Circuit Theory/Convolution Integral/Examples/Example42
Given that Vs = (1 + 2t)μ(t), find io using the convolution integral.
Transfer function
editsimplify((1/(1+s))/((s+1/(1+1/(1+s)))*(1 + 1/(1 + s))))
solve(s^2 + 3*s + 1,s)
Homogeneous Solution
editTwo real, different roots:
So Io has this form:
Particular Solution
editAfter a very long time, inductors are shorts, the voltage across both 1 ohm resistors is 1 volt, so io is 1 amp:
Initial Conditions
editAdding the particular and homogeneous solutions together, have this form:
After a long period of time (using the particular initial condition again), the current is going to be 1:
Initially, the two inductors are going to be opens, thus io has to be 0:
Initially, all the drop is going to be across the first inductor, leaving the voltage across the second zero. The current io flows through both the second inductor and it's serial resistor, so an equation for this voltage can be obtained by taking the derivative:
solve([1+A+B,s1*A + s2*B],[A,B])
So:
Impulse Solution
editTaking the derivative of the above get:
Convolution Integral
editsyms t x s1 = (-3 + sqrt(5))/2; s2 = (-3 - sqrt(5))/2; f = (s1*s2/(s1-s2)*(exp(s1*(t-x))-exp(s2*(t-x)))*(1+2*x)); S =int(f,0,t); vpa(S, 3)
At t=0:
Which means that C_1 = 0 so finally: