Ada Programming/Attributes/'Code Address

Description

The 'Address attribute may be applied to subprograms in Ada 95 and Ada 2005, but the intended effect seems to be to provide an address value which can be used to call the subprogram by means of an address clause as in the following example:

procedure K is ...

procedure L;
for L'Address use K'Address;
pragma Import (Ada, L);

A call to L is then expected to result in a call to K. In Ada 83, where there were no access-to-subprogram values, this was a common work-around for getting the effect of an indirect call. GNAT implements the above use of Address and the technique illustrated by the example code works correctly.

However, for some purposes, it is useful to have the address of the start of the generated code for the subprogram. On some architectures, this is not necessarily the same as the Address value described above. For example, the Address value may reference a subprogram descriptor rather than the subprogram itself.

The 'Code_Address attribute, which can only be applied to subprogram entities, always returns the address of the start of the generated code of the specified subprogram, which may or may not be the same value as is returned by the corresponding 'Address attribute.