 Writing Nuclear Equations
Thorium-230 and polonium-210 both undergo loss of an alpha particle to
form different elements. For each of these radioactive decay processes, write
the appropriate nuclear equation and show the nature of the elements that are formed.
Exercise 11.1 Writing Nuclear Equations
Radium-226 and polonium-214 both undergo loss of an alpha particle to form
different elements. For each of these radioactive decay processes, write the
appropriate nuclear equation and show the nature of the elements that are formed.
11.3 Beta Particle Emission
editIn an element with an “excess” of neutrons, one of these neutrons can break down to form an electron and a proton. In this process, an antinutrino is also produced, but because it has no mass, it is generally ignored in this process. The nuclear equation for the decomposition of a neutron can be written:
where the neutron has the symbol, , the proton has the symbol, , and the electron that is produced is called a beta particle, with the symbol (Figure 11.6). Because the nuclear equation must balance for mass and atomic numbers, the “atomic number” of the beta particle must be –1. Adding the atomic numbers on the right side of the equation shown above gives {(-1) + (+1) = 0}; identical to the “atomic number” in the neutron ( ); (even though a neutron can break down to produce a proton, there are no actual protons in a neutron, hence its atomic number is zero). Likewise, the “mass number” of the beta particle must be zero because the proton (the product) and the neutron (the reactant) each have a mass of one. Therefore, when a nucleus loses a beta particle, the number of neutrons in the nucleus decreases by one, but the mass number does not change; the neutron is converted into a proton, also having a mass number of one. Because the neutron is converted into a proton, the atomic number of the element increases by one unit, changing the identity of the element to the next highest in the periodic table. For example, thorium-234 undergoes loss of a beta particle to form pennsylvanium-234 by the equation shown below.
Again, with a beta-particle emission, the mass number does not change, but the atomic number increases by one unit.
Example 11.2 Beta-Particle Emission
Bismuth-210 and lead-214 both undergo loss of a beta particle to form
different elements. For each of these radioactive decay processes, write the
appropriate nuclear equation and show the nature of the elements that are formed.
Exercise 11.2 Beta-Particle Emission
Chlorine-39 and strontium-90 both undergo loss of a beta particle to form different
elements. For each of these radioac