Last modified on 14 July 2012, at 15:56

Electronics/Electrolysis

Electrolysis involves an electric field and the motion of electrons through a liquid.

GCSE Science/Electricity


Electrolysis is the decomposition of certain types of substance using electricity.The types of substance that can be split are ionic substances.This just means that they are made of charged ions rather than neutral atoms.{Remember that an ion is just an atom that has either a positive or negative charge}. An example of an ionic substance is common table salt sodium chloride. The sodium atom has a positive charge, the chlorine atom has a negtive charge. It is usually written as Na+Cl-.

Q1) Check in a periodic table, what is the symbol for sodium Na or Cl?

As you may already know if you've studied the Metals module, a salt is any substance made by combining an acid with an alkali. Acids, alkalis, and therefore all salts are ionic.

Q2) Which of the following substances can be broken up by electrcity Sodium chloride, iron sulphate, copper nitrate?

Basic Experimental SetupEdit

File:Simple electrolysis setup.png
The liquid electrolyte is connected
to a battery or power supply.
The electrodes must not touch!

Most ionic compounds are not liquid at room temperature. This is a problem because the ions need to be able to move for the electric current to be able to flow. This can be achieved by melting. Look at the electrical setup shown on the right. The electrodes are just tqwo carbon rods connected to a battery. The one connected to the positive electrode is called the anode. The one connected to the negative electrode is called the cathode.

Consider for example the compound lead bromide. This compound is a solid at room temperature but can be molten over a Bunsen flame. So what you would do is put some lead bromide into a beaker. Put the beaker on a tripod over a bunsen flame. Melt the lead bromide, then put in the electrodes and turn the power supply on at a setting of say 2V. What you would see happening is the anode, is a silvery coating of pure lead forming, and bromine forming at the cathode. The current would continue to flow until all the lead bromide was turned into lead and bromine.

Q3) It takes energy to split uo a compound like lead bromide. Where does this energy come from ?

Q4) Predict what products you would get at the anode and cathode if copper chloride was the electrolyte.

What happens at the anodeEdit

Electrolysis anode.png
The bromine atoms (blue)
give up 2 electrons each (green) to the anode.

The anode is the positive electrode. It attracts negatively charged ions, because unlike charges attract. The bromine ions move through the melt until they reach the anode. Once they get there, they give up their two extra electrons to become bromine atoms.

Br2- --> Br + 2e-

The electrons flow up the anode to the positive terminal of the battery.

What happens at the cathodeEdit

The cathode is the negative electrode. It attracts the positively charged ions. Metal ions are always positive and so the lead ions flow through the melt until they get to the cathode. Once they get there they take two electrons each from the cathode. The electrons flow down the cathode from the negatively terminal of the battery and onto the lead ions.

Pb2+ + 2e- --> Pb

Q5) Solid ionic substances do not conduct electricity and are not split up by it. Why do you think that is?

Quantity calculations (higher tier only)Edit

Electrolysis copper sulphate.png

In the experiment with lead bromide, you saw that lead was deposited at the cathode. If you actually do the experiment you will see that the lead coats the cathode. In this section we will look at how much metal will coat a cathode in a given time.

A scientist performed the following experiment.

  • A copper cathode was carefully cleaned and accurately weighed.
  • It was placed along with an abnode into a solution of copper sulphate.
  • It was connected via a ammeter to a variable power supply.
  • A current was left to run for a given time then the cathode was removed and weighed again.

His results were:

Current /A Time /s Mass of copper deposited /g
1 3000 1.0
2 3000 2.0
2 1500 1.0
1 1500 1.0

You can see from the results that the total amount of copper deposited depends on both the current and the time it flows. This is because the number of copper atoms that can be made from ions depends on the total amount of charge that flows. The unit of charge is the coulomb.

One coulomb is the amount of charge when one Amp flows for one second (see GCSE Science/Measuring electricity

Q6)Look at the results table above. How much copper is deposited when 1A flows for 3000 seconds?

Q7)How much copper do you predict would be doposited if 1A were to flow for 6000 seconds.

Q8)What about if 2A were to flow for 12000 seconds ?

Electrolysis of Aqueos solutions (Advanced)Edit

Before studying this section check with your teacher to see if you need to.

Earlier on in this module you've learned that ions must be able to move in order for electrolysis to work. If the ions are held rigid {such as in a solid}, they can't move and no electricity will flow. We've looked at how the frreing up of ions can occur by melting the electrolyte. Another way to achieve this is by dissolving th electrolyte in water. The trouble with this method is, there will be mor than one type of ion present.

water partially splits up into ions {this is why it's such a good solvent for ionic compounds}.It splits into hydrogen ions and hydroxide ions.

H2O --> H+ +OH-

So at the cathode there will be two ions present. The Metal ion and the hydrogen ion from the water. Which element is actually produced at the cathode depends on how reactive the metal is. If the metal is very reactive, such as potassium, or sodium, then hydrogen will be produced. If the metal is unreactive such as silver, the metal will be produced.{I hope you learned your displacement reactions in lower school}. To work out which ion wins, the metal or the hydrogen, compare their reactivities in a the reactivity series. The one that is most reactive, will not be produced at the cathode.

A similar situation occurs at the anode. Hydroxide ions {from the water} are usually discharged at the anode ultimately producing oxygen.

OH- --> OH + e-

4OH --> 2H2O + O2.

This is true for most things but if the ions are bromine, chlorine, or fluorine {i.e. a halogen} then the halogen will be produced. {You are unlikely to need to remember this, only understand it}

Q9) Sodium chloride is dissolved in water and subjected to electrolysis. Explain what you see at each of the electrodes.

Summary
Only ionic substances can be split up by electrolysis
The ionic compounds need to be melted or dissolved in water so the ions can move
Positive ions are attracted to the cathode, where they pick up electrons from the electrode
Negative ions are attracted to the anode where they give electrons to the electrode

Answers | <<Advanced static electricity | Circuits>>

ElectroplatingEdit