3D Printing/Post Processing

General Post Processing Techniques

edit

Sanding is commonly used on 3D prints to smooth prints or remove small imperfections.[1]

Acrylic paint, model paint, nail polish, markers, and spray paint are common ways to add color to a print.[2][3]

Salt annealing and plaster annealing can give parts a unique finish, and alter strength properties of a print.[4][5] Annealing techniques may be effective to improve prints with slight warping.[6]

 
A 3D pen can be used on its own as seen here, but can also be used to add small details after printing.

Process Specific Techniques

edit

Post Processing is mandatory for most SLA prints, as extra resin must be removed and desired resin must be hardened.[7][8]

Prints made with ABS plastic can be smoothed with careful application of an acetone vapor.


References

edit
  1. "Mansfield Library". www.lib.umt.edu. Retrieved 29 November 2020.
  2. Jalal, Rita. "Coloring 3D Printed Objects – build IT @SDSU Library". Retrieved 29 November 2020.
  3. "3D Print Customization Florida State University Libraries". www.lib.fsu.edu. Retrieved 29 November 2020.
  4. "Take This 3D-Print Post-Processing Method With A Grain Of Salt". Hackaday. 27 October 2020. Retrieved 6 November 2020.
  5. "Plaster Annealing 3D Prints For Strength". Hackaday. 24 September 2020. Retrieved 6 November 2020.
  6. "Final Update: FFF Strength Optimization". Additive Manufacturing blog. 2165. Retrieved 29 November 2020. {{cite web}}: Check date values in: |date= (help)
  7. "3D Printering: Wash Parts Better And Make Solvent Last Longer". Hackaday. 6 October 2020. Retrieved 6 November 2020.
  8. "customer_v2". support.formlabs.com. Retrieved 6 November 2020.