Do-It-Yourself/Shoe polish< Do-It-Yourself
Home-made shoe polishEdit
Neutral Colour Shoe PolishEdit
To make a neutral-colour, home-made shoe polish, you would need:
- Soap flakes 30 g (1 oz)
- Potassium carbonate 15 g (0.5 oz) (Obtain from chemist/pharmacist)
- Beeswax 150 g (5oz)
- Gum arabic powder 15 g (0.5 oz)
- Icing sugar 45 g (1.5 oz)
Slice the beeswax and add to 568 ml (a pint) of water. Stir in the soap flakes and potassium carbonate. Boil until a smooth paste. Whilst the mixture is still hot (turn off the heat, but act quickly), add and stir the gum arabic powder and icing sugar. For a specifically black polish, 280 g (10 oz) of charcoal powder from the chemist may be added at this stage.
Note that the above recipe uses potassium carbonate (potash) whereas the following recipe uses potassium bicarbonate, which is not potash. Imperial Measures are in brackets.
Black Shoe PolishEdit
Melt wax in boiling water and stir in the potassium, using a large pot to allow for the mixture foaming up. Dissolve the nigrosene in a little cold water and stir it in thoroughly, bring to the boil, and simmer gently for some minutes, stirring it until it creams. Take mixture off the fire, and stir in the turpentine. Put away in small tins, tightly closed.
[ ... p194: ] N.B.- In following recipes which contain kerosene, methylated spirit, turpentine, petrol, benzine or any other inflammable ingredient, great care must be observed to avoid making preparation near a lighted stove or naked flame of any kind.
[p192,194 The New P.W.M.U. Cookery Book, 1941, Presbyterian Women's Missionary Union of Victoria (Australia)]
Machines to be used