Wikibooks

File:3D printed parts for face shields.jpg

Original file ‎(3,024 × 4,032 pixels, file size: 552 KB, MIME type: image/jpeg)

Summary

Description
English: One stack of 3D printed parts for face shields, produced by ESA's European Astronauts Centre (EAC), in bags and ready for delivery to a central collection point of the MakerVsVirus initiative. This is where the face shields are assembled and then sent to local hospitals in the fight against COVID-19.
Date
Source https://www.esa.int/ESA_Multimedia/Images/2020/04/3D_printed_parts_for_face_shields#.XqbFH43LvF8.link
Author ESA


Licensing
This media was created by the European Space Agency (ESA).
Where expressly so stated, images or videos are covered by the Creative Commons Attribution-ShareAlike 3.0 IGO (CC BY-SA 3.0 IGO) licence, ESA being an Intergovernmental Organisation (IGO), as defined by the CC BY-SA 3.0 IGO licence. The user is allowed under the terms and conditions of the CC BY-SA 3.0 IGO license to Reproduce, Distribute and Publicly Perform the ESA images and videos released under CC BY-SA 3.0 IGO licence and the Adaptations thereof, without further explicit permission being necessary, for as long as the user complies with the conditions and restrictions set forth in the CC BY-SA 3.0 IGO licence, these including that:
  • the source of the image or video is duly credited (Examples: "Credit: ESA/Rosetta/NavCam – CC BY-SA IGO 3.0", "ESA/DLR/FU Berlin, CC BY-SA IGO 3.0", "ESA/Photographer’s name, CC BY-SA IGO 3.0"), and
  • a direct link to the CC BY-SA 3.0 IGO license text is provided, and
  • if changes were made to the original image or video, there is a clear statement on the Adaptation indicating that changes were made to the original content; Adaptations must be Distributed or Publicly Performed under the Applicable License, as set forth in Article 4b of the CC BY-SA 3.0 IGO licence.
See the ESA Creative Commons copyright notice for complete information, and this article for additional details.
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-ShareAlike 3.0 IGO license.
Attribution: ESA, CC BY-SA IGO 3.0
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

27 April 2020

MIME type

image/jpeg

checksum

8fcba350ab534ed8a0fd7d917733508b7676019f

determination method: SHA-1

data size

565,044 byte

height

4,032 pixel

width

3,024 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:43, 27 April 2020Thumbnail for version as of 11:43, 27 April 20203,024 × 4,032 (552 KB)Killarnee{{Information |description ={{en|1=One stack of 3D printed parts for face shields, produced by ESA's European Astronauts Centre (EAC), in bags and ready for delivery to a central collection point of the MakerVsVirus initiative. This is where the face shields are assembled and then sent to local hospitals in the fight against COVID-19.}} |date =27/04/2020 |source =https://www.esa.int/ESA_Multimedia/Images/2020/04/3D_printed_parts_for_face_shields#.XqbFH43LvF8.link |author...

The following 2 pages use this file:

Retrieved from "https://en.wikibooks.org/wiki/File:3D_printed_parts_for_face_shields.jpg"